b d RDO-1 Rolling Door Openers User Guide
- June 13, 2024
- b d
Table of Contents
PowerDrive & Roll-A-Pro
RDO-1 Rolling Door Openers
User Guide
Rolling Door Openers
Quick Operation Guide
USER OPERATING CONTROLS
| Button | Function |
|---|---|
| 1 | Open / Stop / Close |
| 2 | Flashes when a code is being stored or when a remote control button is |
pressed.
3| Flashes as the door closes and remains on when closed.
4| Flashes as the door opens and remains on when opened.
5| Indicates when the opener requires service.
6| Is used for storing or erasing remote control buttons for door operation.
MANUAL DOOR OPERATION
TO DISENGAGE THE OPENER
It is recommended to disengage the door with the door in the closed position.
CAUTION: When the opener is manually disengaged, the door is no longer locked. To lock the door manually, re-engage the opener after the door is closed.
TO ENGAGE THE OPENER
WARNING! Please test the manual release mechanism to ensure that the manual release is easy to operate. No more than 20kg of force should be required to disengage the door using the manual release cord. IF excessive force is required, contact your dealer.
CODING A REMOTE CONTROL
The opener can only be operated from remote controllers that have been programmed into its memory. Up to 64 remotes (8 for Roll-A-Pro) can be programmed.
CODING REMOTE FROM THE OPENER
| S TEP ONE | STEP TWO |
|---|---|
| STEP THREE | STEP FOUR |
REMOTELY CODING A REMOTE CONTROL
Remotely coding works when you have a pre-coded remote control and are in
range of the opener.
| STEP ONE | STEP TWO |
|---|---|
| STEP THREE | STEP FIVE |
| Opener flashes & beeps | Opener stops flashing & beeping |
CHANGING A BATTERY
Battery Type: 1 x CR2032.
STEP ONE
| Light Status | Battery |
|---|---|
| Solid | OK |
| Flashing | Replace |
| No light | Replace |
| STEP TWO | STEP THREE |
| --- | --- |
WARNING!:
The battery is hazardous and must be kept out of reach of children. The
battery can cause severe of fatal injuries within 2 hours or less if swallowed
or placed inside any part of the body. If you suspect the battery has be
swallowed or placed inside any part of the body, SEEK IMMEDIATE medical
attention.
SMART PHONE CONTROL
(Requires Smart Hub)
The Smart Phone Control works via your home’s WiFi network. Initial set up
involves linking your phone app and smart hub to your home network.
WARNING!:
This device allows for operation of the door when not in line-of-sight of the
door and opener. The door may operate unexpectedly, therefore do not allow
anything to stay in or near the path of the door.
BEFORE YOU START
| STEP ONE | STEP TWO |
|---|---|
STEP THREE
TROUBLESHOOTING
| Symptom | Possible cause | Remedy |
|---|---|---|
| The opener does not work from the remote | The opener does not have power |
The battery in the remote control is flat
The remote button is not programmed to operate the door.
CODE SET LED is flashing yet the opener is not working.| Plug a device of
similar voltage (e.g. a hairdryer) into the power point and check it is OK.
Replace the battery
Code in the remote control button
Ensure the correct button on the transmitter is being pressed.
One remote works but the other/s do not| Faulty remote control Flat battery|
Replace remote control Replace battery
The motor is running but the door remains stationary| The opener is
disengaged| Re-engage the opener
The remote range varies or is
restricted| Variations are normal depending on conditions e.g. temperature or
external interference The battery life is exhausted| Make sure you can see the
door when you use the remote control
Check the battery status as per section 4 of this guide
The opener light does not work.| LED has failed| Contact dealer to organize
LED to be changed.
The door reverses for no apparent reason| If Safety beams are installed they
may be partially obstructed| Ensure the beam path is not obstructed. Check the
alignment of the beams
The door stops of moves very slowly| Garage door in poor condition e.g.
springs may be broken
(Optional Battery Back Up Accessory) the batteries may have little OR no
charge| Check the door’s operation
Connect mains power and leave the batteries to charge. The batteries may take
24 to 48 hours to reach their maximum charge capacity.
CARING FOR YOUR OPENER
Preventative servicing of your garage door and opener, is important. Your
garage door is made up of numerous moving parts designed to lift and lower
your door safely and efficiently.
Ongoing preventative servicing ensures that your door continues to function
within factory specifications, greatly reduces the risk of failure and repair
bills down the track and ensure you maintain your Warranty.
Refer to your Owners Opener Handbook for your service schedule available
HERE.
Refer to the installation manual for monthly testing procedures in Section 11
to ensure garage door is fit for use available HERE.
Online warranty details are available HERE.
NEED A SERVICE CALL?
If the opener needs a service please call the dealer who installed the garage door opener (their contact details are usually on a sticker on the back of your garage door).
For product assistance, general enquiry or
more information, please visit:
bnd.com.au
or call 13 62 63.
References
- B&D Garage Doors - Safe and Secure Australian Garage Doors - B&D Australia
- B&D Garage Doors - Safe and Secure Australian Garage Doors - B&D Australia
- Garage Door Warranty - B&D Australia
- Roller Motor Manuals - Trade Resources - B&D Australia
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>