T LE 2A5LA-ME06 ME06 Two in One Wireless Charging User Manual

June 13, 2024
T LE

2A5LA-ME06 ME06 Two in One Wireless Charging
User Manual

ME06
Two in one wireless charging

Product overview

T LE 2A5LA ME06 ME06 Two in One Wireless Charging - Product
overview

Power & Indicator Light

Introduction: Put the devices in a proper position to start wireless charging;
PS: Press the button to activate wireless charging for iWatch.

Charging Indicator

| 0-25%
| 25-50%
| 50-75%
| 75-99%
| Finish charging
Power Display
| 0%, no power and in low power protection
| 1-5`)/0
| 5-25%
| 25-50%
| 50-75%
| 75-100%

Parameter specification

Model: ME06 Two in one wireless charging
Battery Capacity: 5000mAh/3.7V/18.5Wh
Type-C Output/Input :5V 2A, 10W
Wireless Charging for Phone :5V 1A, 5W
Wireless Charging for iWatch :5V 0.5A, 2.5W
Size :1196913.85MM
Weight :150g

Thanks for choosing us!

Ultra-lightweight [3 in 1] wireless charger for Fun of digital products. Please kindly read the user manual before using and keep it for future reference.T LE 2A5LA ME06 ME06 Two in One Wireless Charging -
choosing

Note:

  1. Wireless charging is compatible with iPhone 12\13\14\15 and newer versions ONLY.
  2. There will be some heat, slow charge, or no charge when wireless charging for other brands’ phones.
  3. Cable charging is more preferable to charge for other brands’ (charging cable is not included) .

T LE 2A5LA ME06 ME06 Two in One Wireless Charging -
INGXMOTMIGHRK

Notes

  1. Wireless charging function is not compatible with non-magnetic phones.
  2. It is advisable not to wireless charge iPhone with a case on.
  3. Do not use corrosive liquid to clean this product.
  4. In case of accidental contact with chemicals, please wipe clean with a damp cloth.
  5. Avoid using the wireless charger in corrosive environments to prevent damage to the product.
  6. Keep a safe distance from magnetic strips or chip cards (ID cards, bank cards, etc.) to prevent magnetic interference.
  7. Maintain a distance of at least 20 centimeters between implantable medical devices (pacemakers, implantable defibrillators, etc.) and the wireless charger to avoid potential interference with medical devices.
  8. Supervise children to ensure they do not play with the wireless charger as a toy to prevent unnecessary accidents.
  9. Do not squeeze, impact, or attempt to disassemble the power bank.
  10. Do not touch the power bank with sharp objects to avoid scratching.
  11. Do not insert any foreign objects into the power bank as it may damage electronic components.
  12. Please do not leave it unused for long. If not used for more than a month, please charge it promptly to ensure normal operation.

Battery Warning !
There is a built-in lithium battery in this product.
To avoid explosion, do NOT expose the product to intense sunlight, fire or throw it into fire.

FCC Caution

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals