SCT USB3-1X2-028TM Camera Extension Kits User Guide
- June 13, 2024
- SCT
Table of Contents
SCT USB3-1X2-028TM Camera Extension Kits
Product Information
- Product Name: USB3-1×2-028TM
- Application: Poly EagleEyeIV USB
- Power Supply: W PS-1230VDC 100-240V 47-63Hz
- USB Cable: RCC-M008-1.0M
- Camera Power Cable: PPC-028-1.0M
- Optional Third-Party Controller: Momentary or Latching Relay
- Module Dimensions: H: 1.07 in (27mm) x W: 3.81 in (96mm) x D: 3.58 in (90mm)
Product Usage Instructions
To use the USB3-1×2-028TM, follow the steps below:
- Connect the USB3-1×2-028TM to the power supply using the W PS-1230VDC 100-240V 47-63Hz power supply unit.
- Connect the USB cable (RCC-M008-1.0M) to the USB3-1x2TM module.
- Connect the camera power cable (PPC-028-1.0M) to the USB3-1x2TM module.
- If using an optional third-party controller, configure it to either momentary or latching relay mode.
- For momentary control input, set DIP Switch 1 to On and DIP Switch 2 to Off.
- For latching control input, set DIP Switch 2 to On.
- Connect the USB cable (RCC-M008-1.0M) from the USB3-1x2TM module to your laptop.
- If using a room PC, connect the USB cable (RCC-M008-1.0M) from the USB3-1x2TM module to the room PC.
Note: The USB3-1x2TM module dimensions are H: 1.07 in (27mm) x W: 3.81 in (96mm) x D: 3.58 in (90mm).
INSTRUCTION
Module Dimensions
USB3-1x2TM:H:1.07″(27mm)xW :3.81″(96mm)xD:3.58″(90mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>