SCT RTK-MINI-USB Transmitter Module For Camera User Guide
- June 13, 2024
- SCT
Table of Contents
SCT RTK-MINI-USB Transmitter Module For Camera
Product Information
- Product Name: RTK-MINI
- Updated: 8/15/2023
- Supported Connections: USB-A to USB-C, RJ45 to RJ45 UTP Control Cable, HDMI to HDMI Video Cable, USB Micro B to USB-A
- Supported Interfaces: Ethernet/POE, HDMI, USB
Product Usage Instructions
- USB-A (RTK-MINI-RXTM) to USB-C:
- This cable can be used on either the transmitter (Tx) or receiver (Rx) device.
- RJ45 to RJ45 UTP Control Cable:
- Use this cable to establish a connection between two devices using RJ45 ports for control purposes.
- Ensure that the cable used is a single, point-to-point CAT cable with no couplers or interconnections.
- HDMI to HDMI Video Cable:
- Use this cable to connect devices that have HDMI ports for video transmission.
- TM Ethernet/POE:
- This interface supports Ethernet and Power over Ethernet (PoE) functionality.
- The cable used for Ethernet/POE must be Cisco provided.
- USB Micro B (RTK-MINI-TXTM) to USB-A:
- Use this cable to connect a device with a USB Micro B port to a device with a USB-A port.
Note: The pin configurations provided (1 2 3 4 5 6 7 8 g G o B b O br BR and 1 2 3 4 5 6 7 8 o O g B b G br BR) are likely used for reference or troubleshooting purposes and may not be directly related to product usage instructions.
RemoteTableKit-Mini™ RTK-MINI-USB™ Application Guide
Module Dimensions
- RTK-MINI-TXT. H: 1.394″ (35mm) x W: 7.283″ (185mm) x D: 4.484″ (114mm)
- RTK-MINI-RX™M. H: 1.394″ (35mm) x W: 7.283″ (185mm) x D: 4.484″ (114mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>