SCT RTK-PLUS Remote Table Kit Plus User Guide
- June 13, 2024
- SCT
Table of Contents
SCT RTK-PLUS Remote Table Kit Plus
Product Information
The RemoteTableKitTM RTK-PLUSTM for Cisco Webex Codec EQ is an application guide designed to enhance the functionality and usability of Cisco Webex Codec EQ. It provides users with a comprehensive set of tools and accessories to optimize their video conferencing experience.
The kit includes the following components
- RCC-M006-1.0M USB-B Micro to USB-A cable (purchased separately)
- HDMI USB-A cable
- Cisco Navigator Ethernet/POE cable (Cisco provided)
- 12345678 gGoBbO brBR
- Pin 1
- 12345678 oO gBbGbrBR
- RCC-M005-0.3M USB-A to USB-C cable (purchased separately)
- RCC-C018-1.0M TRRS to TRRS cables
Please note that some cables, such as RCC-M006-1.0M and RCC-M005-0.3M, need to
be purchased separately.
The RemoteTableKitTM RTK-PLUSTM is specifically designed for use with Cisco
Webex Codec EQ, ensuring compatibility and seamless integration.
Product Usage Instructions
- Connect one end of the HDMI USB-A cable to the HDMI port on the Cisco Webex Codec EQ.
- Connect the other end of the HDMI USB-A cable to the corresponding HDMI port on your display device.
- Insert the Cisco Navigator Ethernet/POE cable into the Ethernet/POE port on the Cisco Webex Codec EQ. This cable is provided by Cisco.
- If you have purchased the RCC-M006-1.0M USB-B Micro to USB-A cable, connect one end of it to the USB-B Micro port on the Cisco Webex Codec EQ.
- Connect the other end of the RCC-M006-1.0M USB-B Micro to USB-A cable to a USB-A port on your computer or other compatible device.
- If you have purchased the RCC-M005-0.3M USB-A to USB-C cable, connect one end of it to a USB-A port on your computer or other compatible device.
- Connect the other end of the RCC-M005-0.3M USB-A to USB-C cable to the USB-C port on the Cisco Webex Codec EQ.
- For audio connectivity, use the RCC-C018-1.0M TRRS to TRRS cables. Connect one end of each cable to the TRRS ports on the Cisco Webex Codec EQ.
- Connect the other ends of the RCC-C018-1.0M TRRS to TRRS cables to the corresponding audio input/output devices.
- Ensure all connections are secure and properly inserted.
- Refer to the Cisco Webex Codec EQ user manual for further instructions on configuring and using the device.
RemoteTableKit™ RTK-PLUS™ for Cisco Webex Codec EQ Application Guide
RTK-Transmitter™ Table Module
**Cisco Webex Codec EQ SCTLink™ Cable***
Ethernet/POE ; Cisco Mic TRRS; HDMI; Audio 1/0 & USB up to 100m
CAT5e/CAT6
The SCTLink™ cable must always be a single, point-to-point CAT cable with no
couplers or interconnections.
SCTLink™ Cable Specs
Integrator-Supplied CAT5e/CAT6 STP/UTP Cable EIA568A or EIA568B (l0m-l00m
min/max Length)
Module Dimensions
- RTK-TX™: H: 1.39″ (35mm) x W: 10.22″ (259mm) x D: 4.51″ (114mm)
- RTK-RX™ : H: 1.39″ (35mm) x W: 10.22″ (259mm) x D: 4.51″ (114mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>