Meduza Tech PDP104 Land Stand 2-in-1 Wireless Charger Instruction Manual

Meduza Tech PDP104 Land Stand 2-in-1 Wireless Charger

Product Information

• Product: Meduza Tech Land Stand 2-in-1 Wireless Charger
• Model: PDP104
• Designed in: Florida

The Meduza Tech Land Stand 2-in-1 Wireless Charger is a versatile charging device that allows you to wirelessly charge your phone and AirPods simultaneously. It features a sleek design and is designed to provide optimum charging performance.

Product Usage Instructions

1. Plug the Type-C end of the included cable into the adapter port.
2. Place your phone on the charging area of the wireless charger. Ensure that your phone has magnetic charging capability, usually located in the middle of the phone.
3. Once your phone is charged, you can remove it from the charger or keep it on the stand for convenience.

LED Indicator

The LED indicator on the wireless charger provides information about the charging status:

Notes

• It is recommended to use a wall charger of 18W and above. Please note that the wall charger is not included with the product.
• Disconnect the charger from the power outlet when not in use.
• Use only the provided charging cable to connect the charger to the power supply. Uncertified or incompatible power adapters and data cables may cause hazards.
• Avoid using the charger in high-temperature, high-humidity, and strong magnetic field environments.
• Keep the charger at least 20cm away from people with pacemakers, defibrillators, or other implants.
• Wipe the charger and accessories with a dry and clean cloth for maintenance.
• Do not attempt to disassemble or repair the charger byyourself. Improper disassembly may cause electric shock or other safety hazards. Contact after-sales service for assistance if needed.

Preface

Thank you for your purchase. For optimum operation, please read this manual carefully before use.

Packing List

• Wireless Charger *1
• Type-C to Type-C cable *1
• User Manual *1
• Business Card *1

User instruction

1. Plug in the Type-C port into the adapter port and put your phone on the charging area. Make sure the phone has the magnetic charging capability. (Normally the charging area is in the middle of the phone)
2. Remove your phone once charged or keep it on the stand.

LED Indicator

Notes

• It is recommended to use with a wall charger of 18W and above (Wall charger is not included).
• Disconnect the charger from the power outlet when not in use.
• Please use the provided charging cable to connect the charger to the power supply. Uncertified or incompatible power adapters and data cables may cause fire, explosion, or other hazards.
• Do not use this charger in an environment of high temperature, humidity, and strong magnetic field.
• Keep the charger away from people with pacemakers, defibrillators, or other implants at least 20cm away.
• Wipe this charger and accessories with a dry and clean cloth.
• Do not disassemble and repair this charger by yourself. Improper disassembly may cause electric shock or other safety hazards. If necessary, please contact after-sales service.

Specifications

FCC STATEMENT

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause undesired operation.

Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. lf this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC RF Exposure Statement

The equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance between 20cm the radiator your body.

Designed in Florida

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>