SCT RTK-MINI-TX Receiver Module User Guide
- June 13, 2024
- SCT
Table of Contents
SCT RTK-MINI-TX Receiver Module
Product Information:
- Product Name: RemoteTableKit-MiniTM (RTK-MINI-USBTM)
- Updated: 07/17/2023
- Model Number: RCC-M005-0.3M
- Compatible with USB-A (RTK-MINI-RXTM) and USB-C
- Can be used on both transmitter (Tx) and receiver (Rx)
- Power Supply: WPS-12 30VDC, 100-240V 47-63Hz
- Receiver Module: RTK-MINI-RXTM
- Rally Bar included
- Video Cable: RCC-C001-0.3M HDMI to HDMI
- SCTLinkTM Cable included
- Ethernet/POE, HDMI, and USB connectivity
- The SCTLinkTM cable must always be a single, point-to-point CAT cable with no couplers or interconnections
- Transmitter Module: RTK-MINI-TXTM
- USB Micro B (RTK-MINI-TXTM) to USB-A cable (RCC-M006-2.0M) included
- Module Dimensions:
- RTK-MINI-TXTM: H: 1.394(35mm) x W: 7.283(185mm) x D: 4.484(114mm)
- RTK-MINI-RXTM: H: 1.394(35mm) x W: 7.283(185mm) x D: 4.484(114mm)
- Laptop compatible
- Additional Video Cable: RCC-H001-2.0M HDMI to HDMI
- SCTLinkTM Cable Specs:
- Integrator-Supplied CAT6 STP/UTP Cable
- T568A or T568B wiring standards (10m-100m min/max Length)
- RJ45 Pinout:
- T568A: g G o B b O br BR
- T568B: o O g B b G br BR
Product Usage Instructions
- Connect the RCC-M005-0.3M USB-A (RTK-MINI-RXTM) to USB-C cable to the RemoteTableKit-MiniTM (RTK-MINI-USBTM) transmitter or receiver.
- Ensure the power supply (WPS-12 30VDC, 100-240V 47-63Hz) is connected and providing power to the device.
- Place the RTK-MINI-RXTM receiver module and Rally Bar in the desired location.
- Connect the RCC-C001-0.3M HDMI to HDMI video cable to transmit video signals.
- Use the provided SCTLinkTM cable for Ethernet/POE, HDMI, and USB connectivity. Ensure it is a single, point-to-point CAT cable without any couplers or interconnections.
- Connect the RTK-MINI-TXTM transmitter module to the laptop using the RCC-M006-2.0M USB Micro B (RTK-MINI-TXTM) to USB-A cable.
- Use the RCC-H001-2.0M HDMI to HDMI video cable for additional video connections.
- For the SCTLinkTM cable, use an integrator-supplied CAT6 STP/UTP cable and follow the T568A or T568B wiring standards. The cable length should be between 10m and 100m.
- Refer to the RJ45 Pinout section for proper wiring configurations.
RemoteTableKit-Mini™ RTK-MINI-USB™ Application Guide
INSTRUCTION
Module Dimensions
RTK-MINI-TX™: H: 1.394” (35mm) x W: 7.283” (185mm) x D: 4.484” (114mm)
RTK-MINI-RX™: H: 1.394” (35mm) x W: 7.283” (185mm) x D: 4.484” (114mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>