SCT RTK-MINI-USB Receiver Module User Guide
- June 13, 2024
- SCT
Table of Contents
SCT RTK-MINI-USB Receiver Module
Product Information
The RemoteTableKit-MiniTM (RTK-MINI-USBTM) is a versatile kit designed for remote control applications. It includes the following components:
- Neat Bar
- RCC-M005-0.3M USB-A (RTK-MINI-RXTM) to USB-C cable
- WPS-12 30VDC 100-240V 47-63Hz Power Supply
- RTK-MINI-RXTM Receiver Module
- RCC-H016-1.0M RJ45 to RJ45 UTP Control Cable
- RCC-C001-0.3M HDMI to HDMI Video Cable
- RCC-C002-0.3M RJ45 to RJ45 UTP Control Cable
- SCTLinkTM Cable (Ethernet/POE, HDMI, USB)
- Neat Pad Ethernet/POE (provided by Neat)
- RTK-MINI-TXTM Transmitter Module
- RCC-M006-2.0M USB Micro B (RTK-MINI-TXTM) to USB-A cable
The dimensions of the modules are as follows:
- RTK-MINI-TXTM: H: 1.394(35mm) x W: 7.283(185mm) x D: 4.484(114mm)
- RTK-MINI-RXTM: H: 1.394(35mm) x W: 7.283(185mm) x D: 4.484(114mm)
The SCTLinkTM cable must always be a single, point-to-point CAT cable without any couplers or interconnections. The Integrator-Supplied CAT6 STP/UTP Cable with T568A or T568B pinout is recommended for use with the kit.
Product Usage Instructions
To use the RemoteTableKit-MiniTM, follow these steps:
- Connect the Neat Bar to the RTK-MINI-RXTM Receiver Module using the RCC-M005-0.3M USB-A to USB-C cable.
- Connect the WPS-12 30VDC 100-240V 47-63Hz Power Supply to the Neat Bar.
- Connect the RTK-MINI-RXTM Receiver Module to the control system using the RCC-H016-1.0M RJ45 to RJ45 UTP Control Cable.
- Connect the RTK-MINI-RXTM Receiver Module to the display device using the RCC-C001-0.3M HDMI to HDMI Video Cable.
- Connect the RTK-MINI-RXTM Receiver Module to the control system using the RCC-C002-0.3M RJ45 to RJ45 UTP Control Cable.
- Use the provided Neat Pad Ethernet/POE to connect the Neat Bar to the Ethernet/POE network.
- Connect the RTK-MINI-TXTM Transmitter Module to the control system using the RCC-M006-2.0M USB Micro B to USB-A cable.
- For longer distances, use Integrator-Supplied CAT6 STP/UTP Cable with T568A or T568B pinout to connect the RTK-MINI-RXTM Receiver Module and the RTK-MINI-TXTM Transmitter Module.
RemoteTableKit-Mini™ RTK-MINI-USB™ Application Guid
INSTRUCTION
Module Dimensions
- RTK-MINI-TX™: H: 1.394” (35mm) x W: 7.283” (185mm) x D: 4.484” (114mm)
- RTK-MINI-RX™: H: 1.394” (35mm) x W: 7.283” (185mm) x D: 4.484” (114mm)
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>