wellermoz WMOS-S9 Wireless Speaker User Guide

wellermoz WMOS-S9 Wireless Speaker User Guide

Safety Instructions

• Read all instructions and save them for future reference.
• Do not place it near heat sources. Avoid radiators, stoves, and other appliances that generate heat. Avoid prolonged exposure to sunlight and high temperatures.
• This speaker has 2 modes: Bluetooth mode and TF card mode.
• Please note: When the bluetooth is disconnected for 10 minutes, the speaker will go to sleep and shut down. To restart the speaker, press the power switch/mode button.

Package Contents

• Speaker host

• 0.6m charging cable

• Manual

Product Parameters

• Working time: 7hr
• Standby time: ≥300hr
• Bluetooth range: ≤10m
• Frequency response: 20Hz-20KHz
• Bluetooth version: V5.1
• Charging time: 5hr
• Working voltage: DC 5V 1A
• Rated power: 5W
• Waterproof grade: IP67
• Battery capacity: 1800mAh
• Product size: 1136843mm
• Product Weight: 192g(with battery)

Product Description

1. Power switch/mode: press and hold for 2 seconds to turn on in off state; long press for 3 seconds to turn off in power-on state; short press the button to switch modes in power-on state.
2. Volume down/Previous song: Long press the volume down button. Short press the button to play the previous song (valid in Bluetooth mode and TF card mode)
3. Play pause/pairing: When the speaker is in Bluetooth connection state, or in TF card mode, short press the button to play/pause; when the speaker is in Bluetooth mode, press and hold the button for 2 seconds to forcibly disconnect the current connection, and double-click to enter the speaker TWS pairing mode.
4. Volume up/Next track: Long press the volume up button. Short press the button to play the next song (valid in Bluetooth mode and TF card mode).
5. Power/charging indicator (blue/red)
6. Power interface: DC 5V 1A
7. SD card interface
8. Microphone

Operation Instruction

• Step 1
  Press and hold the power button ”  ” for 2 seconds, there will be a boot sound, after booting, the power indicator (blue light) flashes quickly, the RGB is switched between purple and white, and the speaker enters the Bluetooth search pairing state with the mobile phone; the default volume is 20%.

Notice:
When the speaker is inserted into the SD card, it will enter the Bluetooth mode first when it is turned on. At this time, short the power button ” ” to switch to the SD mode, and the speaker can play the songs of the SD card.

Step 2

Turn on the Bluetooth function on your phone or other Bluetooth device and search for the speaker named MZ-507. Connect to speakers.

1. Search for WMOS-S9 speakers on your phone;
2. Connect WMOS-S9 speakers;
3. Choose to play music through WMOS-S9 speakers.

Step 3

After the pairing is successful, there will be a prompt tone, the blue indicator will be always on, and the RGB will switch between purple and white breathing.

Step 4

Play music on your phone. When playing music, the blue indicator light will flash slowly, and the RGB will switch between purple and white.

Step 5

How to connect the speakers to the new device:
When connecting the speaker to the device, long press the pairing button ” ” for 2 seconds to cut off the current connection and enter the pairing state. Then, the blue indicator light will flash quickly, the RGB will switch between purple and white, and the speaker can be connected to the new device. The Bluetooth status will automatically reconnect to the last connected device when it is turned on, and it will shut down if it is not connected for 10 minutes.

Bluetooth Speaker Connection Memory Function

• If the device’s Bluetooth function is turned on, after turning on the speaker, the speaker will automatically connect to the last paired device.

Bluetooth Speaker Call Function

• Answer the call: When the speaker is connected to the mobile phone, if there is an incoming call, you can short press the play pause button ” ” to answer.
• Hang up the call: When the speaker is connected to the mobile phone, you can short press the play pause button ” ” to hang up during the call.
• Reject the call: When the speaker is connected to the mobile phone, you can long press the play pause button ” ” to reject the call.

Charging Tips

• When the battery is low, the speaker will sound an alarm, and you need to charge the speaker.
• When charging, the red indicator light is always on, and the red indicator light is off when fully charged.
• It is recommended to charge the product with lithium battery once every three months if not in use.

TWS

TWS connection method:
Turn on the two speakers, double press the button ” ” of any one speaker to enter the TWS interconnected state and send out a “dong” to form a TWS team. The light is always on for slave mode, and then connect one speaker to the Bluetooth device to play music. The next time you turn on the speaker, it will automatically connect.

Tf Card Mode

• After inserting the TF card, the speaker will enter the TF card mode, you can short press the power button ” ” to switch the mode.
• In TF card mode, when playing music, the blue indicator light will flash slowly, and the RGB will switch between purple and white.

Warranty card

Warranty records

CERTIFICATE
DATE:___
QC:___

Thank you for purchasing this product. Please read all safety information and operating instructions before using the Bluetooth speaker.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>