BLACK ICE 24L Dual Energy Hot Cold Cooler User Guide

BLACK ICE 24L Dual Energy Hot Cold Cooler

Product Information

Warnings

The product comes with the following warnings:

1. Make sure to read and follow all instructions before using the product.
2. Keep the product out of reach of children.

Use and Operation

The product can be used in two modes: cooler function and heat function.

Cooler Function

1. Load the cooler with already cold food/drinks if possible to minimize energy consumption.
2. Select the cold mode.
3. Choose the connection mode (220V or 12V).
4. Select MAX mode for faster cooling or ECO mode to lower the temperature slowly or maintain it.
5. The LED on the product will be displayed in GREEN.

Heat Function

1. Load the cooler with hot food if possible to minimize energy consumption.
2. Choose the warm mode.
3. Choose the connection mode (220V or 12V).
4. Select MAX or ECO mode depending on the desired intensity.
5. The LED on the product will be displayed in RED.

Specificities for Use in a Car

1. Unplug the unit when the vehicle engine is not running to prevent battery discharge.
2. Start the vehicle with the cooler unplugged and only connect it when the engine is running.
3. When using the cooler with the 12V DC power supply, the plug may become hot during use.
4. Ensure sufficient space and airflow around the cooler during operation (ventilation or A/C).

Technical Specifications

The technical specifications of the product are not provided in the given text.

Cleaning and Storage

1. Clean the surfaces of the cooler with a cloth and a mild detergent solution.
2. Do not clean the cooler under running water or by immersion in water.
3. Avoid using abrasive or aggressive cleaning agents.
4. Store the cooler in a dry place, out of reach of children, when not in use.

Repair

If the product is not working properly, unplug it and check the following points:

• Ensure proper power supply.
• Check for any visible faults or damages.

In case of a proven fault, only a professional should be contacted for repair.

The BLACK ICE electric coolers can be used wherever you need a snack or a cold drink: camping, boating, parties, barbecues, hiking, etc. +/- 16°C is the temperature difference your cooler can reach compared with outside temperature. Working by temperature exchange, it allows the option to heat and keep warm food.
50° is reached in 30 minutes. You can use it all year round!
Very practical, it can be connected to 220V AC for domestic use, or to the 12V DC cigarette lighter socket in a car or on a boat.

WARNINGS

• Before use, check that the cables, plugs and casings are not damaged. DO NOT use if damaged or worn parts.
• NEVER fill the unit with water or ice.
• DO NOT immerse the unit in water.
• DO NOT put ice packs inside.
• DO NOT use under the rain.
• DO NOT handle if your hands are wet.
• Use in a dry and ventilated area.
• DO NOT obstruct the air flow to the unit. Ventilation slots must be kept clear to allow the unit to operate properly and to avoid dangerous overheating.
• DO NOT place the appliance in direct sunlight or in an enclosed area where ventilation is restricted or where there are other sources of heat.
• As with all electrical equipment, keep away from children and pets.
• Use only with a 12V DC (negative ground) or 220V AC power supply.
• Unwind the required power cable completely before use. DO NOT use this cable while it is coiled, as this may cause the cable to overheat.
• This item is not intended for the storage of medicines, chemicals, or anything that is not food or drink.
• This cooler is intended for temporary use. It is not a refrigerator designed for permanent installation or for professional use.
• When plugged in or after connection, keep the lid closed as much as possible.
• DO NOT pull out the plugs by pulling on the cables.

USE AND OPERATION

Cooler function:

• Load your cooler with already cold food/drinks if possible, to avoid high consumption and the cooler ha-ving to run at full capacity.
• Select the cold mode.
• Choose the 220V or 12V connection mode.
• Select MAX mode to cool faster, or ECO mode to lower the temperature more slowly or maintain it.
• The LED on the product is displayed in GREEN.

Heat function:

• Load your cooler, if possible, with food that is already hot to avoid high consumption and the engine ha-ving to run at full speed.
• Choose the warm mode.
• Choose 220V or 12V mode.
• Select MAX or ECO mode depending on the desired intensity.
• The LED on the product is displayed in RED.

Specificities for use in a car:

• Unplug the unit when the vehicle engine is not running to prevent the vehicle battery from discharging.
• Start the vehicle with the cooler unplugged! Only connect the cooler when the engine is running.
• When using the cooler with the 12V DC power supply, the plug becomes hot during use.
• Leave space around the cooler during operation and sufficient air flow (ventilation or A/C).

TECHNICAL SPECIFICATION

CLEANING AND STORAGE

1. The surfaces of the cooler can be cleaned with a cloth and a mild detergent solution.
2. The cooler should not be cleaned under running water or by immersion in water. Abrasive or aggressive cleaning agents should also be avoided.
3. When not in use, the cooler should be stored in a dry place, out of reach of children.

REPAIR

If the appliance does not seem to be working properly, unplug it and check the following points: In the event of a proven fault, only a professional can intervene.

Regularly remove dust from the product and the plugs. Dust accumulation can cause fires.

RECYCLAGE

This appliance must be considered as a household appliance. At the end of its life, it cannot be mixed with household waste. It is necessary to bring the product to a container park, a sorting centre, a waste collec-tion centre, in the household or electrical appliance waste bin.

imported by PROAKCESS SRL
5, rue de !’innovation BE-7503 Froyennes info@proakcess.com www.proakcess.com

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>