BLACK ICE SNO-LIFT-WINCH Snowmobile Lift with Winch Instruction Manual
- October 29, 2023
- BLACK ICE
Table of Contents
Aluminum Snowmobile
Lift with Winch
Instructions for Part #SNO-LIFT-WINCH
**** GENERAL GUIDELINES & SAFETY
- It is the user’s responsibility to read and follow all instructions
- Keep these instructions with the product at all times and review before each use
- It is the responsibility of this product’s owner to furnish the instructions to any person that borrows or purchases the product
- Inspect the product before use to ensure it is assembled properly and all parts are in safe working order and free of defects
- Never modify this product in any way
- All circumstances cannot be addressed in these instructions
- Please use common sense and practice general safety measures when using this product
- Parts and/or instructions are subject to change without notice
- Do not run the snowmobile motor while in place
- For use with unoccupied snowmobiles only
- Do not exceed capacity of 700lbs
PARTS
| Part | Description | Quantity |
|---|---|---|
| A | BASE | 1 |
| B | SUPPORT BRACKET 1 | 1 |
| C | SUPPORT BRACKET 2 | 1 |
| D | LOWER VERTICAL TUBE | 1 |
| E | UPPER VERTICAL TUBE | 1 |
| F | WINCH WITH HANDLE | 1 |
| G | LIFT LOOP | 1 |
| H | CLEVIS PIN | 1 |
| I | MX10 X 20MM BOLT, NUT, AND WASHER | 3 |
| J | M8 X 60MM BOLT, NUT AND WASHER | 6 |
Tools Required (Not Included)
13mm, 14mm, 17mm, and 19mm wrenches or sockets.
Step 1. Set Support Bracket 1 (Part B) in place on Base (Part A).
Step 2. Set Support Bracket 2 (Part C) in place on Base (Part A). Fasten Parts A, B, and C together with 4 M8 x 60mm Bolts, Nuts, and Washers (Part J).
Step 3. Align the Lower Vertical Tube (Part D) holes with the holes in the Support Brackets (Parts B and C) and fasten with the remaining 2 of the M8 X 60mm Bolts, Nuts, and Washers (Part J).
Step 4. Slide the Upper Vertical Tube (Part E) over the Lower Vertical Tube (Part D) and secure with the Clevis Pin (Part H).
Step 5. Attach the Winch (Part F) to the top platform of the Upper Vertical Tube (Part E) using the 3 M10 X 20mm Bolts, Nuts, andWashers (Part I).
Step 6. Attach the handle to the Winch (Part F). Use the Lift Loop (Part
G) to lift your sled to prevent surface scratches.
PRODUCT WARRANTY & LIABILITY
GENERAL PRODUCT WARRANTY: Products purchased from the Authorized Dealer
(original place of purchase) or Merchant (“Dealer”) will be free of defects in
material and workmanship at the time of receipt, and will meet the
specifications stated at the place of purchase transaction or online at the
Dealer’s website, under normal use and service when correctly installed,
operated and maintained. This product warranty is effective for the period of
time stated below, unless otherwise stated in the product instructions or
depicted in the product advertisement. All Authorized Dealer warranties are
NON-TRANSFERABLE and cover only the original end purchaser. This limited
warranty does not cover products purchased through non-authorized dealers.
Non-authorized dealer receipts are not accepted for warranty verification.
WARRANTY CLAIMS MUST BE MADE DIRECTLY TO THE ORIGINAL PLACE OF
PURCHASE.
WARRANTY PERIOD : This warranty remains in force for one year from the
date of the product’s accepted delivery. The Authorized Dealer offers a one
year manufacturer’s warranty for most products unless otherwise specified on
the product advertisement.
WARRANTY SERVICE : The Authorized Dealer will replace any defective or
malfunctioning part at no charge, including payment of the shipping costs of
parts or replacement product to and from the manufacturer. The purchaser is
responsible for labor charges. If the product does not meet specifications as
depicted in the advertisement, the Authorized Dealer will refund the full
purchase price of the product.
Questions regarding the warranty on a specific product and warranty claims
should be directed to the Authorized Dealer with whom the purchase transaction
was made.
WARRANTY LIMITATIONS : The above warranty does not apply to products that
are repaired, modified or altered by any party other than the Authorized
Dealer; are subjected to unusual physical stress or conditions (such as
overloaded ramps or corrosion), natural disaster, governmental actions, wars,
strikes, labor disputes, riots, theft, vandalism, terrorism or any reason
beyond reasonable control; are damaged due to improper installation, misuse,
abuse, accident or negligence in use, storage, transportation or handling, or
tampering; or to products that are considered consumable items or items
requiring repair or replacement due to normal wear and tear. Product should be
inspected prior to signing for delivery. Product damage incurred during
shipping, unless noted on the Bill of Lading at the time of delivery, renders
this warranty void.
LIMITED LIABILITY : In no event shall THE AUTHORIZED DEALER be liable to
the purchaser or any third party for any indirect, incidental, consequential,
special, exemplary or punitive damages arising out of the use of the product,
including, without limitation, property damage, loss of value of the product
or any third party products that are used in or with the product, or loss of
use of the product or any third party products that are used in or with the
product.
100422
1-888-651-3431
Documents / Resources
|
BLACK ICE SNO-LIFT-WINCH Snowmobile Lift with
Winch
[pdf] Instruction Manual
SNO-LIFT-WINCH Snowmobile Lift with Winch, SNO-LIFT-WINCH, Snowmobile Lift
with Winch, Winch
---|---