GDANSK FPB1A3030S13W-CCT LED Panels Instruction Manual

Instructions Manual

FPB1A3030S13W-CCT LED Panels

Model: FPB1A3030S13W-CCT/FPB1A3060S23W-CCT/FPB1A6060S42W-CCT
FPB1A30120S42W-CCT/FPB1A3012042BK-CCT
EAN CODE : 3276007485196/3276007485202/3276007485219/3276007485226/3276007485233
Year of guarantee
repairable

WARNING SYMBOLS

| Conformity with all relevant EC Directive requirements.
---|---
| Class II product – Double Insulated – No earth required.
|  IP20 IP NUMBER: I P20

**** GENERAL SAFETY INSTRUCTIONS

Read this instruction manual thoroughly before using the appliance and save it for future reference and if necessary pass the instruction manual on to a third party.
WARNING: When using electrical appliance, basic safety precautions should always be followed to reduce the risk of fire, electrical shock and personal injury.

1. General
   Any visitor, especially children, shall be kept away from the work area. Check if the electrical specifications of this luminaire are compatible with your installation.
   WARNING: The power supply must be deactivated prior to assembly, maintenance, exchanging the bulb or cleaning processes. Remove the fuse or switch the fuse to OFF and secure from reactivation. Care must be taken before drilling fixing holes to avoid any existing wiring or pipework that may be concealed.

2. Electrical safety
   Luminaire should be installed by authorized electrician only acc. to national wiring rules. The light source of this luminaire is not replaceable; when the light source reaches its end of life the whole luminaire shall be replaced.
   Replaceable control gear by an end-user.

SPECIFIC SAFETY RULES

The luminaire shall, under no circumstances, be covered with insulating matting or similar material.

ENVIRONMENTAL PROTECTION

CAUTION!
**** Electrical products must not be thrown out with domestic waste. They must be taken to a communal collecting point for environmentally friendly disposal in accordance with local regulations. Contact your local authorities or stockiest for advice on recycling. The packaging material is recyclable. Dispose of the packaging in an environmentally friendly manner and make it available for the recyclable material collection-service.

APPLIANCE SPECIFICATIONS

TECHNICAL CHARACTERISTICS

Supplier ref| FPB1A3030S13W-ECT| FPB1A3060S23W-CCT| FPB1A6060S42W-CCT| FPB1A30120S42W-CCT| FPB1A3012042BK-CCT
Rated voltage| input:220-240V—output:30-42VDC| input:220-240V— output:30-42VDC| input:220-240V— output:30-42VDC| input:220-240V — output:30-42VDC| input:220-240V — output:30-42VDC
Rated current of lamp| 320mA| 550mA| 1020mA| 1020mA| 1020mA
Power factor| >0.7| >0.85| >0.9| >0.9| >0.9
Rated frequency| 50/60Hz| 50/60Hz| 50/60Hz| 50/60Hz| 50/60Hz
Rated wattage| 13W| 23W| 42W| 42W| 42W
Ambient Temperature| 40°C| 40°C| 40°C| 40°C| 40°C
IP number| 20| 20| 20| 20| 20
Protection class| II| II| II| II| II
Operating frequency| 2407 MHZ| 2407 MHZ| 2407 MHZ| 2407 MHZ| 2407 MHZ
Maximum transmit power| -7.709dBm| -7.581dBm| -8.575dBm| -8.575dBm| -8.575dBm

INSTALLATION / ASSEMBLY / PARTS IDENTIFICATION / DRAWINGS

Waring: the installation shall be carried out by an electrician or electrically skilled person such that the basic insulated fixed wiring have to be prepared with supplementary insulation before the luminaire can be connected.
Use the supply cord (IEC 60245 or IEC 60227), 2×0.75mm?-2×1.5mm?.

MAINTENANCE / CLEANING

Always use bulbs according to specifications listed in this manual.
Disconnect from mains before maintenance or cleaning. Repairs should only be carried out by qualified persons and using genuine spare parts. Inappropriate repairing could cause significant danger.
WARNING: The use of any accessory not specified in this manual may present a risk of personal injury.
if the external flexible cable or cord of this luminaire is damaged, it shall be exclusively replaced by the manufacturer or his service agent or a similar qualified person in order to avoid a hazard.

OTHERS (SERVICE, REPAIRING, GUARANTEE, ETC…)

• Have your product repaired by a qualified person.
  This electric product is in accordance with the relevant safety requirements. Repairs should only be carried out by qualified persons using original spare parts, otherwise this may result in considerable danger to the user.

•  Please contact the store which you bought the product for after sale services if any.

For indoor use only.
This product contains a light source of energy class D to (EU) 2019/2015.

1. WARRANTY DURATION:
   The general legal warranty applies in accordance with the statutory provisions in force in your country from the delivery of the goods and upon providing the receipt as the proof of the purchase.
   However, INSPIRE goes beyond that. We want you to have the best experience possible with our products, thus we have extended the warranty periods for all INSPIRE products to 7 years.

2. WARRANTY APPLICATION:
   For the warranty to be applied, the product must have been installed, used and maintained according to the Instruction Manual guidelines.

3. QUESTIONS AND CLAIMS:
   If you have any questions or encounter any problems regarding the use of the product, its performance or visual aspect, you are welcome to contact your vendor through the contact information you will find on the purchasing receipt.

|
---|---
|
|
|
|
|

1. Turn off the light by switch.
2. Press “A”,”B” or “C’ key you want to grouping for a while and you will see the indicator on the remote flashing, hold the “A”,”B” or “C” key and turn on the light by switch at the same time
3. You will see the light flashing after step 2,please hold the “A”,”B” or “C” key until the light stop flashing, then the light is grouped. If you do not grouping successfully, please try step 1-3 again
4. If Led panel haven’t the right color, please use this button and press unless 2 panels will have the same color. i1/4Ki.}.

Press “A”/”B”/”C” key to chose and control the specific group you need.

If you want to turn on/turn off specific group while there are more than one group in the same space, You can press relevant key “A”/”B”/”C”.
If you want to turn on/turn off the different groups at the same time, please use the key

1. Adjust the brightness and temperature colour of the light you need, then press the “ ” for a while, you will see the light flashing, then release the button, the preset finished.
2. You can press the “ ” to chose the preset ‘rightness and temperature color when the light is at any other brightness and temperature.

This product is recyclable. If it cannot be used anymore, please take it to waste recycling centre.

Original Instructions

Made in China

EU/EC Declaration of conformity
Product Modell
811850
Name and address of the manufacturer or his authorised representative
ADEO Services,
This declaration of conformity is issued under the sole responsibility of the manufacturer
Object of the declaration

Product Type| KIT1 LED PANEL 1800LM CCTDIM 30X30 ALU IP20 RC WH INSPIRE GDANSK 811850 – EAN Code: 3276007485196
---|---
Product| Industrial Type Design Reference: FPB1A3030S13W-CCT
Product| INSPIRE
Serial number coding or batch number| SSSSSSDDMMYY(SSSSSS; Supplier code; DDMMYY:ETD date)

The object of the declaration described above is in conformity with the relevant Union harmonization legislation
References to the relevant Harmonised standards used or references to the specifications in relation to which conformity is declared
When applicable, the name and number of notified body number

2014 _53_EU_RED
radio equipment| EN IEC 60598-2-1:2021
EN IEC 60598-1:2021+A11:2022
EN 62493:2015
EN IEC 55015:2019+A11:2020
EN 61547:2009
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 300 440 V2.1.1
EN 62479:2010
---|---
2011_65_EU_RoHS
Restriction of hazardous substances in electrical products| Directive 2011/65/EU
Amended by (EU) 2015/863
IEC 62321-1:2013
IEC 62321-2:2021
IEC 62321-3-1:2013
IEC 62321-4:2013+A1:2017
IEC 62321-5:2013
IEC 62321-6:2015
IEC 62321-7-1:2015
IEC 62321-7-2:2017
ISO 17075-1:2017
IEC 62321-8:2017
EN IEC 63000:2018
2009_125
ECO DESIGN EcoDesign| (EU) No 2019/2020
(EU) No 2021/341
(EU) 2019/2015
(EU) 2021/340
Compiled, signed by and on behalf of| Eric LEMOINE International Project Quality Leader
Place and date of issue| Ronchi France
07/12/2022

Product Modell
812236
Name and address of the manufacturer or his authorised representative
ADEO Services,
This declaration of conformity is issued under the sole responsibility of the manufacturer
Object of the declaration

Product Type| KIT1 LED PANEL 1800LM CCTDIM 30X30 ALU IP20 RC WH INSPIRE GDANSK 812236 – EAN Code: 3276007485202
---|---
Product| Industrial Type Design Reference: FPB1A3060S23W-CCT
Product| INSPIRE
Serial number coding or batch number| SSSSSSDDMMYY(SSSSSS; Supplier code; DDMMYY:ETD date)

The object of the declaration described above is in conformity with the relevant Union harmonization legislation
References to the relevant Harmonised standards used or references to the specifications in relation to which conformity is declared
When applicable, the name and number of notified body number

2014 _53_EU_RED
radio equipment| EN IEC 60598-2-1:2021
EN IEC 60598-1:2021+A11:2022
EN 62493:2015
EN IEC 55015:2019+A11:2020
EN 61547:2009
EN IEC 61000-3-2:2019+A1:2021
EN 61000-3-3:2013+A1:2019+A2:2021
EN 301 489-1 V2.2.3
EN 301 489-3 V2.1.1
EN 300 440 V2.1.1
EN 62479:2010
---|---
2011_65_EU_RoHS
Restriction of hazardous substances in electrical products| Directive 2011/65/EU
Amended by (EU) 2015/863
IEC 62321-1:2013
IEC 62321-2:2021
IEC 62321-3-1:2013
IEC 62321-4:2013+A1:2017
IEC 62321-5:2013
IEC 62321-6:2015
IEC 62321-7-1:2015
IEC 62321-7-2:2017
ISO 17075-1:2017
IEC 62321-8:2017
EN IEC 63000:2018
2009_125
ECO DESIGN EcoDesign| (EU) No 2019/2020
(EU) No 2021/341
(EU) 2019/2015
(EU) 2021/340
Compiled, signed by and on behalf of| Eric LEMOINE International Project Quality Leader
Place and date of issue| Ronchi France
07/12/2022

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>