MONGITI 5.8G Wireless Portable DVR User Manual

Wireless Portable DVR
User Manual

5.8G/2.4G/1.2G Wireless Portable DVR

Thank you for purchasing this product. This handbook can lead you to use our product and the applied program of its adding.

NOTES

1. We try our best to make the content correct and complete, but it can’t certify that there is no any mistake and omit of the introduction.

2. Our company is only responsible for maintaining and repairing the problem of itself existing.
   We aren’t responsible for personal data deleted and lost caused by wrong operation, product repair or other case. We are also not responsible for any other indirect loss caused by this.

3. Any modify of software, hardware, introduction of this product will not be notified separately, and our company owns the final explanation rights.

Notes

Dear customers, thank you for choosing our products. We really hope our products can bring happiness to you. Please read the following instructions carefully before using:

• Forbid to use it in high temperature, high humidity environment, especially in the bathroom with high temperature. 0~40℃ is the best working temperature for DVR.

• Avoid putting DVR at the place where the sunshine penetrates directly.

• Please inserting or pulling out the SD card after DVR power off. If under working state, the huge current will bring unpredictable damage to the machine.

• Put it in the place where the children are not able to touch, in case it falling down or against sharp objects, which will bring serious damage to the machine.

• Please don’t dismantle the DVR without authorization. If any query, please contact with the distributor or our company.

• Please don’t change or poke the battery. If put the battery into fire, it will explode and hurt people.

• Please don’t use it as driving or doing the work, which need your high attention.

• We suggest customer to copy the data in case any loss caused by unstable power supply.
  Otherwise our company will not be responsible for any damage.

• When inserting SD card, please make sure the inserting direction is correct. Otherwise it will damage the card slot, which users need to bear it by themselves.

• DO NOT use this product to violate others’ privacy. Monitoring others’ activities without consent is illegal and this product is not designed and manufactured for such purpose;

• DO NOT use this product for any illegal activities. We shall not be responsible for any consequences of illegal acts committed by the user.

Basic Information

Basic Information:

• Display: 5-inch HD screen (800X480pix).
• Wireless Receiving：Built-in 5.8G/2.4G/1.2G wireless receiving module.
• Channel Switch：Supports 40 channels, a key to auto scan to lock channel.
• Antenna: Folding SMA antenna assures excellent wireless receiving.
• Recording: Supports seamless cycle and continuous video from wireless cameras.
• Photo：Supports function of taking pictures .
• AV OUT：[NTSC / PAL].
• Battery：Built-in 4500mAh high capacity Li-battery.
• Speaker: Built-in speaker of 1W.
• Storage: Supports up to 32GB TF card.
• Language: Supports multi-language.
• Supports Power-saving Mode: automatic shutdown, automatic off-screen.
• Automatic upgrade: Supports system upgrade.
• Sunshade Cover Provided: Screen video can be viewed clearly under sunshine.
• Screw-socket: 1/4 inch standard screw socket.

Buttons & Interface

Loading & Unloading of Sunshade Cover

Loading & Unloading Methods of Sunshade Cover
The bottom of sunshade cover is provided with 2 buckle pins. Please aim them at the button holes on DVR and push gently; it’s loaded in place. If need to unload it, just gently push it  to the opposite direction.
Open operation of the sunshade cover: just push up the button in the middle of cover; it pop open.

How to Charge

1. Notice before operation
   Battery capacity symbols:
   Tips: The possible reason for being unable to power on DVR is battery running out. Please operate it after charging by AC adapter or PC.

2. How to charge
   Charge 4~6 hours for fully charged. Unplug the charger until the battery status is full.

Notice:
A. This charger is for this machine use only. Do not leave the charger in humid place. Unplug the charger and keep it well after charging. Do not repair, break down or remake the charger.
B. For better performance, please charge the brand new machine for more than 6 but less than 10 hours for the first time. New battery will reach best performance after a few times full charge and discharge.
C. If no need to use in a long time, it’s recommended to charge the DVR every 2~3 months and then keep it after switch off.

Basic Operation

1. Power On/Off:
   Press “ ” to power on, DVR is on working state; long time press “ ” again to power it off.

2. Working mode switch (switcher located at the left corner):
   When it switches to “ ”, DVR is in state of receiving/record；
   When it switches to “ ”, DVR is in the state of take photo；
   When it switches to “ ”, DVR is in the state of playback.

3. Automatic scanning to lock channel
   The DVR is in “auto” scan mode default. Press “ ”start scan from A1 to D8 one by one, then it locks the strongest signal channels. Please press to choose and lock the channel.

4. External Storage card
   Only after storage card being plugged in, this DVR can record, photo. Screen will show symbol of SD card & its left capacity.

5. Working as a U-disk
   Connect DVR to computer and power it on, it will work as a U-disk. Open the removable disk in the computer, you’ll find the videos and photos in “ RECORD” and “ PHOTO” files under “DICM” directory.

Record & Photo

Power DVR on, and select working mode to “ ”, it is in recording/photo mode.

1. Record: Under “ ” mode, press “ ” , DVR start to record, and screen shows “REC”. Press “ ”again to pause, screen shows “ ”; press “ ” one more time, it continue to record. Press “ ” to end, it will save automatically and exit. If not press “ ”, the system will automatically save video in segments until storage card is full.
   

2. Photo: Under “ ” mode, press “ ” once, screen flashes once, and get one picture.
   While if “Overwrite” is turn on, not press “ ” to end recording, system will automatically save video in segments. And when the card is full, it will overwrite the earliest recording and save the latest one, keep cycle recording.

3. Mute/Sound: Under “ ” mode, it is mute, press “ ” to enter state of sound. Press “ ” again Screen displays “MUTE”. Speaker no sound;
   Note: Mute setting will not affect earphone.
   

Play Video/Photo

When working mode selected to “ ”, it’s in the mode of play video & photo. Press to select “Photo” or “Video”. Press “ ” to exit and back to main menu.

1. Play Video: When select “Playback” -video, press “ ” to enter into video date folder. Press to select date, and press “ ” to enter into time phased video files. Press to select, and press “ ” to play video. Press to adjust volume. Press long time to fast forward; press long time to rewind; press “ ” to pause; press “ ” again to release pause; press “ ” to exit.
   

2. Play Photos ：Select “Photo”, and press “ ” to enter into photo files. Press to select pictures, then press “ ” to view. Press to view next one; press to view previous one. Press “ ” to exit.
   

3. Delete Photo &Video：Under working mode, press to select files. Press “ ” to  get a dialogue. Press to select “All/Current”/“Cancel”.，Press “ ” to confirm.
   

Function Settings

Power DVR on, working mode switched to “ ”, press “ ” to enter into function and system setting menu. Press to select “Function”, then press “ ” to enter into function menu.

1. Channel Setting: Press to select “Channel Setting”, and then press “ ” to enter.
   Press to select “A,B,C,D” then press “ ” to select and exit.
   

2. Recorder Resolution: Press to select “ Recorder Resolution” and press “ ” to enter.
   Press to select “720X576” / “720X480”. Press “ ” to confirm & exit.
   

3. Frame Rate: Press to select “Frame Rate” and press “ ” to enter. Press to select “30 FPS”/“25 FPS”, and press “ ” to confirm & exit.
   

4. Video Segment Sizes: Press to select “ Video Segment Sizes”, then press “ ” to enter. Press to select “10 MIN”/“30MIN”/“60 MIN”. Press “ ” to confirm & exit.
   

5. Overwrite: Press to select “ Overwrite”, and press “ ” to enter. Press to select “Off”/ “On”, and press “ ” to confirm & exit. If “Overwrite” is on, DVR will cycle record, and save the latest video.
   

6. Time Stamp: Press to select “Time Stamp”, and press “ ” to enter. Press to select “Off”/ “On”, and press “ ” to confirm & exit. If it’s on, video will be saved with synchronous time.
   

7. Information Display: Press to select “Information Display”, and press “ ” to enter.
   Press to select “Off”/ “On”, and press “ ” to confirm & exit. If it’s on, screen will display information of working frequency, channel, audio state, date & time, etc. If select “Off”, all the information will not be displayed.
   

8. Video Setting: Press to select “Video Setting”, and press “ ” to enter. Press to select “Brightness” or “Contrast”; then press “ ” to enter; then press to adjust brightness or contrast. Press “ ” to exit
   

System Settings

Power DVR on, working mode switched to “ ”, press “ ” to enter into function & system setting.
Press to select “System”; then press “ ” to enter into system menu.

1. Date time: Press to select “Date Time”, and press “ ” to enter. Press “ ” again to move the cursor, and press to adjust date & time. Press “ ” to exit.
   

2. Language: Press to select “Language”, and press “ ” to enter. Press to choose your language. And press “ ” to confirm and exit.
   

3. AV Out：Press to choose “AV Out”, and press “ ” to enter. Press to choose “PAL/NTSC”，Press “ ” to confirm video displayed on TV screen. Pull out AV cable, video will back to DVR screen.
   

4. Format：Press to select “Format”, and press “ ” to enter. Press to choose “Yes”. Press “ ” to confirm & exit.
   

5. Power Save: Press to select “Power Save”, and press “ ” to enter:
   1）Auto LCD Off：Press to select “ Auto LCD Off”, and press “ ” to enter. Press  to select “ 1 MIN”/ “5 MIN”/ “Off”, and press “ ” to confirm & exit. If turn on “ Auto LCD Off”, LCD screen will automatically shut off when the set time is due. Press any key to recover screen display.
   2）Auto Power Off: Press to select “ Auto Power Off”，and press “ ” to enter.
   Press to select “ 5 MIN” / “10 MIN” / “Off”, and press “ ” to confirm & exit. If turn on “ Auto Power Off ”, DVR will automatically shut off when the set time is due.
   

6. Firmware Update: Press to select “Firmware Update”, and press “ ” to enter.
   Press to select “Yes”, and press “ ” to start update. Please remember to save update file “zburnT_C11.run.elf ” at root directory of SD card.
   

7. Default Setup: Press to select “Default Setup”, and press “ ” to enter. Press to select “Yes” and press “ ” to confirm. Press “ ” to exit.
   

8. Memory Info: Press to select “Memory Info”, and press “ ” to view capacity of SD card. Press “ ” to exit.
   

9. Version: Press to select “Version”, and press “ ” to view version information. Press “ ”to exit.
   

10. Display Mode: Press to choose “Display Mode”. Press to choose “16:9/4:3”. Then press “ ” to confirm. Press “ ” to exit.

Trouble Shooting

Trouble Shooting:

1. It can’t power on: Maybe no power. Recharging the DVR is ok;
2. System halted: Press the RESET key to turn on player again;
3. It can not play: Maybe the format of video file is not supported by this DVR, please convert it into the supported format.
4. The text is in messy code: Make sure the correct language is selected.
5. It can’t upload / download files or can’t find the disk in PC: Replace USB cable/USB port.
6. It can not save file: SD card is not in DVR, please insert SD card; or SD card memory is full, please delete some files to release memory; or there is damaged area in memory, please format it.

Specification

5.820GHz: A6: 5.840GHz: A7: 5.860GHz; A8: SPI
BI: 5.725GHz; B2: 5.745GHz; B3: 5.765GHz; B4: 5.785GHz 35: 5.805GHz; B6: 5.825GHz: B7: 5.845GHz: B8: 5.865GHz CI: 5.733GHz: C2: 5.752GHz: C3: 5.771GHz; C4: 5.790GHz C5: 5.809GHz; C6: 5.828GHz: C7: 5.847GHz; C8: 5.866GHz DI: 5.705GHz: D2: 5.685GHz: D3: 5.665GHz: D4: 5.645GHz D5: 5.885GHz: D6: 5.905GHz: D7: 5.925GHz: D8: 5.945GHz El: 5.658GHz: E2: 5.695GHz: E3: 5.732GHz; E4: 5.769GHz E5: 5.806GHz: E6: 5.843GHz; E7: 5.880Gliz: E8: 5.917GHz
2.4GHz
8 channels| Al: 2414MHz: A2:2432MHz; A3: 2450MHz: A4:2468MHz. A5:2490MHz: A6:2510MHz: A7: 2390MHz; A8:2370MHz
I.2GHz 24chatmels| A1:1080 MHz: A2:1120MHz; A3:1160MHz: A4:1200MHz A5:1240 MHz: A6: 1280MHz; A7:1320MHz: A8:1360MHz B1:1080 MHz: B2:1120MHz; B3:1160MHz; B4:1200MHz 85:1258 MHz; B6: 1280MHz: B7:1320MHz; B8:1360MHz C 1:1080 MHz: C2:1120MHz; C3:1160MHz: C4:1200MHz C5:1010MHz: C6: 1040MHz; C7:1240MHz: C8:1280MHz
Wireless Receiving| Sensitivity| -88Db;-92dB;-103dB
AV IN| TV system| NTSC / PAL
Output voltage| 3.6-4.2 V
AV OUT| TV system| NTSC / PAL
HD 5-inch LCD
screen| Active area| 108mm(W) X 64.8mm(H)
Resolution| 800 X 480 Pixel
Luminance for LCM| 500 cd/M2
Video| Resolution| 720576 / 720480
Video compress| MPEG-AVI30fps
Play format| MPEG-AVI
Audio| Frequency| 20HZ-20KHz stereo
Earphone Output| Left: 20MW+ right 20mW [160](suit to largest volume)
Speaker| 1W
Photo| Format| JPG/JPEG
Storage| External
SD card| TF card 1GB-32GB (optional)
32GB recording time| 10-32 hours
1GB photos| 15625pcs
Operating system| PC| Windows & Mac OS
Port| USB 2.0
Language| Multiple
Power| Voltage| DC 5V
Current (rec eiving mode)| 660MA
Current( re cording mode)| 680MA
Power| Current (recording with off-screen mode)| 340MA
AC adapter| DC 5V 2A
Built-in battery| Li-battery 4500Mah
Standby time| Wireless record| ?9.5 hours(off-screen); >5hours (on- screen)
Wired record| ?..12 hours(off-screen); >6hours ( on-screen ) “LED canicht nut included.
Size: (LX W X H)| Without sunshade| 131mm x 90.5mm x 18mm
Size: (LX W X H)| With sunshade| 131 mm x 90.5mm x 28rnm
Weight:| Without sunshade| 215g
Weight:| With sunshade| 260g

Package Contents

The following items are all in box. Please check:

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>