Hearth Hand AM29S Portable Rechargeable AM or FM Radio User Guide
- June 13, 2024
- Hearth Hand
Table of Contents
Hearth Hand AM29S Portable Rechargeable AM or FM Radio
Product Information
The Portable Rechargeable AM/FM Radio with Bluetooth is a versatile device that combines the functionality of a traditional AM/FM radio with the convenience of Bluetooth connectivity. It features an audio jack for connecting external devices, a charging port with an indicator for recharging the device, and an AM/FM tuning knob for selecting radio stations. The mode switch allows you to easily switch between different modes, including FM, AM, Bluetooth, and AUX. LED indicators provide visual feedback on theselected mode, and a volume knob allows you to adjust the audio output.
Product Usage Instructions
To use the Portable Rechargeable AM/FM Radio with Bluetooth, follow these steps:
Charging
Before using the device for the first time, ensure it is fully charged by connecting it to a power source using the provided charging cable. The charging port and indicator are located on the front of the device.
- Plug micro USB end of charging cable into charging port
- Plug USB end of charging cable into a DC 5V 1A power adaptor
- Full charge requires approximately 4-5 hours
- Red light is always on when charging, and will turn off when the device is fully charged.
Mode Selection
Use the mode switch to select the desired mode: FM, AM, Bluetooth, or AUX. The LED indicators will show which mode is currently selected.
FM Mode
- Turn mode switch knob to get the triangle on the knob pointing to “FM”
- White LED indicator above “FM” will be on
- Rotate FM/AM tuning knob to find your favorite FM radio stations.
AM Mode
- Turn mode switch knob to get the triangle on the knob pointing to “AM”
- White LED indicator above “AM” will be on
- Rotate FM/AM tuning knob to find your favorite AM radio stations.
Bluetooth Mode
- Turn mode switch knob to get the triangle on the knob pointing to “BT”
- White LED indicator above “BT” will be flash
- Use Bluetooth settings on your device to pair with “Hearth & Hand 02”
- The white light no flashes once connected successfully
AUX Mode
In any FM/AM/BT mode, insert AUX cable, the radio will play the input audio
Troubleshooting and Tips
- If the device is not working correctly, turn it on/off to reset
- If the device won’t turn on, recharge the battery and try again
- If the device won’t charge, make sure the supply works, is 5V 1A, and not damaged
- If the device makes no sound, adjust the volume
- If the device makes no sound or do not show as an available device, make sure it is not paired to another device. If so, unpair the device and re-pair the desired device
- This device does not have a pairing tone. If prompted for one, make sure you are connecting to the correct device. If not, “forget” the device and re-pair with your desired one
NOTE:
- Please keep the distance between the connected devices less than 33 feet to ensure working properly
Safety
Ensure that the device is used in accordance with the safety guidelines provided in the user manual. Take precautions to preventdamage or injury during use.
- Do not use near any water source
- Do not modify or repair this device
- Do not use in high temperatures or extreme weather
- Do not use chemical detergents to clean your device, use a soft dry cloth
INCLUDE
- Portable Bluetooth Radio
- Micro USB Charging Cable
- AUX Cable
PARTS
SPECIFICATIONS
- Power Input: 5V 1A
- Built-In Battery: 3.7V DC,1800 mAh
- Bluetooth Pairing Name: Hearth & Hand 02
Need some help?
Can’t get it to pair? Not accepting phone calls? Just have a question?
Call us at: 877-698-4883
Online at: TargetTechSupport.com
FCC CAUTION
FCC ID: 2AVTM-AM29SR1, Model: AM29S
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and
- This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause interference to radio
communications. The device has been evaluated to meet general RF exposure
requirement.
However, there is no guarantee that interference will not occur in a
particular installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct the interference
by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Target Corp.Mpls.MN,55403 Phone:1-612-304-6073
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>