X10 LY20 Pan And Tilt Camera User Manual
- June 13, 2024
- X10
Table of Contents
Pan and Tilt LY20
User Manual
Before using this product, please read the guide carefully to avoid any damages to the product, do not misconfiguration or misuse.
Product Overview
1.1 What’s included
The LINKED
APP is required to operate the camera. To sign up:
- Open the app and click Sign up.
- Enter your email or phone number, click send verification code.
- Get the verification code from your email or message, input it and set up the password.
- Sign in with the account and password.
1.1 Install SD Card
CAUTION:
Please insert the Micro SD Card according to the directions shown in the
diagram. Micro SD Card might JAM if inserted incorrectly and the device could
be damaged.
SD Card Slot:
Support micro SD card for local storage (Max 128GB).
Reset Button:
Used to restore the camera to factory settings (Press and hold for 5-8s).
Installation
2.1 App installation
For iPhone users:
Open the App Store and search for “X10 Linked” Download and install the Linked
app onto your iPhone.
For Android phone users:
Open the Google Play Store and search for “X10 Linked” Download and install
the Linked app onto your Android phone.
|
---|---
https://itunes.apple.com/us/app/x10-linked/id1101197003?mt=8|
https://play.google.com/store/apps/details?id=com.x10_linked.cam
2.2 Device Hardware installation
Connect the power supply to the camera device, then wait for the indicator
light to flash.
Different LED colors correspond to different camera status :
| Blue | System start up |
|---|---|
| Slow blue flash | Syncing mode |
| Fast blue flash | Connecting to Wi-Fi |
| Solid blue | Camera working properly |
2.3 User Account Registration
After opening the app for the first time, register your account by clicking
‘sign up’ and enter the email address.
- Click “Send code”, your email will receive a verification code, enter the code within 30 minutes.
- Input the password twice, click “Register immediately”.
- Your login information will be saved the next time you open the app; however, it is recommended that you write your login information down.
2.4 Camera Device and Phone Synchronization
Click Add Camera button, click on ‘connecting my camera’ Step 1: Check to see
if the front LED light is flashing: After powering on the camera, the LED
light should be flashing blue, click on ‘Next’ and proceed to Step 2.
Step 2: Connect to your wifi network(802.11 b/g/n 2.4GHz):
-
Find your wireless network in the first field. You can select ‘Other’ if you do not see your wireless network.
-
Enter your Wi-Fi password. If your wireless network does not have a password, click on the ‘No Wi-Fi password’ box.
Then click ‘Next’, select your timezone. -
Follow the instructions on the screen and move your phone speaker close to the camera’s microphone. Before doing so, make sure you are in a quiet environment without any noise interference and make sure your phone is not on silent. Then
click ‘send sound wave’. -
You will hear a scrambled sound being played from your phone. Keep your phone still and wait for the duration of the transmission, before you move your phone away. Afterwards, the voice prompt will indicate that the binding was successful
and the app will redirect to the camera view interface automatically. -
If you do not hear the voice prompt say, ‘binding successful’, you can try again by clicking the ‘Send sound wave’ or click on the hyperlink and follow the instructions.
App functions
3.1 Live video
After syncing successfully, click the IP Camera interface to view live video.
Smooth, SD and HD video definition are available.
3.2 Video Recording
Users can record video on live video interface , by pressing the red video
recording icon on the left, refer to photo below. The recorded video will be
stored in the album on the homepage of app. Playback: Click “Playback” icon
and choose the time to replay the video recorded in the MicroSD card.
Select the date and time you wish to playback. You can fast forward/backward
by swiping on the time bar. Tap on the camera icon to take a screen shot while
replaying the video. Refer to photo below. 3.3 SNAPSHOT SHARING
Our camera provides a function that shares any snapshot photos to Email/SMS,
etc. To access snapshots, please follow same directions as accessing your
video recording explained under playback feature, choose the photo you want to
share and the platform you want to share it from as indicated in Figure 1.
3.4 SUB-ACCOUNT MANAGEMENT
Sub-Accounts gives you the option to allow for multiple users live access to
the same camera. Each camera can support up to 15 live viewer accounts
(including the Administrator account). The administrator can add and delete
sub-accounts by using Sub-Account Management function. Refer Figures 2, 3 & 4
below. New sub-accounts can be setup by clicking on the “Add” button. Note:
Please follow the same procedure under user account registration in page 2 to
register and verify the email address you are willing to add as a subaccount
prior to adding it as new sub-account.
3.5
VIEWING LOCK
This function allows the user to watch live video and replay videos only after a password has been setup.
- To set up, click on the ‘Setting’ button in the IP camera page as indicated in Figure 5 & 6 below.
- In the Setting screen, tap on the ‘Video Lock’ button (defaulted to ‘Not Set’) as indicated in Figure 7 below.
- Then enter a password that you can remember.
3.6 TWO WAY AUDIO
When you are viewing camera, you can press the “Microphone Icon” as indicated
in Figure 8 above and talk or if the volume on the phone is up the voice from
the camera could be heard in the phone.
3.7 INFRARED NIGHT VISION
Infrared night vision is controlled by camera system automatically.
When the area around the camera becomes too dark, the infrared night vision
will activate automatically. Likewise, when the area around the camera is
bright enough, the night vision will deactivate automatically.
3.8 INFRARED ALARM
The camera uses infrared sensors when someone/something appears within its
detection area. The alarm on camera will ring for 5 seconds, and at the same
time, the phone will also ring and receive an alarm notification. Set the
alert notification message to access the live video feed. You can adjust the
timing of the alarm and enable/disable the alarm sound under the camera
setting.
3.9 REMOTE CONTROL YOUR LY20 BY APP
Enter the live video interface of the Linked Camera APP, using your finger to
slide the screen up/down/left/right to control the camera to rotate
vertically/horizontally.
Warning
-
When using the camera, please avoid rain, fire and lightning.
The camera’s working humidity range is: 20%-50% indoor, 20%-70% outdoor. Working temperature range is: -10°-50℃ (14°-122°F) indoor; -20°-55℃ (-4°-131°F) outdoor. -
The IP Camera is designed to ensure the security and confidentiality of its users, but cannot completely guarantee the threat of being compromised, due to various setup circumstances.
We highly advise that you only use the camera on a trusted password protected Wi-Fi network. This camera is recommended for general purpose monitoring only. The user acknowledges the risk of using the device otherwise.
FAQ
- Cannot bind camera device?
☆ User can only bind when the camera device is in the Binding mode (i.e. LED is blue and flashes once a second). Otherwise, you cannot bind a camera device when outside of the Binding mode. ☆ Make sure the environment around the camera is quiet when transmitting the “sound wave” and the outer speaker of your phone is close to the microphone in the side of the camera. ☆ If shown warning “WIFI does not exists”, please make sure your Wi-Fi network name is correct. ☆ If shown warning “WIFI connection fail”, please make sure your Wi- Fi password is correct. ☆ If shown warning “Network abnormal please check router configuration”, please make sure your router is connected to Internet.
- Cannot connect to Internet?
☆ Check the compatibility of the camera device with your router. Supports 802.11 b/g/n 2.4GHz wifi network. ☆ Check whether the name and password of WIFI has been changed.
- Video quality is not clear?
Switch between “SD” and “HD”.
- Cannot replay video?
☆ Check if there is a micro-SD card. ☆ Insert a micro-SD card, you can replay video after 10 minutes.
5) If the Wi-Fi is hidden, why cannot I find any network or camera device?
Our camera device can only connect to non-hidden Wi-Fi networks.
- How to restore Factory Settings?
While the camera device is on, use a small object to hold down the reset button located on the back of the unit for 3-5 seconds. During the period, do not unplug the camera device.
- Sound is not coming from app on phone?
Please make sure your phone is not on silent and the volume is turned up.
OTHER NOTES:
- To refresh your camera list, pull-down on the screen while viewing the camera list.
- After binding the device and phone successfully, if the camera device does not appear on the homepage, refresh the camera list interface. If the device is still not showing, log out of your account, then login again.
- There is approximately a 10-minute delay after a micro SD card has been inserted before you can replay videos.
- When testing the alarm function, after setting the alarm, please exit the app to receive the notification when the camera is triggered.
- 15 user accounts can view the live video of the camera simultaneously (if the account administrator shares access).
- The first account bound to the camera is defaulted as the administrator account.
- When syncing the camera device and phone, do not leave the binding page, please wait for the camera to finish automatically.