Rebel ZAR0557 LED Su Speaker Models User Manual
- June 13, 2024
- Rebel
Table of Contents
LIGHT
LED PROJECTOR
WITH SPEAKER
USER
MANUAL
model: ZAR0557
SAFETY INSTRUCTIONS
Please read this operation instruction carefully before first use, and keep it for future reference. If there are any doubts concerning correct installation, please consult a qualified specialist.
- Protect this device from water, humidity and other liquids. Avoid using/storing it in extreme temperatures. Do not expose it to direct sunlight and other sources of heat.
- Do not use the device nearby open flames such as candles.
- Do not place the device on an unstable surface.
- Protect the device from shock.
- Product for indoor use only. Do not use outside!
- Do not cover the device with clothes, paper or anything flammable.
- Do not look directly at LED light beam! Risk of eye damage.
- This appliance may be used by children who are above 8 years old and by persons with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, if they are supervised and guided by a person who is responsible for their safety in a cautious manner for all the safety precautions being understood and followed. Children should be supervised to ensure that they do not play with the appliance. Children should not perform cleaning and servicing of the device unsupervised.
- Keep the device out of the reach of children.
- Prior to each use, inspect for any cracks or damage.
- Do not use this device if it has been damaged.
- Do not attempt to repair this device yourself. In case of damage, contact authorized service point for check-up or repair.
- Always disconnect the device from the power mains before cleaning.
- Clean this device with a soft, slightly damp cloth. Do not use any chemical agents to clean this device.
PRODUCT DESCRIPTION
LED projector
-
USB port
-
Push the switch left/right to decrease/increase brightness
(3 levels available); Press the switch to turn off the LED light -
Press to go to the previous track/ Press and hold to reduce volume
-
Press to go to the next track/ Press and hold to increase volume
-
Play/Pause
-
Press to switch between the modes (Bluetooth/USB)
-
USB-C input
-
ON/OFF switch
-
IR sensor
Remote control
- Turn on/off the LED light
- Turn on/off the laser light
- Turn on the red light
- Turn on the green light
- Increase volume
- Previous track
- Next track
- Decrease volume
- When playing music, press this button and the LED light will follow music sound
- Turn on the blue light
- Turn on the white light
- Increase LED light moving speed (Pause – Slow – Medium – Fast)
- Decrease LED light moving speed (Fast – Medium – Slow – Pause)
- Cancel timer function. LED and laser light flash three times to confirm setting
- LED light moves circularly in red – green – blue – white single color mode and laser lights in gradation mode
- LED light moves circularly in red blue – red green – red white – blue green – blue white – green white double-color mode and laser lights in gradation mode
- Turn on 1 hour timer. LED and laser light flash three times to confirm setting. After one hour, the device will automatically turn off
- Adjust LED light brightness (70% – 40% – 40% – 70% – 100%)
- Switch the laser light to stay on or enter gradation mode
- Turn on 2 hour timer. LED and laser light flash three times to confirm setting. After two hours, the device will automatically turn off
- Turn on/off music playback
Note: The RGBW buttons can be combined by two to form a double color projection.
REMOTE CONTROL BATTERY INSTALLATION
- Open the battery cover.
- Install 2x AAA battery with correct polarization (+/-).
- Close the battery cover.
Notes:
- Always point the IR sensor of the remote control towards the IR sensor on the front of the appliance.
- Use only specified batteries.
- Do not mix different types of batteries.
- Replace all batteries at the same time.
- Please remove the batteries if the remote control is not going to be used for a long time.
OPERATION
- Plug the USB plug of the included cable into the compatible AC adapter; then plug the USB-C plug to the USB-C input on the device. Connect the AC adapter to the power supply socket.
- Push the ON/OFF switch right to the ON position.
- Use the remote control to set the desired light effects and adjust them to your preferences.
- To play music, connect the USB flash drive to the USB input of the device or connect via Bluetooth.
- Control music playback with the remote control or use the control panel on the device.
BLUETOOTH PAIRING
- Bluetooth mode is turned on automatically when the device is being switched on.
- Turn on the Bluetooth function on your smartphone and search for new Bluetooth devices.
- Select and connect with this device (BTK10).
- After successful pairing the device will issue a voice prompt.
Notes: Every time the speaker is turned on, it will connect to the last connected device automatically. Please note your device must be on with Bluetooth function turned on.
USB
- Connect the USB flash drive to the USB input of the device.
- The device will automatically recognize connected equipment. Automatic shut off: The device will automatically turn off after 4 hours of operation.
SPECIFICATION
Light source: 2 x 4 W LED
Color: red, green, blue, white
Light effects: 10
Projection range: 15 – 20 m
Laser power: <1 mW
Speaker power: 3 W
Impedance: 4 Ohm
Bluetooth: 5.0
Bluetooth range: up to 10 m
Bluetooth profiles: A2DP/AVRCP/HFP
Supported formats: MP3, WAV, WMA, FLAC
USB input
Timer
Automatic shut down
Casing material: ABS
Usage: indoor
IP rating: IP20
Class of protection: III
Operating temperature: -10°C – 45°C
Remote control power supply: 2x AAA battery
AC adapter:
Input: 100 – 240 V; 50/60 Hz
Output: 5 V / 2 A
Height: 123 mm
Diameter: 164 mm
Weight: 305 g
Set includes: remote control, USB cable
Correct Disposal of This Product
(Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate collection systems) This marking shown on the product or Its literature, indicates that It should not be disposed with other household wastes at the end of its working life. To prevent possible harm lo the environment or human health from uncontrolled waste disposal, please separate this from other types of wastes and recycle it responsibly to promote the sustainable reuse of material resources. Household users should contact either the retailer where they purchased this product, or their local government office, for details of where and how they can take this item for environmentally safe recycling. Business users should contact their supplier and check the terms and conditions of the purchase contract This product should not be mixed with other commercial wastes for disposal.
Made in China for Lechpol Electronics Leszek Sp.k., ul. Garwolińska 1, 08-400 Miętne.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>