AEG BSS18MTF12BL Nut Driver Instruction Manual
- June 4, 2024
- AEG
Table of Contents
AEG BSS18MTF12BL Nut Driver
Operating Description and Functional Description
Remove The Battery
Remove the battery pack before starting any work on the product.
TECHNICAL DATA
WARNING!
The declared vibration total values and the declared noise emission values
given in this instruction manual have been measured in accordance with a
standardized test and may be used to compare one tool with another. They may
be used for a preliminary assessment of
exposure.The declared vibration and noise emission values represent the main
applications of the tool. However, if the tool is used for different
applications, used with different accessories, or poorly maintained, the
vibration and noise emission may differ. These conditions may significantly
increase the exposure levels over the total working period. An estimation of
the level of exposure to vibration and noise should take into account the
times when the tool is turned off or when it is running idle. These conditions
may significantly reduce the exposure level over the total working period.
Identify additional safety measures to protect the operator from the effects
of vibration and noise, such as maintaining the tool and the accessories,
keeping the hands warm (in case of vibration), and organizing wok patterns.
WARNING! Read all safety warnings, instructions, Failure to follow all instructions listed below may result in electric for future reference. Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. Save all warnings and instruction for future reference.
IMPACT WRENCH SAFETY WARNINGS
Hold the power tool by insulated gripping surfaces, when performing an
operation where the fastener may contact hidden wiring. Fasteners contacting a
“live” wire may make exposed metal parts of the power tool “live” and could
give the operator an electric shock.
ADDITIONAL SAFETY AND WORKING INSTRUCTIONS
Clamp the work piece with a clamping device. Unclamped Work pieces can
cause severe injury and damage. The product will restart automatically if
stalled. Tun off the product immediately if it stalls. Do not turn on the
product again while it is still stalled, as doing so could trigger a sudden
recoil with a high reactive force. Determine why the product stalled and
rectory this, paying heed to the safety instructions. The dust produced when
using the product may be harmful to health. Do not inhale the dust. Wear a
suitable dust protection mask. Remove the battery pack before starting any
work on the product.
SPECIFIED CONDITIONS OF USE
The product is intended for fastening and loosening bolts and nuts. Do not use
the product for any other purpose.
ADDITIONAL BATTERY SAFETY WARNINGS
WARNING! To reduce the risk of fire, personal injury, and product damage
due to a shot circuit, never immerse your tool, battery pack, or charger in
fluid or allow fluid to flow inside them. Corrosive or conductive fluids, such
as seawater, certain industrial chemicals, and bleach or bleach containing
products, etc., can cause a short circuit.Do not dispose of Used battery packs
in the household refuse or
by burning them. AEG distributors offer to retrieve old batteries to protect
our environment. Use only AEG chargers for charging AEG battery packs. Do not
use |battery packs from other systems. Never break open battery packs and
chargers, and store them only in dry rooms. Keep battery packs and chargers
dry at all times. Battery packs that have not been used for some time should
be recharged before use.Temperatures in excess of 50°C (122°F) reduce the
performance of the battery pack. Avoid extended exposure to heat or sunshine
(risk of overheating). The contacts of chargers and battery packs must be kept
clean. For an optimum life-time, the battery packs have to be fully charged
after use. To obtain the longest possible battery life, remove the battery
pack from the charger once it is fully charged. For batter pack storage longer
than 30 days:
- Store the battery pack where the temperature is below 2/C and away from moisture.
- Store the battery packs in a 30% – 50% charged condition.
- Every six months of storage, charge the pack as normal.
BATTERY PACK PROTECTION
The battery pack has overload protection that protects it from being
overloaded and helps to ensure long life. Under extreme stress, the battery
electronics turn off the product automatically. To restart, turn the product
off and then on again. If the product does not start up again, the battery
pack may have discharged completely. Recharge the battery pack.
TRANSPORTING LITHIUM BATTERIES
Lithium-ion batteries are subject to the Dangerous Goods Legislation
requirements. Transportation of those batteries has to be done in accordance
with local, national, and international provisions and regulations.
- Batteries can be transported by road without further requirement.
- Commercial transport of lithium-ion batteries by third parties is subject to Dangerous Goods Regulations. Transport preparation and transport are exclusively to be carried out by appropriately trained persons and the process has to be accompanied by corresponding experts.
When transporting batteries:
- Ensure that the battery contact terminals are protected and insulated to prevent short circuit.
- Ensure that the battery pack is secured against movement within the packaging.
- Do not transport batteries that are cracked or leaking.
Check with the forwarding company for further advice.
MAINTENANCE
Use only AEG accessories and spare parts. Should components that have not been described need to be replaced, contact one of our AEG service agents (see our list of guarantee/service addresses).If needed, an exploded view of the product can be ordered. State the product type and the serial number printed on the label, and order the drawing at your local service agents or directly at: Techtronic Industries GmbH, Max-Eyth-Straße 10, 71364 Winnenden, Germany.
SYMBOLS
- Read the instructions carefully before starting the product.
- CAUTION! WARNING! DANGER!
- Remove the battery pack before starting any work on the product.
- Wear eye protection.
- Wear protective gloves.
- To reduce the risk of injury or damage, avoid contact with any hot surface.
- Do not dispose of electric tools, batteries/rechargeable batteries together with household waste material. Electric tools and batteries that have reached the end of their life must be collected separately and returned to an environmentally compatible recycling facility. Check with your local authority or retailer for recycling advice and collection point.
No-load speed- Volts
- Direct current
- European Conformity Mark
- Ukraine Conformity Mark
- EurAsian Conformity Mark
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>