DS18 CA-X3DS6LD Maverick X3 Dash Board 6.5 Speaker Panel Owner’s Manual
- June 13, 2024
- DS18
Table of Contents
DS18 CA-X3DS6LD Maverick X3 Dash Board 6.5 Speaker Panel Owner's Manual
CAN-AM X3 DASHBOARD PANEL FOR 6.5″ SPEAKERS WITH NXL-6/BK INCLUDED
INTRODUCTION: If you’re looking to maximize sound in your Can-Am X3, you may consider adding these durable Polyethylene Dashboard Panels by DS18. These panels include two 6.5″ Waterproof Speakers with RGB LED lights (NXL-6/BK) that your stereo system deserves. These panels come in pairs (Driver & Passenger) and they are very easy to Install using factory bolts that fits directly into place.
FEATURES:
- Panels Sold as a Set for Driver and Passenger Sides.
- Includes one set of 6.5″ NXL-6/BK Waterproof Speaker with RGB LED.
- Easy to install using Factory bolts and location.
- OFC tinned wiring for more power handling and durability.
- 6 core 0.6M Input Wires for Speaker and RGB lighting.
- Fits all Can-Am X3 from 2017 to 2023. · Black OEM finish.
- Durable (PE) waterproof Panels with UV Protection.
- Open Baffle Speaker Panel Design.
WHAT’S IN THE BOX:
- Left & Right Speaker Panels
- 2 x NXL-6/BK Speakers
- Speaker Wiring Harness
⚠ TRAIL ACTIV SMART MODULE DISCLAIMER:
The placement of the driver’s side speakers can affect the performance of the
Smart-Lok module if equipped, resulting in inadvertent correction of the
steering wheel, which affects the driving experience and can be dangerous if
not corrected correctly. After installation of these speaker panels, you will
need to have the module recalibrated at a servicing Can-Am dealer or relocate
the module with a Smart-Lok Module Relocation Kit to avoid this issue.
INSTALLATION
Step 1: Locate the factory dash panels and remove the 7 screws (T-30 Torx)
with 2 clip retainers for the driver side and the 5 screws (T-30 Torx) with 2
clip retainers for the passenger side as you can see in image #1.
Step 2: If the vehicle is equipped with the Smart-Lok module, first disconnect the negative battery post, located behind the passenger side seat, then you can safely unplug the Smart-Lok module and disconnect all the left side rocker switches to remove the factory dash panel as you can see in image #2.
Step 3: Once you have the panel out of the vehicle, place it face down and
remove the Smart-Lok module from the factory panel (if equipped) by removing
the 4 x 8mm screws from the bracket and transfer to the new CA-X3DS6LD panel
using the same 8mm factory bolts as you can see in image #3
Step 4:
Transfer the rocker switches from the factory panel to the new CA-X3DS6LD
panel simply by pushing them from their base, don’t forget to do it in the
same order as before so the wiring will fit correctly.
Step 5: Transfer the clip retainers with their washers Paso from the factory panel to the new CA-X3DS6LD panel on both sides as you can see in image #5.
Step 6: Reinstall the panels by snapping them into place, reconnect the Smart- Lok module (if equipped) and the rocker switches, then you can secure the panels with the same factory screws and pins, this concludes the installation of the CA-X3DS6LD panels as you can see in image #6.
NOTES: This kit needs an aftermarket amplifier pre-installed with the speaker wires in this location, only after this step can you connect the speakers using the aftermarket amp’s speaker wire and RGB LED wires (optional) of the LED module (LED -BTC not included).
CONNECTION OPTIONS
1 If you have an LED Control Module (LED-BTC), Connect as Shown in the Following Diagram:
2 To connect without LED Control Module (LED-BTC), Connect as Shown in the Following Diagram:
- Black wire “BK” connected to battery Positive (+) 12V
- White Color Light “R”; “B” and “G” connected to battery Negative (-)
- Green Color Light “G” connected to battery Negative (-)
- Red Color Light “R” connected to battery Negative (-)
- Blue Color Light “B” connected to battery Negative (-)
- Purple Color Light “R” and “B” connected to battery Negative (-)
- Yellow Color Light “R” and “G” connected to battery Negative (-)
- Cyan Color Light “B” and “G” connected to battery Negative (-)
GENERAL SPECIFICATIONS
Box Type ………………………………………………………………………………. Front Baffle
Box Material …………………………………………………………… Polyethylene (PE)
Finish Material ………………………………………………………………………………………….Black
UV Protection ………………………………………………………………………………………………………………… Yes
Waterproof Rating ……………………………………………………………………………………….. IP65
Total Impedance ……………..4+4 Ohms (Left & Right)
Input Wire (Harness) .. …6 Core OFC Tinned (2ft / 0.6m)
SPEAKER SPECIFICATIONS
Speaker Type / Size .. ………………………………………………………………. 6.5″ Waterproof Coaxial with
RGB LED
RMS Power Handling …………………………………………………………………………100W
MAX Power Handling ………………………………………………………………………..300W
Sensitivity (1w/1m) …………………………………………………………………………………..91dB
Frequency Response ……………………………………………………………..45Hz-20KHz
Recommended Hi Pass Crossover ……………………………….65Hz
Voice Coil Diameter …………………………………………………….. 1.2″ / 30.5mm
Voice Coil Former Material ………………………………………………..Kapton
Winding Material ……………………………………………………………………………………… CCAW
Cone Material…………………………………………………………… Injection Molded Polypropylene + UV
Compliant
Surround Material………………………………….. Butyl (Rubber)
Basket Material ……………………….High Temp Injection Molded Composite with UV
Protection coating
Magnet Material ……………………………………Ferrite + Neodymium
Magnet Weight ………………………………………………………………………………….. 14oz + 0.32oz
MEASUREMENT
Overall Height (Driver Side) ………………………………………………………………………. 5.86″ / 149mm
Overall Width (Driver Side) ……………………………………………………………………………20″ / 506mm
Overall Depth (Driver Side) ……………………………………………………………. 20.47″ / 520mm
Overall Height (Passenger Side) …………………………………………………………………..6.1″ / 155mm
Overall Width (Passenger Side) ………………………………………………………………… 20.4″ / 518mm
Overall Depth (Passenger Side) ……………………………………………………….. 19.3″ / 490mm
Speaker Mounting Hole …………………………………………………..5.7″ / 145mm
WARRANTY
Please visit our website DS18.com for more information on our warranty policy.
We reserve the right to change products and specifications at any time without
notice. Images may or may not included optional equipment.
⚠ WARNING:
Cancer and Reproductive Harm.
www.P65Warning.ca.gov