VFC400 Vaccine Temperature Data Logger User Guide
- June 13, 2024
- VFC
Table of Contents
VFC400 Vaccine Temperature Data Logger User Guide
Installation
Your kit includes:
- VFC400 Data Logger
- Stainless Steel Probe encased in glycol
- Acrylic stand for probe and mounting equipment for logger
- Adhesive backed zip tie mounts and zip ties for securing cable
- Spare battery
- 2 year NIST traceable Certificate of Calibration compliant to ISO 17025:2017
- Place acrylic stand and probe vial nearthe middle of the fridge/freeze
- Route the cable under the wire rack and secure with zip tie
- Route the cable toward the wall of the hinge side and secure with zip tie
-
Route the cable toward the front of the fridge/freezer on the hinge sideand secure
-
Place the glycol bottle in thefridge/freezer for at least 1.5 hours prior to starting your logger to allow thesolution to reach the appropriate temperature.
-
Adhere the mounting bracket to the side or front of your fridge/freezer
-
Place the logger into the mounting bracket and plug the sensor wire into the logger (left side)
-
Approx. 6 inches underneath the logger,adhere cable tie bracket and secure the cable witha Zip tie. Leave enoughslack in the cable so youcan plug and unplug the VFC400 easily
Control Solutions, Inc. | 503-410-5996 | support@vfcdataloggers.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>