OMX-HDCAT1X4-LR Ocean Matrix 1×4 HDBaseT Splitter Extender Instruction Manual

OMX-HDCAT1X4-LR
Ocean Matrix 1×4 HDBaseT Splitter
Extender Set- 4K60 up to 393ft/120m
OPERATION MANUAL

Description:

The Ocean Matrix OMX-HDCAT1X4-LR is a 1×4 HDMI HDBaseT splitter extender set that extends 4K60 signals up to 393ft. The splitter can distribute 1 source signal to any 4 display devices with its 4 HDBaseT outputs, and also features an HDMI loop out on the transmitter for local monitoring. The OMX-HDCAT1X4 also supports HDMI, Coaxial, and Analog audio extraction as well as RS-232 and EDID management.

Features:

• Supports Video Resolutions up to 4K2K@60Hz 4:4:4
• HDMI 2.0b, HDCP 2.2 and HDCP 1.x Compliant
• Supports EDID Management
• 18 Gbps Video Bandwidth
• Supports HDR, HDR10+, HLG and Dolby Vision
• 7.1CH HD Audio Pass-through
• Digital and Analog Audio De-embedded Output
• Extends Signal Transmission Distance up to 120 Meters at Resolutions of 4K2K@60Hz, and 150 Meters at 1080p@60Hz via a Single CAT6/6a/7 Cable
• 1 HDMI Input, 1 HDMI Loop Output, and 4 HDBaseT Outputs
• IR & RS-232 Routed to HDBaseT Output
• One-way POC Functionality (Transmitter powers the receivers)
• Compact Design for Easy and Flexible Installation

Specifications:

• Input: 1 x HDMI Type A (19-pin Female)
• Outputs: 1 x HDMI Type A (19-pin female) 4 x CAT OUT [RJ45, 8-pin female] 1 x Coaxial Audio OUT [RCA] 1 x L/R Audio OUT [3.5mm Stereo Mini-jack] 1 x Phoenix Connector Output Jack
• Control Inputs and Outputs: 1 x RS-232 (3-pin Phoenix Connector) 1 x EDID DIP switch [5-pin] 1 x IR IN [3.5mm Stereo Mini-jack] 1 x IR OUT [3.5mm Stereo Mini-jack]
• HDMI Compliance: HDMI 2.0
• HDCP Compliance: HDCP 2.2 / HDCP 1.4
• Video Bandwidth: 18Gbps
• Video Resolution: Up to 4K2K@60Hz 4:4:4
• Color Space: RGB / YCbCr 4:4:4, YCbCr 4:2:2, YCbCr 4:2:0
• HDR: Supports HDR10, HDR10+, HLG & Dolby Vision
• HDMI Audio Formats: LPCM 2.0/2.1/5.1/6.1/7.1, Dolby Digital, Dolby TrueHD, Dolby Digital Plus(DD+), DTSES, DTS HD Master, DTS HD-HRA, & DTS-X
• Coaxial Audio Formats: PCM2.0, Dolby Digital / Plus, DTS 2.0/5.1
• Analog Audio Formats: PCM 2.0CH
• Transmission Distance: 4K2K@60Hz, 120m / 1080P@60Hz, 150m
• Dimensions (LxWxH): Transmitter: 8.69 x 5.13 x 1.59″ Receiver: 5.52 x 2.57 x 0.07″
• Weight: Transmitter: 1.91lbs Receiver: 0.55lbs
• Power Consumption: 35W
• Operating Temperature: 32-104 °F (0-40 °C)
• Storage Temperature: -4-140 °°F (-20-60 °C)

Item Includes:

• 1 x Transmitter
• 4 x Receiver
• 5 x IR Blaster Cable (1.5 meters)
• 5 x 20K-60KHz IR Receiver Cable (1.5 meters)
• 5 x 3-pin Phoenix Connector
• 1 x 5-pin Phoenix Connector
• 10 x Mounting Ear
• 1 x 24V/2.7A DC Locking Power Adapter

Operation Controls and Functions:

green LED will be on
3| Loop LED| When the HDMI LOOP OUT port connects to an active display device, the green LED will be on
4| Out LED (1-4)| When the CAT OUTPUT port connects an active display device, the corresponding green OUT LED will be on

cable for the following functions: 1, Control the Splitter via RS-232 commands; 2, RS-232 signal pass-through (from transmitter to receiver or from receiver to transmitter)
2| IR IN| Connect to IR receiver cable, the IR receive signal will emit to “IR OUT” port of the HDBaseT Receiver
3| IR out| Connect to IR blaster cable, the IR emit signal is from “IR IN” port of the HDBaseT Receiver
4| AUDIO OUT (COAX, L/R & Phoenix Connector)| Coaxial/balanced audio output port, connect to amplifer or speaker
5| POWER switch| Press this switch to power on/off the device
6| EDID DIP switch| Used to set EDID mode
7|  HDMI port| IN: HDMI input port, connect to HDMI source device such as DVD or settop box with an HDMI cable
LOOP OUT: HDMI loop output port, connect to the HDMI display device such as TV or Monitor with an HDMI cable
8| HDBT OUTPUTport (1~4)| Connect to the HDBT IN port of the HDBaseT receiver with a CAT cable
9| Indicator lamp (Green)| lluminated: Transmitter and receiver are connected / Dark: Transmitter and receiver are not connected
10| Data Signal Indicator lamp (Orange)| Illuminate: There is signal transmission between the transmitter and the receiver, dark: No signal transmission
11| Power Supply Input| DC 24V Power supply input

Operation Controls and Functions:

cable
5| HDMI OUT| HDMI output port, connect to HDMI source device
6| Audio Out| 3.5mm TRS audio output port, connect to amplifer or speaker
7| IR IN| Connect to IR receiver cable, the IR receive signal will emit to “IR OUT” port of the HDBaseT Receiver
8| IR out| Connect to IR blaster cable, the IR emit signal is from “IR IN” port of the HDBaseT Receiver
9| RS232| Connect to a PC or control system via a 3-pin phoenix connector cable for the following functions: 1, Control the Splitter via RS-232 commands; 2, RS232 signal pass-through (from transmitter to receiver or from receiver to transmitter)

Operation Controls and Functions:
EDID:

– Input Device Must Be Set to AUTO to Use EDID Controls –

ASCII Commands:

ASCII Commands
Serial port protocol. Baud rate: 115200 | Data bits: 8bit | Stop bits:1 | Check bit: 0
x – Parameter
y – Parameter 2
! – Delimiter

Command Code Function Description Example Feedback Default Setting

Power
s power z!| Power on/off the device, z=0-1
(z=0 power off, z=1 power on)| s power 1!| Power on
System Initializing… Initialization Finished! FW version x.xx.xx| power on
r power!| Get current power state| r power!| power on/power off|
s reboot!| Reboot the device| s reboot!| Reboot…
System Initializing… Initilization Finished! FW version x.xx.xx|
System Setup
help!| list all commands| help!| |
r status!| Get device current status| r status!| Get the unit all status: power, in/out connection, EDID mode|
r fw version!| Get firmware version| r fw version!| MCU Boot: Vx.xx.xx
MCU APP: Vx.xx.xx|
r link in!| Get the connection status of the input port| r link in!| HDMI in: connect|
r link out y!| Get the connection status of the y output port, y=0-5 (0=a11, 1-4=HDBT 1-4,5=loop out)| r link out 1!| HDMI loop out: connect HDBT output 1: connect|
s reset!| Reset to factory defaults| s reset!| Reset to factory defaults
System Initializing… Initialization Finished! FW version x.xx.xx|
Output Setting
s HDMI stream z!| Set HDMI loop output stream on/off z=0-1 (0:disable, 1:enable)| s HDMI stream 1 !| Enable HDMI loop out stream Disable HDMI loop out stream| enable
s HDMI hdcp z!| Set HDMI loop output HDCP on/off z=0-1 (0:disable, 1:enable)| s HDMI HDCP 1!| Enable HDMI loop out HDCP Disable HDMI loop out HDCP| enable
s HDBT y HDCP z!| Set HDBT output y HDCP on/off, y=0-4 (0=a11) z =0-1 (0:disable, 1:enable)| s HDBT 1 HDCP 1 ! s HDBT 0 HDCP 1 ! Enable HDBT output 1 HDCP| Disable HDBT output 1 HDCP Enable HDBT all outputs HDCP Disable HDBT all outputs HDCP| enable

ASCII Commands:

Output Setting (continued)
s HDBT y stream z!| Set HDBT output y stream on/off, y=0-4 (0=a11) z=0-1 (0:disable, 1:enable)| s HDBT 1 stream 1 ! s HDBT 0 stream 1 !| Enable HDBT output 1 stream Disable HDBT output 1 stream Enable HDBT all output stream Disable HDBT all outputs stream| enable
r HDMI stream!| Get HDMI loop out stream status| r HDMI stream!| Enable HDMI ouput stream|
r HDMI HDCP!| Get HDMI loop out HDCP status| r HDMI
HDCP!| Enable HDMI output HDCP|
r HDBT y HDCP!| Get HDBT output y HDCP status, y=0-4 (0=a11)| r HDBT 1stream!| Enable HDBT output 1 stream|
EDID Setting
s EDID in from z!| Set input EDID from default EDID z, z=1-27
1. 1080p, Stereo Audio
2. 0 2.1080p,Dolby/DTS 5.1
3. 1080p,HD Audio 7.1
4. 1080i,Stereo Audio 2.0
5. 1080i,Dolby/DTS 5.1
6. 1080i, HD Audio
7. 1 7.3D,Stereo Audio 2.0 8.3D,Dolby/DTS 5.1
9. 3D,HD Audio 7.1
10. 4K2K30_444, Stereo Audio 2.0
11. 4K2K30_444, Dolby/DTS 5.1
12. 4K2K30_444, HD Audio 7.1
13. 4K2K60_420, Stereo Audio 2.0
14. 4K2K60_420, Dolby/DTS 5.1
15. 4K2K60_420, HD Audio 7.1
16. 4K2K60_444, Stereo Audio 2.0
17. 4K2K60_444, Dolby/DTS 5.1
18. 4K2K60_444, HD Audio 7.1
19. 4K2K60_444, Stereo Audio 2.0 HDR
20. 4K2K60_444, Dolby/DTS 5.1 HDR
21. 4K2K60_444, HD Audio 7.1 HDR
22. copy from hdmi loop out
23. copy from hdbt output 1
24. copy from hdbt output 2
25. copy from hdbt output 3
26. copy from hdbt output 4
27. use userl EDID| s EDID in from 1!| input EDID: 1080p, Stereo Audio 2.0
Please toggle EDID dip switch to 00000!| 1080p, Stereo Audio 2.0
s EDID userl 00 FF FF FF FF …!| Set userl EDID data s EDID used| 00 ff ff ff ff ….. i| userl EDID data: 00 FF FF ….|
r EDID userl!| Get userl EDID data| r EDID userl!| userl EDID data: 00 FF FF FF FF FF FF 00 ………|
r EDID in!| Get EDID status of the input| r EDID in!| input EDID: 4K2K60_444, Stereo Audio 2.0|
r EDID in data!| Get the EDID data of the HDMI input| r EDID in data!| EDID data: 00 FF FF FF FF FF FF 00|

ASCII Commands:

Command Code| Function Description| Example| Feedback| Default Setting
---|---|---|---|---
RS-232 BYPASS Setting
s rs232 bypass hdbt y!| Set RS-232 port connect to HDBT out1
Receiver RS-232 port, y=0-5 (0=a11, 1-4=HDBT out 1-4 5=NC)| s rs232 bypass HDBT 1!| RS-232 connect to HDBT OUT1 RS-232 not connected to HDBT OUT| y=0
r rs232 bypass!| Get RS-232 port connects to HDBT out receiver RS-232 port| r rs232 bypass!| RS-232 connects to HDBT outl RS-232 connects to all HDBT OUT RS-232 not connected to HDBT OUT|
s device baud w size x stop y parity z!| Set receiver control device COM port setting,
w=2400, 4800, 9600, 19200, 38400, 57600, 115200, x=7,8
y=12
z=none, even, odd| s device baud 57600 size 8 stop 1 parity none!| Receiver device COM port setting
baudrate: 57600
data size: 8, stop: 1
parity: none|
s rs232 time x!| Set send RS-232 command wait time x=200-5000ms| s rs232 time 200!| Send RS-232 command wait time 200ms| 200ms

Operation Controls and Functions:

PRODUCT SERVICE

Damage requiring service:

• The unit should be serviced by qualified service personnel if:
• (a) The DC power supply cord or AC adaptor has been damaged
• (b) Objects or liquids have gotten into the unit
• (c) The unit has been exposed to rain
• (d) The unit does not operate normally or exhibits a marked change in performance; The unit has been dropped or the cabinet is damaged.
• (2) Servicing Personnel: Do not attempt to service the unit beyond that described in these operating instructions. Refer all other servicing to authorized servicing personnel.
• (3) Replacement parts: When parts need replacing ensure the servicer uses parts specified by the manufacturer. Unauthorized substitutes may result in fire, electric shock, or other hazards.
• (4) Safety check: After repairs or service, ask the servicer to perform safety checks to confirm that the unit is in proper working condition.

SAFETY PRECAUTIONS

Please read all instructions before attempting to unpack, install or operate this equipment and before connecting the power supply.
Please keep the following in mind as you unpack and install the unit:

• Always follow basic safety precautions to reduce the risk of fire, electrical shock and injury to persons.
• To prevent fire or shock hazard, do not expose the unit to rain, moisture or install this product near water.
• Never spill liquid of any kind on or into this product.
• Never push an object of any kind into this product through any openings or empty slots in the unit, as you may damage parts inside the unit.
• Do not attach the power supply cabling to building surfaces.
• Use only the supplied power supply unit (PSU). Do not use the PSU if it is damaged.
• Do not allow anything to rest on the power cabling or allow any weight to be placed upon it or any person walk on it.
• To protect the unit from overheating, do not block any vents or openings in the unit housing that provide ventilation and allow for sufficient space for air to circulate around the unit

WARRANTY
1 Year

812 Kings Highway | Saugerties, NY 12477 | 845-246-7500 | www.oceanmatrix.com
100% Employee Owned Division of Tower Products Incorporated

Documents / Resources

| OCEAN MATRIX OMX-HDCAT1X4-LR Ocean Matrix 1x4 HDBaseT Splitter Extender [pdf] Instruction Manual
OMX-HDCAT1X4-LR, OMX-HDCAT1X4-LR Ocean Matrix 1x4 HDBaseT Splitter Extender, Ocean Matrix 1x4 HDBaseT Splitter Extender, 1x4 HDBaseT Splitter Extender, Splitter Extender, Extender
---|---

References

• Ocean Matrix - Affordable Interfaces for Broadcast and Pro-AV

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>