Jianghuan S1L Portable Wireless Speaker Instruction Manual

Portable Wireless Speaker
Simplicity
from precision machining

Precautions

The radio function is not applicable to the products in Europe, Canada and the United States.
The waterproof grade is ipx4. Please do not immerse the product in water.

Product instruction:

1. Short press to the previous song;long press volume down; when in Radio mode, shot press to previous channel

2. Long press 3s to power on/off :short press transfer to (TF Card Memory, Radio, Wireless, AUX Input) function ; If itis powered off,it will be “Reset” after long press 10s

3. Short press: play/pause/handsfree/hand Up;
   Long press (1s) :refuse the phone call
   When in Radio mode, short press to mute the speaker, long press to search for channels,
   Double click: switch the light effect of LED light circle

4. Short press to next song;long press volume up.When in the radio mode, short press to next channel

5. TF card Slot

6. Charging indicator light: the red light is always on when charging, and the red light is off when fully charged

7. TYPE-C charging port

8. MIC

9. 3.5mm Audio Connetor

10. Speaker dazzle light effect indicator: the dazzle light is ice blue flash when starting up; After Wireless connection, the indicator light flashes; When playing, the color of the colorful lights is ice blue/red/orange/ yellow/green/white/purple. Double click to play temporarily Stop button can switch different colors and effects. The lamp effect switching operation of TF card mode/radio mode/ Wireless mode is the same; In AUX input mode, the LED light for playing music is always on, and it flashes in breath state when pausing.

TWS Function:

After the two speakers are turned on,press one of the “buttons twice,and the speaker will find another pair.After the pairing as retained,a brisk tone was found. At this point,connect Wireless to play muisc together.

Specifications

1. The working time of the speaker varies depending on the music type or volume played.
2. The speaker will turn off automatically if you leave Wireless unconnected after turning on over about 5 minutes.

Warranty Service

• Please fully charge this product for the first time.
• Do not remove or repair this product for any reason, otherwise it may cause fire, electronic breakdown or even completely damage the product.
• Do not soak the product in liquid.
• If charging is completed, please disconnect the charger from the device, unplug the charger, and charge continuously do not exceed 12 hours. Please do not throw the old battery into the old household garbage for disposal. Improper disposal of the battery may cause the battery in case of fire or explosion, please handle this product, battery and other accessories according to local regulations.
• The battery shall not be disassembled, impacted, squeezed or put into the fire. In case of serious expansion, please do not continue to use it.
• Do not repair this product by yourself.
• The battery shall not be exposed to overheating. Please use a DC 5V power adapter that complies with national standards and has passed CCC certification for charging.

FCC Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation. Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
*Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>