boAt Airdopes Joy Premium Wireless Earbuds with Large Playback User Guide

Airdrops Joy Premium Wireless Earbuds with Large Playback
User Guide

Airdopes Joy Premium Wireless Earbuds with Large Playback

Get ready to immerse yourself in musical bliss with your very own pair of boAt Airdrops Joy. Please consider this manual as your guiding map towards the unparalleled shores of auditory realm. Know-edge of Bluetooth and device connectivity is essential for steering this boat and therefore we strongly recommend thorough reading of this manual. Also, you may refer to the same at times when you face any sort of difficulty.

PACKAGE CONTENTS

1. 1x Pair of TWS Earbuds
2. 1x Charging Case
3. 1x Type-C Charging Cable x User Mauna!
4. lx Warranty Card lx Catalogue
5. lx FAO Card

OVERVIEW

1. CTC (Capacitive Touch Control) / Power Button

POWER ON (FIRST TIME USER)

Step 1. To switch the earbuds on (Smart Power On) simply open the lid of the charging case (when earbuds are inside). Courtesy our IWPTM’ (Insta Wake N’ Pair) technology, the earbuds power on automatically, get connected and enter the connection mode OR
Long touch the CTC (Capacitive Touch Control) on both earbuds for 3 seconds to manually power on the earbuds
Step 2. After powering on. the earbuds enter the Connection Mode, indicated by alternate red and blue LED flashes on primary earbud and blue LED flashes- once every 5 seconds on the secondary earbud

CONNECTION MODE

Step 3: Turn on the Bluetooth functionality on your phone/media device and scan.
Step 4: Search for ‘Airdrops Joy’ and pair accordingly Congratulations! Your earbuds are connected successfully via Bluetooth rang

Note:

• Pairing Mode: It lasts for § minutes. If the pairing time is missed then you will need to reconnect the ear-buds and follow the above-mentioned procedure
• Airdrops Joy remembers previously connected devices: once switched on, the earbuds automatically reconnect to the previously connected devices in working range.

SINGLE EARBUD USAGE

Step 1: Please note that both the earbuds can be used in mono mode. Use Smart / Manual Power On for switching on the desired earbud
Step 2: The Selected earbud automatically enters the connection mode indicated by rapid red & bike LED flashes.
Step 3 : Turn on Bluetooth on your phone/media device and search for ‘Airdrops Joy” to connect
Notes:

• To switch to Stereo mode, simply take out the other earbud frorn the case. It will automatically power on and pair with the previously selected earbud, hence enabling Stereo usage
  « You cannot return to the previous tracks in Mono(single-earbud) mode

QUICK GLANCE ON FUNCT

CHARGING THE EARBUDS

Step 1: Please insert the earbud; back inside the charging case in correct orientation and close the lid
Step 2: In charging status, the red LED Solid turns on when case lid gets opened. LED stays off when the lid stays closed.
Step 3: Once the earbuds get fully charged, the charging case automatically switches off to save power, and the red LED stays turned off
Note

• Before using the earbuds for the first time, it is recommended to fully charge the earbuds. Also, piease keep the lid of the charging case closed while charging
• To indicate low earbud battery. red LED blinks thrice every 30 seconds

CHARGING THE CASE

Step 1: To charge the case, plug one end of the provided cable into the case and connect the other end to a computer/ wall adapter/ power bank, etc.

REMAINING CASE BATTERY LED INDICATIONS

opened/Closed
More than 20% battery| WHITE LED is solid on for 8 seconds when the Case lid Is opened/closed
Case in charging mode| WHITE LED continuously blinks
Case fully charged| WHITE LED is solid on

CASE LED INDICATION WHEN EARBUDS ARE GETTING CHARGED FROM THE CASE

This is to indicate the earbud getting charged from the case (when case lid gets closed):

• WHITE LED is Solid ON for 8 second: white charging
• WHITE LED is OFF when Earbuds are charged fully

BASIC FUNCTIONS

•  Voice Assistant Triple tap an left CTC to activate default smart voice assistant
• Answer: Single tap the CTC on either earbud to answer an incoming call
• Hang Up / Reject Cail: Double tap the CTC on either earbud to end / reject call
• Play/Pause Music: Single tap either earbud’s CTC to play or pause music
• Next Track: When playing music, double tap the night earbud’s CTC to skip to the next song
• Previous Track. When playing music, double tap the left earbud’s CTC to return to the previous song

Note

• Volume can only be controlled via the media device

VOICE ASSISTANT

Step 1: Triple tap on left CTC to activate default smart voice assistant »
Step 2: The respective voice assistant screen pops  up and you may place your commands at ease
Tips: You may try the following commands,

• What is the weather? + Play a song
• Set a reminder

Note
If the voice assistant doesn’t get triggered, then the functionality has to be first enabled via your media device settings.
ENX™ TECH
Our ENx™ tech algorithm cancels out the background noise so that you can be heard crystal clear via voice calls. One need not activate ENx™ as the mics are equipped with the sari and activated by Deliver your voice without interruptions anywhere – traffic, railway stations, airports, work space; literally anywhere!
SMART POWER OFF
Step 1: After usage, remove both the earbuds from your ears
Step 2: Peace the earbuds back into the charging case in correct orientation and close the lid The earbuds automatically switch off (and enter charging mode).
MANUAL POWER OFF
Step 1: Long touch either CTC for 8 seconds to manually power omen Tel
Step 2 Once the earbuds get turned off. place them back inside the case and close the lid
BEAST™ MODE
Tripe tap the right CTC to switch to Low Latency mode, also known as the BEAST™ Mode. Once switched on, it gets notified via a sound prompt. Tripe tap the left CTC once again, to tum it off and return to standard Music Mode.
Made for the Gamers – By Gamers, BEAST™ Mode reduces the latency significantly and improves the overall gaming experience.

FACTORY RESET

Perform the factory reset in case you feel any difficulty while operating your Airdrops.
NOTE: Before performing reset, clear “Airdrops Joy” from pairing device history by forgetting device
Step 1: Take out the earbuds from the charging case, and long touch the CTC for § seconds on both the earbuds.
Step 2: Place the earbuds inside the Case.
Step 3: Close the Id, wait for § seconds.
Step 4: Take out the earbuds from the charging case and perform a fresh connection.
Note: To complete the factory reset, all of the above steps should be performed.
Congratulations! Your Airdrops Joy has been Reset

SPECIFICATIONS

WARNING

• Please follow the instruction; to operate
• Please don’t use the earbuds in extreme temperatures
• Please don’t use the product near water
• Please keep the product away from heat sources, as the heat may damage it
• Don’t jam the ports such as charger port LED port, etc.
• It is recommended to utilize the product below the maximum volume in order to protect hearing and extend the ear-buds’ service life

Charging norms & Precautionary Guidelines: 

1)  Charger/Brick/Adapter
2)  Cable/Wire| 5V2A
Standard Cable (20 strands 00.10mm diameter/ strand)
Any other accessory can be paired up with the product as long as the specifications are as per above norms.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>