KOHLER K-1122-XGHLA Alcove Heated BubbleMassage Air Bath Owner’s Manual
- June 13, 2024
- Kohler
Table of Contents
KOHLER K-1122-XGHLA Alcove Heated BubbleMassage Air Bath
Product Information
The 60 x 32 alcove Heated BubbleMassageTM air bath and whirlpool, left drain K-1122-XGHLA is a luxurious bath and whirlpool combination designed to provide a warm massage experience. It features air channels that surround and support the body, providing a relaxing and therapeutic experience. The BubbleMassageTM technology offers adjustable massage intensity with 18 levels, allowing you to customize your experience. The whirlpool feature provides hydromassage flow and direction at each jet, further enhancing the therapeutic benefits of the bath. The bath has the same depth as a standard 21 bath, making it comfortable to use. It also simplifies installation in alcove spaces. The material used for the bath is not specified in the given text. The bath comes with a BubbleMassageTM experience that can be enjoyed for 60 minutes before turning off. It also includes an air switch actuator for controlling the whirlpool feature. The installation of the bath requires the use of a K-7271 Brass Slotted Overflow Bath Drain or a K-7272 PVC Slotted Overflow Bath Drain (not included). The bath complies with various codes and standards such as ASME A112.19.7/CSA B45.10, CSA B45.5/IAPMO Z124, ASTM E162, ASTM E662, UL 1795, CSA C22.2 No. 218.2, ADA, and ICC/ANSI A117.1. The bath is available in multiple colors/finishes, including White, Biscuit, Dune, IceTM Grey, ThunderTM Grey, and Black BlackTM. For detailed warranty information, please visit the manufacturer’s website.
Product Usage Instructions
- Ensure that you have the required K-7271 Brass Slotted Overflow Bath Drain or K-7272 PVC Slotted Overflow Bath Drain for installation.
- Measure your actual product for rough-in according to the provided dimensions.
- Install the bath in an alcove space with a left drain.
- If you wish to use the BubbleMassageTM feature, enjoy it for up to 60 minutes before turning it off.
- To activate the whirlpool feature, use the air switch actuator provided.
- Ensure that the hot water supply is at least 70% of the capacity of the bath or greater. Installations may vary.
- Three dedicated circuits are required for the electrical service, protected with Class A Ground-Fault Circuit-Interrupter (GFCI). Install the product according to the provided installation instructions.
- If needed, a remote blower installation kit is available for relocating the blower. Provide access for servicing the blower.
- Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly if applicable.
- The bath is ADA-compliant when installed according to the specific requirements of ADA regulations.
Please note that the given text does not provide complete product usage instructions. It is recommended to refer to the complete user manual or contact the manufacturer for detailed usage instructions.
Features
- 118 airjets release thousands of heated bubbles that surround and support the body in a warm massage
- Automatic and manual purge cycles remove residual water from air channels after use
- Variable-speed blower lets you adjust Heated BubbleMassage™ massage intensity to 18 levels
- Single-speed whirlpool revitalizes sore muscles
- 8 fully adjustable whirlpool jets allow users to customize hydromassage flow and direction at each jet
- Comfort Depth® design offers a convenient 19″ step-over height while retaining the same depth as a standard 21″ bath
- Integral lumbar support
- Slotted overflow allows for deep soaking
- Integral apron
- Integral flange helps prevent water from seeping behind wall and simplifies alcove installation
- Textured bottom surface
- Coordinates with other products in the Archer collection
- Built-in 600W BubbleMassage™ heater warms humidified air before it enters the bath
- Automatic and manual purge cycles remove residual water from air channels after use
Material
- Acrylic
Hydrotherapy
- Whirlpool
Technology
-
Auto-shutoff timer on blower allows users to enjoy Heated
BubbleMassage™ experience for 60 minutes before turning off -
User interface: electronic keypad control for Heated BubbleMassage™; air switch actuator for Whirlpool
Installation
- Left drain
- Alcove
- Remote blower motor installation required (relocation kit is included)
Required Products/Accessories
- K-7271 Brass Slotted Overflow Bath Drain or
- K-7272 PVC Slotted Overflow Bath Drain
Recommended Products/Accessories
Codes/Standards
- ASME A112.19.7/CSA B45.10
- CSA B45.5/IAPMO Z124
- ASTM E162
- ASTM E662
- UL 1795
- CSA C22.2 No. 218.2
- ADA
- ICC/ANSI A117.1
KOHLER® Hydrotherapy Components Five-Year Limited WarrantyKOHLER® Plastic Baths and Shower Bases Lifetime Limited
Warranty
See the website for detailed warranty information. Available Colors/Finishes
Color tiles are intended for reference only.
Color Code Description
- 0: White
- 96: Biscuit
- NY : Dune
- 95: Ice™ Grey
- 58: Thunder™ Grey
- 7: Black Black™
DIMENSIONS
Required Electrical Service
Three dedicated circuits are required, protected with Class A Ground-Fault
Circuit-Interrupter (GFCI). Outside North America, this device may be known as
a Residual Current Device (RCD).
- Pump, Heater: 120 V, 15 A, 60 Hz
- Heater: 120 V, 15 A, 60 Hz
- Blower: 120 V, 15 A, 60 Hz
Technical Information
All product dimensions are nominal.
- Drain location: Left
- Basin area, bottom: 45-1/8″ x 19-11/16″ (1146 mm x 500 mm)
- Basin area, top: 52-3/4″ x 25-5/16″ (1340 mm x 643 mm)
- Weight: 165 lbs (74.8 kg)
- Minimum floor load: 52 lbs/ft² (253.9 kg/m²)
- Water depth: 15″ (381 mm)
- Water capacity: 58 gal (219.6 L)
- Electrical component rating:
- Pump: 120 V, 7 A, 60 Hz
- Heater: 120 V, 5 A, 60 Hz
Notes: Measure your actual product for rough-in details. Install this product according to the installation instructions. The hot water supply should be 70% of the capacity of the bath or greater. Installations will vary. Remote blower installation kit is available for relocating the blower. Provide access for servicing the blower. Do not relocate or alter the PVC tee or coiled flexible tubing connected to the blower. Follow the blower relocation instructions exactly. ADA compliant when installed to the specific requirements of these regulations.
1-800-4KOHLER (1-800-456-4537) Kohler Co. reserves the right to make revisions without notice to product specifications. For the most current Specification Sheet, go to www.kohler.com. 8-25-2023 22:44 – US/CA