nimly Connect Module Touch Pro Electronic Door Lock Installation Guide
- June 13, 2024
- nimly
Table of Contents
Connect Module
Touch Pro Electronic
**Door Lock Installation Guide
**
Connect Module Touch Pro Electronic Door Lock
Necessary components: Connect Module. compatible nimly door lock and Connect Gateway from nimly or other supported smart home vendor
-
Install the module on the circuit board of the inside unit
Do you need to disassemble the lock from your door? Please refer to the installation manual for your door lock, available on our website https://nimly.io/im. -
Insert all batteries into the lock
Make sure the batteries are installed correctly and verify that the lock is operational -
The module will automatically enter pairing-mode for four minutes
Pairing-mode is indicated by slow flashing on the blue and orange LED on the module
Do you need to start pairing mode again? Remove and re-insert the batteries
-
Download our n ly connect app or use your preferred supported smart home application
Proceed by installing the application from either App Store or Google Play and follow the pairing sequence provided in the application
nimly connect Allows you to operate the lock remotely with advanced functions
*Gateway necessary http://qr.nimly.io/r2w683k
Connecting with another supported smart home vendor?
Follow the steps in their app Read more about supported smart home vendors. functions, applications and more on our website https://nimly.io/ -
If you have followed all steps accordingly, your module should now be connected Successful pairing is confirmed when the blinking search light turns off. Test the lock afterwards.
Are you changing smart home solution and need to reset your module? Hold the reset button for up to 15 seconds. release when the LED starts blinking rapidly.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>