Ledbox Company LED Neon Flex Side View Installation Guide
- June 13, 2024
- Ledbox Company
Table of Contents
Neonflex
Installation guide
LED Neon Flex Side View
Important:
- Make sure power is disconnected during installation or maintenance
- Keep cables and the Neonflex protected from sharp objects to prevent damage
- Allign polarity when connecting the Neonflex
- Do not bend or twist the Neonflex otherwise as specified below
- Only cut the Neonflex at the indicated cutting intervals
Bending direction Neonflex.
Minimum bending diameter of the Neonflex.
The Neonflex can be cut to size at the indicated cutting intervals.
When using mounting profiles make sure the neonflex is pushed in from one side.
Tips:
Before powering the system, check if all polarities are aligned.
It’s recommended to install longer lengths with two persons.
Disclaimer
Due to the technical evolution and improvement of our products, the data
provided in this document may be updated on a regular basis, and as such,
confirmation of this information is strongly recommended prior to the order
process. OneEightyOne
is not responsible for any discrepancies in this document following changes in
our products. We reserve the right to make technical changes to our products
and to change information, at its sole discretion, without notice.
OneEightyOne Valschermkade 27 – 28 | 1059CD | Amsterdam
+31 20 8200170 | info@oneeightyone.com |
www.oneeightyone.com
©2021
References
- Domain Names | Web Hosting | Websites | Email | WordPress
- Lightly obsessed with light - OneEightyOne 181
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>