MERIDIAN Indoor Wall Mount Hub Digital Signage Installation Guide
- June 13, 2024
- MERIDIAN
Table of Contents
Indoor Wall Mount Installation
Indoor Wall Mount Installation Guide
Dimension Drawings
Step 1:
Separate the main body from the galvanized wall mount bracket by removing the
5/16” hex bolts used to attach the two parts
There are 18 total hex bolts around the edge of the main body
Step 2: Mount the galvanized wall bracket
to the wall
There are 16 .4” diameter holes on the galvanized wall mount bracket to be
used in attaching it to the wall, with client supplied wall anchoring hardware
Step 3:
Select the desired location for routing electrical wires
Knock out the desired location on either side of the galvanized wall bracket
on the top or bottom
 Step 4:
Install the main body to the galvanized wall mount bracket by bolting the 5/16” hex bolts used to attach the two parts
There are 18 total hex bolts Step 5:
Install the monitor mounting bracket to the chassis
M8 screws included
Step 6: Install the monitor to the
mounting bracket
Connect power and hdmi cables as you install the monitor
MeridianKiosks.com
Help@Mzero.com
910-944-1751 Ext. 2
Corporate Headquarters
312 S. Pine Street,
Aberdeen, NC 28315
+1 910-944-1751 Ext. 2
Help@mzero.com
Meridiankiosks.com
© Meridian Kiosks
312 S Pine Street, Aberdeen, North Carolina, 28315