Topcraft GZB021BR 12-ft x 10-ft Brown Metal Rectangle Screened Gazebo Instruction Manual
- June 13, 2024
- TopCraft
Table of Contents
GZB021BR 12-ft x 10-ft Brown Metal Rectangle Screened Gazebo
Product Information:
- Pole
- Beam
- Corner Roof Bar
- Corner Roof Bar Connector
- Roof Bar
- Corner Roof Solidifying Bar
- Finishing Bar
- Solidfying Bar
- Roof Panel
Product Usage Instructions:
-
Attach Part #B1 to Part #A with 4 Bolts #8.
-
Attach Part #B2 to Part #A with 4 Bolts #6.
-
Attach Part #B to Part #A with 3 Bolts #8.
-
Repeat the above procedures to assemble the other three Part
A.
-
Insert Part #X into Part #C1.
-
Insert Part #C into Part #C1 and secure with 4 Bolts #8.
-
Secure Part #X with 2 Bolts #3.
-
Repeat the above procedures to assemble the other Part #C and
Part #C1. -
Insert Part #X into Part #D1.
-
Insert one side of Part #C2 into Part #D and secure with 4
Bolts #8. -
Insert the other side of Part #C2 into Part #D1 and secure with
4 Bolts #8. -
Secure Part #X with 2 Bolts #3.
-
Repeat the above procedures to assemble the other Part #D and
Part #D1. -
Tighten all the bolts.
-
Assemble the 4 Corner Roof Bars: Connect Part #E1 and Part #E
with 2 Bolts #8. Attach Part #U to Part #E with Bolt #8. Attach
Part #W1 to Part #E with Bolt #8. Repeat the above procedures to
assemble the other three pieces. -
Attach Part #U2 to Part #F/F1 with Bolt #6. Repeat the above
procedures to assemble the other 3 pieces. -
Secure Part #T to Part #Z2, Part #S, and Part #S1. The holes of
Part #Z2, Part #S, and Part #S1 need to be aligned on the same
vertical line. -
Insert Part #Q/Q1 into the hole that is around the edge of Part
Z2.
-
Assemble Roof Panels: Insert Part #P3 into the top roof. Place
Part #H2 on Part #E2, securing with Bolt #8. Repeat these
procedures to assemble the other side. -
Place Part #H1 and Part #H2 on Part #E1; put on Part #Y1 and
secure with Bolt #8. Repeat these procedures to assemble the other
side. -
Insert Roof Panels into the frame
(L1&L&M&N&N1). Repeat these procedures to assemble
the other side. -
Attach Part #G/G1 to the frame, securing with Bolt #6. Repeat
these procedures to assemble the other side. -
Place Part #G and Part #G1 on Part #E; put on Part #Y1 and
secure with Bolt #8. Repeat these procedures to assemble the other
3 corners.
Pole
Beam
Beam
Beam
Beam
Corner Roof Bar
Corner Roof Bar Connector
Roof Bar
Roof Bar
Corner Roof Solidifying Bar
Corner Roof Solidifying Bar
Finishing Bar
Finishing Bar
1
Finishing Bar
Finishing Bar Finishing Bar
Finishing Bar
Finishing Bar
Solidfying Bar
Solidfying Bar
Roof Panel
Roof Panel
Roof Panel
2
Roof Panel
Finishing Bar Finishing Bar Solidfying Bar Roof Panel Roof Panel Roof Panel Roof Panel Roof Panel
3
4
(1) Attach Part #B1 to Part #A with 4 Bolts #8 .
(2) Attach Part #B2 to Part #A with 4 Bolts #6 .
(3) Attach Part #B to
Part #A with 3 Bolts #8.
5
(4) Repeat the above procedures to assemble the other three Part #A.
(1)Insert Part #X into Part #C1.
(2) Insert Part #C into Part #C1 and secure with 4 Bolts #8.
(3) Secure Part #X with 2 Bolts #3.
(4) Repeat the above procedures to assemble
6
the other Part #C and Part #C1.
(1) Insert Part #X into Part #D1.
(3) Insert the other side of Part #C2 into Part #D1 and secure with 4 Bolts
8.
(2) Insert one side of Part #C2 into Part #D and secure with 4 Bolts #8.
(4) Secure Part #X with 2 Bolts #3.
(5) Repeat the above procedures to assemble
7
the other Part #D and Part #D1.
D1/C1
C/D
D1/C1
C/D
C/D
D1/C1
C/D
D1/C1
C/D
D1/C1
C/D
D1/C1
Tighten all the bolts.
Assemble the 4 Corner Roof Bars: (1) Connect Part #E1 and Part #E with 2 Bolts
8.
X4
12
(2) Attach Part #U to Part #E with Bolt #8.
(3) Attach Part #W1 to Part #E with Bolt #8.
(4) Repeat the above procedures to assemble the other three pieces.
U
16
(1) Attach Part #U2 to Part #F/F1 with Bolt #6.
(2) Repeat the above procedures to assemble the other 3 pieces.
W1
Secure Part #T to Part #Z2, Part #S and Part #S1. ATTENTION: The holes of Part
Z2, Part #S and Part #S1 need to be aligned, on the same vertical line.
21
Insert Part #Q/Q1 into the hole that around the edge of Part #Z2.
22
ASSEMBLE ROOF PANELS: 26
(1) Insert Part #P3 into the top roof.
(2) Place Part #H2 on Part #E2, securing with Bolt #8.
28
(3) Repeat these procedures to assemble the another side.
(1) Place Part #H1 and Part #H2 on Part #E1;put on Part #Y1 and secure with Bolt #8.
H2 (2) Place Part #H and Part #H2
H
on Part #E1;put on Part #Y1 and
secure with Bolt #8.
(3) Repeat these procedures to assemble the another side.
29
(1) Insert Roof Panels into the frame (L1&L&M&N&N1).
(2) Repeat these procedures to assemble the another side.
30
(1) Insert Roof Panels into the frame(L1&L&N&N1).
F
F1
L1 L
F1
F
32
(2) Attach Part #G/G1 to the frame,
F/F1
securing with Bolt #6.
(3) Repeat these procedures to assemble the another side.
(1) Place Part #G and Part #G1 on Part #E; put on Part #Y1 and secure with
Bolt #8.
(2) Repeat these procedures to assemble the other 3 corners.
34