Topcraft LGCF1551 8-ft x 6-ft Galvanized Steel Storage Shed Instruction Manual
- June 12, 2024
- TopCraft
Table of Contents
8.2’x 6.2′ TOOL STORAGE SHED
MODEL#: LGCF 1551 ASSEMBLY MANUAL
LGCF1551 8-ft x 6-ft Galvanized Steel Storage Shed
The manual will
assist you during the whole process of assembling.
Make sure you have all the parts & hardware as list 1 and list 2 shown;
prepare the level ground for installation.
Pre-assembly
| 1.Two or more people are required
---|---
| 2.You will need one or more for assembly. stepladders.
| 3. Wearing protective gloves is recommended.
| 4.You may need a safety hat.
| 5.Please use a Phillips screw driver.
| 6.For ease of construction, you may need a drill.
| 7.You may need a safety goggle.
| 8.Do not fully tighten screws prior to complete assembly.
Warning & Attention
- Try to assemble this product on the flat ground, otherwise it is difficult to carry out;
- It would be much easier to assemble the product with three or more people;
- After assembly, please check whether all screws are tightened, to prevent parts from falling apart.
**** Use bolts to secure the frame to the ground to against the strong wind.
| 
---|---
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
| 
