INFUSETEK ISPLab02 Intelligent Syringe Pump Instructions
- June 13, 2024
- INFUSETEK
Table of Contents
Intelligent Syringe Pump
ISPLab02
3 years
warranty
Introduction
The intelligent syringe pump with infusion/withdrawal mode, stainless steel body, and 4.3″ color LCD screen is easy to operate. It can install and fix different types of injectors or syringes in the same time, and it is suitable for transferring micro flow rates with high precision (non-medical).
Features
Online flow rate modification function:
The pump is running, without stopping, adjust the flow rate at any time to
meet complex application.
Colorful LCD display:
Friendly interface, 4.3 inch LCD display every technical parameter in real
time.
Input syringe inner diameter function:
Can choose the injector from the list or input the injector inner diameter
directly.
Two measurement mode for selection:
Infusion volume — Infusion flow rate, Infusion volume — Infusion time.
4 different working modes:
Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion. The parameters
of each working mode saving separately. Each working mode can be changed to
continuous mode by setting repeat parameters.
Alarm function:
The pump will stall and give an alarm when the drive structure of the pump is
blocked.
Interface display
Technical Specifications
Syringe
| Inside Diameter (mm)| Flow Rate(uL/min-mL/min)
---|---|---
ISPLab01/ISPLab02|
ISPLab04/ISPLab12
1mL| 4.70| 0.0174-2.29| 0.0174-2.29
2mL| 9.70| 0.0739-9.755| 0.0739-9.755
5mL| 12.48| 0.1223-16.147| 0.1223-16.147
10mL| 15.89| 0.1983-26.177| 0.1983-26.177
20mL| 20.00| 0.3142-41.469| ⸻
30mL| 22.50| 0.3976-52.484| ⸻
50mL| 28.90| 0.6560-86.588| ⸻
100mL| 32.00| 0.8042-106.154| ⸻
150mL| 40.00| 1.2566-165.871| ⸻
Technical Specifications
| Working mode | Infusion, withdrawal, infusion/withdrawal, withdrawal/infusion |
|---|---|
| Channel number | 2 |
| Syringe size | 10μL-150mL |
| Syringe selection | Syringe size and customized diameter |
| Linear speed range | 1μm/min-132mm/min(Flow rate=Linear speed* syringe inner |
cut area)
Min. linear rate| 1μm/min
Linear force| 8-20kgf, online adjust
Max. stroke| 140mm
Stoke resolution| 0.078μm/μstep
Accuracy| Error ≤±0.3% (Stoke ≥30% of maximum stroke)
Back distance| 0.01-10mm
Stored modes| Can save at most 60 common modes
Display| Industrial grade 4.3”LCD color display
Control method| Touch screen and Mechanical keypad
Power-off memory| Display the previous data parameter after power supply again
Output| OC gate signal output,used to indicate running status and direction
External control| Start/stop signal, withdrawal and infusion signal, active
switch signal: (5-24V)
Start/stop signal, passive switch signal, such as foot pedal switch
Communication interface| RS232/RS485, Modbus protocol(RTU mode)
Power supply| AC100-240V/65W
Condition temperature| 0-40°C
Relative humidity| <80%
IP rate| IP31
External Control Schematic
- Foot pedal connector: Connect with foot pedal switch
- 15 Pin connector ： External input and output
- 9 pin connector ： RS232 and RS485
Dimension Drawing (Unit: mm)
www.infusetek.com
TEL:400-630-8958
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>