TAR RIVER BFM-10 Series Finish Mower User Manual
- June 13, 2024
- TAR RIVER
Table of Contents
BFM-10 Series Finish Mower
Product Information:
The BFM-105 & BFM-106 Finishing Mowers are high-quality
mowers designed for professional use. They are equipped with
various parts and accessories to ensure efficient and effective
mowing.
Key Features:
-
Available in 5′ and 6′ sizes
-
Blade specifications: 505 X 50 X 6 for 5′ mower, 610 X 60 X 6
for 6′ mower -
Includes blade spindles, shafts, keys, dust caps, bolts,
bearing holders, grease nipples, steel sleeves, flat washers, joint
plates, lock washers, nuts, double pulleys, single pulleys,
V-belts, main input pulleys, gearbox rest adjusting bolts, sliding
plates, gearbox safety guards, wheel axles, lock nuts, wheel yokes,
wheel spacers, axle sleeves, lock pins, formed axles, adjusting
spacers
Product Usage Instructions:
1. Before using the finishing mower, ensure that all necessary
parts and accessories are properly installed and secured.
2. Position the mower at the desired cutting height. Use
positions 1-19 for the BFM-105 mower and positions 20-36 for the
BFM-106 mower.
3. To replace the blades, refer to the part numbers and
specifications provided in the manual. Use the appropriate tools to
remove the old blades and install the new ones.
4. Regularly check and maintain the blade spindles, shafts, and
bearings. Lubricate the grease nipples as needed.
5. Adjust the gearbox rest using the adjusting bolt and sliding
plate to ensure proper alignment and operation.
6. Install the gearbox safety guard to protect against debris
and ensure operator safety.
7. Check and adjust the tension of the V-belt using the main
input pulley and belt guard. Replace the V-belt if necessary.
8. Inspect and maintain the wheel axles, wheel yokes, wheel
spacers, and axle sleeves. Ensure that all wheels are properly
secured and aligned.
9. Use the lock pins and formed axles to adjust the cutting
height and angle of the mower deck as needed.
10. Securely attach the deflector and chain rod to prevent grass
clippings from being thrown in unwanted directions.
11. Regularly inspect and tighten all bolts, nuts, washers, and
other fasteners to ensure safe and reliable operation.
12. Follow all safety guidelines and instructions provided in
the operator’s manual to prevent accidents or injuries.
Operator’s Manual
BFM-105 & BFM-106 Finishing Mowers
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
68
20
POSITION 1 2
3
4 5 6 7 8 9 10 11 12 13
14
15
16
17
18
19
PART # LNM1815
FW18
FMB4002
DESCRIPTION Nut M18 X 1.5
Flat Washer
SPECIFICATION 18
Blade
5′ – 505 X 50 X 6
Q’TY 3 3
3
FMB4003
Blade
6′ – 610 X 60 X 6
FM10038 KM080730 FM10040 BM101530 FM10041 GN081S FM10043 B6205-2RS
FW24 FM10044 FM10045
FW10 FW10 LW10 LW10 NM1015 NM1015 FM10046 FM10047
Blade Spindle Shaft Round End Key Dust Cap Bolt Bearing Holder Grease Nipple Steel Sleeve Bearing Flat Washer Joint Plate Joint Plate Flat Washer Flat Washer Lock Washer Lock Washer Nut Nut Double Pulley Double Pulley
8 X 7 X 30
M10 X 1.5 x 30
8 X 1
62052RS 24 5′ 6′ 10 10 10 10
M10 X 1.5 M10 X 1.5
5′ 6′
NM2415
Nut
M24 X 1.5
FM10048
Single Pulley
5″
FM10049
Single pulley
6′
3
3 3 3 17 3 7 3 6 7 2 2 5′ – 28 6′ – 29 5′ – 28 6′ – 29 5′ – 28 6′ – 29 1 1
3 2 2
21
68
22
POSITION
20
21 22 23 24 25 26 27 28 29
30
31
32 33 34 34-1 34-2 35
36
37-A 37-B 37-C 37-D 37-E
PART # FM10051 FM10052 FM10054 FM10056 BM101580 FM10057
FW16 LW16 NM1620 FM10058 FM10060 FM10062 FM10063 BM1620140 FM10102 LNM1620
FM10067 FM10108 FM10066 FM10068 FM10071 FM10070 FM10073
FM10074 FM10075 FM10103 FM10105
DESCRIPTION V-Belt V-Belt
Main Input Pulley Gearbox Rest Adjusting Bolt Sliding Plate Flat Washer Lock
Washer Nut Gearbox Safety Guard PTO PTO
Wheel Axle (Bolt) Wheel
Lock Nut Wheel Yoke Wheel Spacer Axle Sleeve
Lock Pin Formed Axle Formed Axle Adjusting Spacer 1/4″
Adjusting Spacer 1/2″ Adjusting Spacer 3/4″ Adjusting Spacer 1″ Adjusting
Spacer 1 1/2″
SPECIFICATION 5′ – B1575 6′ – B1880 5′ & 6′ 5′ & 6′
M10 X 1.5 X 80
16 16 M16 X 2.0
5′ 6′ M16 X 2.0 X140 210 X 80 M1620
5′ 6′
Optional
Q’TY
1 1 1 1 4 4 4 1 Optional 1 1 4 4
8 4 4
4 4 4 4 4
23
68
24
POSITION 38 39
40
41 42 43
44
45
46
47
48
49
50 51
52
53 54 55 56 57 58
Part # CNM242 CP5X50 FM10077 FM10078 FM10079 FM10080 BM1217540 FM10082 FM10083 BM0812515 FM10085 FM10086 BM061025 FM10088 FM10089 FM10091 FM10092 LNM061 FW08 FM10094 FM10095 FM10096 FM10097 FM10098 FM10099 FW12 LW12
DESCRIPTION
Gearbox Castle Nut Cotter Pin Main Deck Main Deck Hair Pin Pin Bolt Belt Guard
Belt Guard Bolt Chain Chain Bolt Deflector Deflector Chain Rod Chain Rod Lock
Nut Flat Washer Rear Brace Rear Brace Front Brace Brace Upper Hitch Pin Flat
Washer
Lock Washer
SPECIFICATION
Q’TY
M24 X 2.0
1
5 X 50M
1
5′
1
6′
1
6
19 X 60.5MM
2
M12 X 1.75 X 40
8
5′
2
6′
2
M8 X 1.25 X 15
6
5′
24
6′
35
M6 X 1.0 X 25
2
5′
1
6′
1
5′
1
6′
1
M6 X 1.0
2
8
6
5′
2
6′
2
2
1 1
1
12
1
12
1
25
68
26
POSITION 59 60 61
62
63 64 65 66 68 69
NM12175 KM100835
LW18 BM101525 BM101525
LW08 FW12 BM0812512 FW24 BM12175140 FM10101
DESCRIPTION
Nut Gearbox Key Lock Washer
Bolt Bolt Lock Washer Flat Washer Bolt Flat Washer Bolt Blade Spindle Complete
SPECIFICATION
M12 X 1.75 10 X 8 X 35
18 M10 X 1.5 X 25 M10 X 1.5 X 25
8 12 M8 X 1.25 X 12 24 M12 X 1.75 X 140
Q’TY
5 1 3 5′ – 7 6′ – 8 6 4 4 1 1 1
27
28
29
30
31
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>