Schneider Electric R9H13482 Enclosure Surface Modules Instruction Manual
- June 12, 2024
- Schneider Electric
Table of Contents
Schneider Electric R9H13482 Enclosure Surface Modules
This service guide must be kept for future use.
SAFETY INSTRUCTIONS
PLEASE NOTE
- This equipment should be installed, repaired and maintained only by qualified personnel. No responsibility is assumed by Schneider Electric for any consequences arising out of the use of this documentation.
- A qualified person is one who has skills and knowledge related to the construction, installation and operation of electrical equipment and who has received safety training to recognize and avoid the hazards involved.
- Read this guide carefully and examine the equipment to become familiar with its operation before installing it.
- This service guide must be kept for future use.
- All applicable local, regional, and national regulations must be respected when installing, repairing, and maintaining this equipment.
- This device should not be installed if, when unpacking, you observe that it is damaged.
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION OR ARC FLASH
- This equipment must only be installed by a qualified person. This operation must only be carried out after reading all the instructions in this document.
- NEVER work alone.
- Before making the visual inspections, tests or maintenance operations on this equipment, disconnect all electrical power supplies.
- Start off with the principle that all circuits are live until they have been completely powered down, tested and labeled. Pay special attention to the design of the power supply circuit. Take account of all power supply sources, including the possibility of feedback.
- Wear suitable personal protective equipment and respect applicable electrical safety instructions.
- Use a Voltage Tester of the appropriate rating.
- Take account of possible hazards. Carefully inspect the work area to check that no tools or objects could have been left inside the equipment. Failure to follow these instructions will result in death or serious injury.
TOOLS REQUIRED
INSTALLATION INSTRUCTIONS
CUSTOMER SUPPORT
*1 Tested with DIN46228 cable lugs. Performance with other types of cable lugs is not guaranteed.
Schneider Electric Industries SAS
35, rue Joseph Monier
CS 30323
F – 92506 Rueil Malmaison Cedex
PHA6653601-01
© 2022 Schneider Electric – All rights reserved.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>