dekight 20453B Motorized Smart Power Tower Instruction Manual
- June 12, 2024
- dekight
Table of Contents
dekight 20453B Motorized Smart Power Tower
Dear user, Thank you for choosing our product. Please read this manual carefully for safe use! This product uses PIC chip technology for maximum protection, and concealed design and built-in ease of use.
Product Information
Thank you for choosing our Motorized Smart Power Tower. This product is designed with PIC chip technology to provide maximum protection. It features a concealed design and built-in ease of use for your convenience. The Power Tower is suitable for various applications such as office desks, pedestals, conference tables, kitchen worktops, bookshelves, and more.
The Power Tower has several key features:
- Anti-collision function: If the Power Tower collides with any object while moving, it will automatically stop to prevent damage. Simply remove the object and press the button again to resume movement in the same direction.
- Design: This product allows you to create a more perfect and safer home design without the need for extensive modifications to your kitchen or office.
- USB charging: The Power Tower provides 5V charging capabilities for devices such as mobile phones.
- IP20 water resistance: The product conforms to IP20 waterproof design standards, providing protection against water splashes.
Product Usage Instructions
To use the Motorized Smart Power Tower, follow these steps:
- Press the button on the top of the Power Tower (cover) to initiate the upward movement.
- Once you reach the desired height, press the button again to stop the extension socket at any height. The extension socket will automatically stop when the maximum height is reached.
- To lower the Power Tower back into its place after use, press the button on the top of the device again (cover).
Please read the user manual carefully for safe use of the Motorized Smart Power Tower. If the Power Tower encounters any obstruction during movement, make sure to remove the object causing the obstruction before restarting the device.
Fields of application
Suitable for office desks, pedestals, conference tables, kitchen worktops, bookshelves and many other uses.
Use:
Press the button on the top of the product (cover), The product begins to
rise. Once you reach the desired height, press the button again to stop the
extention socket at any height. The extention socket stops automatically when
the maximum height is reached. To lower it back into it’s place after use,
press the button on the top of the device again (cover).
Main features
- Anti-collision function, protection against impeded movement: If the product collides with any other object while moving up or down, the product stops moving. Remove the object that caused the problem and press the button again to restart the device in the same direction as the previous movement.
- Design: The most important benefit of this product is that you can use it to create a more perfect and safer home design anywhere, anytime without the extension of your modern kitchen or office.
- USB charging: Provides 5V charging such as mobile your own phone phones
- IP20 water resistance: the product conforms to IP20 waterproof design
Specification
- Operating voltage 230 V AC (50 Hz)
- Max. amperage 16 A
- Max. load 3500 W
- USB max. charging current max. 3.1 A
- Max diameter 72 mm
- Mounting diameter 60 mm
- Mounting depth 380 mm
- Length when closed 370 mm + 10 mm socket
- Length when open 605 mm + 10 mm socket
- Cable length 1.5 m
- Cable type 3 x 1.5 mm² C19
Installation order
- Saw a hole at the desired area at a 60mm radius with a hole saw. Please pay attention to direct sunlight, water and humid environment when placing the item. Install the hidden hub when it is open! (Before installation, turn on the power and press the button on the top to open it.) Before cutting a hole, make sure the power cord reaches the wall outlet when the hood is open! Otherwise, the power cord may be tense, which may cause operating problems.(During opening, the power cord moves with the distributor. This should be taken into account beforeinstallation!)
- After you’re done with sawing the hole, please place the silicone sealing ring ( if necessary) and place the socket into the hole.
- Rotate the socket to the appropriate direction and twist the retaining ring from the bottom to the top.
Attention: In the event of malfunctioning, please do not disassemble this product under any circumstances as improper assembly or service may result in danger and injury.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>