HUION HS64 6.3 Inch x 4 Inch Graphic Tablet User Manual
- June 12, 2024
- Huion
Table of Contents
HS64 6.3 Inch x 4 Inch Graphic Tablet
User Manual
User Manual
For Windows and Macintosh OS
HS64 6.3 Inch x 4 Inch Graphic Tablet
Precautions
- Please read this manual carefully before using, and keep it well for future reference.
- Before cleaning the tablet please unplug the power cord and wipe with a soft damp cloth, do not use any kind of detergents.
- Don’t expose this product to water or other liquids. Take care to never spill liquids onto the tablet and pen. Exposing this product to water or other liquids may cause product malfunction or electrical shock.
- Do not place the tablet on where is unstable or a height for children reaching easily in order to avoid danger. Prevent children from swallowing the pen nib or side switch. The pen nib, side switch, or other movable parts may accidentally be pulled out if children are biting on them.
- Power off your tablet in locations where/when electronic devices is not allowed. Because the tablet may cause other electronic devices to malfunction in some locations where/when the use of electronic devices is not allowed, such as within an airplane, be sure to turn off the tablet.
- Do not disassemble the tablet and pen. Do not disassemble or otherwise modify the tablet or pen. Such action may cause heat generation, ignition, electronic shock, or other damage, including human injury. Disassembling the product will void your warranty.
- While getting the components replaced, you are supposed to guarantee that the repairman is using the substitute components specified by the manufacturer. Unauthorized component replacement might cause fire, electric shocks or other dangers.
- Do not insert foreign material into the USB port or any other opening of this product. If a metal object or foreign material is inserted into a port or other opening of this product it may cause the product to malfunction or burn out, or cause electronic shock.
Product Overview
1.1 Tablet Introduction
Thanks for choosing HUION® HS64 creative pen tablet. This is a new generation
of professional battery-free drawing tablet, which can greatly improve your
work efficiency of painting and creation, and full of fun. You can freely
painting and writing, depicting different lines and colors, just as the pen
writes on the paper, which brings you a real shock experience.
To give you a better understanding and using of your tablet, please read this
user manual carefully. The user manual only shows the information under
Windows, unless otherwise specified, this information applies to both Windows
and Macintosh systems.
1.2 Product and Accessories
1.2.1 Graphics Tablet 
1.2.2 Packing
List
1.3 Connecting to Computer
1. Connect the tablet to your computer with USB cable.
1.4
Connecting to Android Phone
- Please make sure your phone & pad OS is as following: Android OS 6.0 or later
- For some models, you need to go phone or pad “Settings” then enable “OTG” function.
- Choose the right OTG Adapter from package, which depends on USB port type of your phone, then connect pen tablet to your phone following the illustrations below:
Notes:
- The pen tablet can works without installing any driver into your phone.
- Once connected, the tablet will automatically enter phone mode, in which the pen can only work in the left gray area(102×63.75mm).
- If not recognized the tablet to phone mode, please press the button ① for 3 seconds to enter phone mode.
- Please note that the press keys of pen tablet and digital pen are not supported in phone mode.
1.5 Driver Installation
1.5.1 OS Support
Windows 7 or later，macOS 10.12 or later
1.5.2 Install Driver
Please download the driver from our website:
www.huion.com/download
After finishing installation, you can find the driver icon in the system tray
area, which means the driver was installed successfully; when you connect the
tablet to computer, the icon will change to color , which means the driver has
already recognized the tablet and you can start using it now.
Notice ：
- Before installing, you need to uninstall other driver of similar products, including the old driver of this product.
- Before installing, please close all graphics software and anti-virus software to avoid unnecessary mistake.
1.5.3 How to Install and Uninstall the Drivers on Linux Devices
Notice:
- Please remember to close the command window and reboot your Linux device after installing the driver, or the driver will not be useful. After rebooting the device, you can access the system main menu to find the Huion Tablet driver and then open it to finish some settings.
- If you are running Linux operating system on VMware, you must use the VMware Workstation Pro version. And the Play version of VMware Workstation doesn’t support the Huion Tablet driver.
- Some versions of the Ubutun operating system don’t support using more than one monitor simultaneously. And we recommend you upgrade your system to 20.04LTS or later if you want to use a Huion painting device on multiple display screens simultaneously smoothly.
Huion Tablet Driver installation packages in 2 different formats are available for Linux devices:
- tar.xz (file format)
- deb (file format)
Here are the step-by-step instructions for installing the driver packages in
different file formats respectively:
1.Instructions for installing the driver package file in tar.xz format.
Linux operating systems supported: Ubuntu
Steps to Install:
- Extract the contents of the driver file, huiontablet_XXXX.tar.xz, into a folder.
- Open the command window in the folder.
- Input the following command: “sudo sh install.sh”, and press the enter key on the keyboard to make your Linux device execute it.
- Enter the user password to complete the installation.
- Please reboot your Linux device to run the driver, or the driver will not be useful.
Steps to Uninstall:
- Open the command window in the folder of the driver.
- Input the following command in the command window: “sudo sh uninstall.sh”, and press the enter key on the keyboard to make your Linux device execute it.
- Enter the user password to complete the uninstallation.
2.Instructions for installing the driver package file in deb format.
Linux operating systems supported: Ubuntu
Steps to Install:
- Open the folder and double-click the driver file in deb format to enter the system default interface of installing the driver on the application store, then click to install.
- Enter the user password to complete the installation.
- Please reboot your Linux device to run the driver, or the driver will not be useful.
Tips: Please ensure that your Linux device has been connected to the internet
when installing the driver, or the installation will fail when entering the
application store interface.
Steps to Uninstall:
- Enter the interface of the installed applications on the system’s built-in application store.
- Find the driver and click to uninstall it.
Tips: If you can’t access the system’s built-in application store, you can search out the driver file, huiontablet_xxx.deb, then double-click it to enter the installation interface, and click the remove button to uninstall it.
1.6 Pen Nib Replacement
The nib will be wear off after using for a long time, then you need to replace
a new nib.
- Use the pen nib clip to pull the old nib straight out of the pen.
- Insert a new pen nib into the stylus pen and push the nib until it stops.
Product Basic Operation
2.1 Using The Pen
2.1.1 Hold the pen
Hold the pen as you hold a normal pen or pencil. Adjust your grip so that you
can toggle the side switch easily with your thumb or forefinger. Be careful
not to accidentally press the switch while drawing or positioning with the
pen. Notice：When not in use, place the pen in the pen case or on the desk.
Do not place the pen on the surface of screen, which may interfere with the
use of other screen cursor positioning equipment, may also cause your computer
can not enter the sleep mode.
2.1.2 Position the cursor
Move the pen slightly above the active area without touching the screen
surface, the cursor will move to the new position accordingly.
Press the pen tip on the screen to make a selection. Tap the screen once with
the pen tip, or touch it to the screen with enough pressure to register a
click.
2.1.3 Click
Use the pen tip to tap once on the screen to register a click. Tap to
highlight or select an item on the screen and double-click to open it. 
2.1.4 Move
Select the object, then slide the pen tip across the screen to move it.
2.1.5 Use the side buttons
The buttonson the pen can be set to two different customizable functions.
You can use the buttons whenever the pen tip is within 10mm of the tablet
active area.
You do not have to touch the pen tip to the tablet in order to use the
switch.
Function Setting
3.1 Device Connection Prompt
- Device disconnected: The computer does not recognize the tablet.
- Device connected: The computer has recognized the tablet.
3.2 Working Area Setting
3.2.1 Using Multiple Monitors
Select the Working Area tab to define the relationship between pen movement on
the tablet and cursor movement on the monitor screen.
By default the entire active area of tablet maps to the entire monitor. If
more than one monitor is in use and you are in extended mode, you need to
choose the related monitor on the driver interface which you are going to map
to.
If your monitors are in mirror mode (All monitors display the same content),
the tablet maps to the entire space on each monitor and the screen cursor is
displayed on each monitor simultaneously. 
3.2.2 Working Area
Setting
Define the tablet area that will be mapped to the screen area.
- Full Area: the entire active area of the tablet. This is the default setting.
- Customized Area: 1.> Enter coordinate values. or2>. Drag the corners of the foreground graphic to select the screen area.
3.2.3 Rotate Working Area
By changing the direction of the tablet to adapt to the left and right hand
operation.
You can rotate the tablet by 0°,90°,180° or 270°.
3.3 Press Keys
Function Setting
Default Setting：Place the cursor on the press key or click the press key to
find the default values.
Customized Setting：Select the function to be achieved on the pop-up dialog
box, then click APPLY or OK to take effect.
Enable/Disable Press Keys: Check/Uncheck”Enable Press Keys” 
3.4 Pen Buttons Function Setting
Select the function to be achieved on the pop-up dialog box, then click APPLY
or OK to take effect. 
3.5 Pressure Sensitivity Setting
The pressure sensitivity will be changed by dragging the slider up and down,
the smaller the value, the more pressure sensitive. 
3.6 Pen Pressure
Testing
Click “start pressure test”, you can gradually apply pressure to the stylus on
the screen to test the pressure level. Click “Clear” button to clear all the
ink. 
3.7 Enable the Windows Ink feature
Microsoft Windows provides extensive support for pen input. Pen features are
supported in such as Microsoft Office、Windows Journal、Adobe Photoshop CC、
SketchBook 6 and so on.
3.8 Data Export and Import
The driver supports exporting and importing your custom configuration data of
the product, which is convenient for you to use different software and avoid
the trouble of repeated settings.
Specifications
Creative Tablet
Model| HS64
Touch Technology| Battery-free Electromagnetic Resonance
Working Area| 160 x 102mm(6.3 x 4in)
Dimension| 200 x 166 x 8mm
Net Weight| 258g
Touch Resolution| 5080LPI
Report Rate| 266PPS
Pen Sensing Height| 10mm
Interface| Micro USB
Press Keys| 4 Customized Press Keys
OS Support| Windows 7 or later, macOS 10.12 or later
Digital Pen
Model| PW100
Dimension| 163 x Φ14.5 mm
Weight| 13 g
Pressure| 8192 Levels
Accuracy| ±0.3mm
Trouble Shooting
5.1 Possible Breakdowns Related to TABLET
| Abnormal Phenomena | Possible Solutions |
|---|
There is no pressure in the
graphics software but the
cursor moves| You may have installed other tablet drivers or opened the
drawing software when installing the driver. Please uninstall all drivers and
close the drawing software, then reinstall the Huion driver. It’s better to
restart your computer after finishing the installation.’
The pen does not work| 1. Make sure you are using the pen that originally
came with your tablet.
2. Make sure you installed the driver correctly.
Press Keys does not work| 1. Make sure the Press Keys function were enabled
in the driver.
2. Make sure you have correctly defined the Press Keys.
3. Check if the press lock switch is on the unlock position.
The computer can’t enter sleep mode| When you are not using the tablet, please
do not put the pen on the tablet surface, which will keep the computer awake.
The side button of the pen doesn’t work| When pressing the side button, please
make sure that the nib didn’t touch the tablet surface and the distance
between the nib and surface is within 10mm.
5.2 Possible Breakdowns Related to SYSTEM
| Abnormal Phenomena | Possible Solutions |
|---|---|
| The computer can’t recognize the tablet or the wireless receiver | Make sure |
the USB port is functional, if not, please change to another USB port.
After-service Contact
SHENZHEN HUION ANIMATION TECHNOLOGY CO.,LTD.
Building 28, Quarter 4, HuaiDeCuiGang Industrial Park, Fuyong Street, Bao’an
District, Shenzhen, 518106, China
Note: Information in this manual is subject to change without further notice.
For more information, please contact us with our email:
service@huion.com Or go to our website
(www.huion.com) to get the latest driver and user
manual.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>