CIRCONTROL WallBox eHome Charging Station for Electric Vehicles Owner’s Manual
- June 12, 2024
- CIRCONTROL
Table of Contents
WallBox eHome
Charging Station for Electric Vehicles Cir
Car Life
Intelligent charging Car solutions for electric vehicles
Application
Designed to be installed (both indoor and outdoor) at private houses, communal blocks, companies and other places where user authentication is not a requirement.
Concept Design
Taking into account that many times a domestic charger is considered an
appliance, a nice design and a small size are key attributes that are to be
contemplated.
Furthermore WallBox eHome series offers other attributes such as low-cost,
robustness, and user-friendly operation.
Product highlights
- Compatible with BeON sensor (accessory), when combined with eHome is able to dynamically adjust the electric vehicle’s consumption according to the available power of the installation, avoiding the risk of blackout and/or having to upgrade the existing installation (resulting on a lower initial investment)
- The frontal LED bar not only informs the user about the charger status (e.g. operative, faulty…) but also EV charging status; charging (dynamic blue light) vs charged (static blue light)
- Its frontal key-locked door with electrical protections (optional) not only provides an easy access in case the protection has tripped but protects the user against electrical shock. It can also be used asa user authentication method (using the protection as a ON/OFF switch)
- The charger’s housing is made of ABS plastic which is both robust and UV resistant, providing protection against both mechanical stress and severe environmental conditions (which increases the charger lifespan and avoiding its replacement in just a few years)
- Its well-thought-out shape allows the cable to be rolled up and keep it tidy and unbroken while the charger is not being used
- Simple user operation by its Plug ‘n’ Charge mode that avoids the user obligation of authentication by means of an RFID card, phone or equivalent method
- This series also includes a selector switch that facilitates the setup of the charger maximum output current (reducing installation time and cost)
- Remote charging activation is also offered by means of an ON/OFF external input signal (e.g. timer)
- WallBox eHome series provides a reserved space in case you want to have your own brand on it
General Specifications
Enclosure rating | IK10 / IP54 |
---|---|
Enclosure material | ABS-PCV0 |
Operating temperature | -5 °C to +45 ºC |
Ambient temperature storage | -20 ºC to +60 ºC |
Operating humidity | 5 % to 95 % Non-condensing |
Light beacon | RGB colour indicator bar |
Current setup | Onboard dipswitch |
Dimensions (D x W x H) | 115mm x 180mm x 315mm |
Weight | 4 Kg |
Cable length | 5 meters |
External input | Remote charging activation |
Optional devices
Meter| Active Energy
Class 1 (IEC 62053-21)
---|---
Low temperature kit| -30 ºC to +45 ºC
Safety protection| RCD Type A / B (30mA)
Power limit control| BeON sensor
Cable roll-up| Metallic holder
Models Specifications
Model | eHome T1C16 | eHome T1C32 | eHome T2C16 | eHome T2C32 |
---|---|---|---|---|
AC power supply | 1P + N + PE | 1P + N + PE | 1P + N + PE | 1P + N + PE |
AC voltage | 230 VAC +/-10% | 230 VAC +/-10% | 230 VAC +/-10% | 230 VAC +/-10% |
Maximum current | 16 A | 32 A | 16 A | 32 A |
Maximum power | 3,7 kW | 7,4 kW | 3,7 kW | 7,4 kW |
Connector | Type 1 Cable | Type 1 Cable | Type 2 Cable | Type 2 Cable |
eHome BeON Compatible
Intelligent sensor
eHome BeON takes a new step in domestic EV charging allowing you to charge
your vehicle while using your appliances
This intelligent sensor, easily added to the usual protection panel at home,
dynamically adjusts electric vehicle’s consumption if the house system is
about to be overloaded.
Circontrol S.A.
C/ Innovació, 3. Industrial Park Can Mitjans,
08232 Viladecavalls (Barcelona)
Telf. +34 937 362 940
Fax +34 937 362 941
circontrol@circontrol.com
www.circontrol.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>