RODE MICROPHONE SmartLav+ Lavalier Condenser Microphone User Guide
- June 4, 2024
- RODE MICROPHONE
Table of Contents
RODE MICROPHONE SmartLav+ Lavalier Condenser Microphone
RØDE Rec
Die iPhone- und iPad-App für Aufnahmen in Broadcast-Qualität
Remember to register for your twelve month warranty!
Scan the QR code to register now, or visit
warranty.rodemic.com/smartlav
Parts Guide
Microphone and cord
-
Removable Pop shield
-
Microphone capsule
-
TRRS connector
Clothing clip mount -
Lapel clip
-
Microphone mounting clip
-
Cable management clip
RØDE SOUNDBOOTH
now for Broadcast mics
Hear and compare RØDE microphones at
www.rodemic.com/soundbooth or on your
iPad
How to use the mount
- Insert the mic capsule into the wire loop
- Loosely loop the cord back up and through the inside of the clip
- Loop the cord back down and secure it in the cable management clip
This arrangement helps to minimise handling and mechanical noise and also minimises cable strain.
Mounting mic on clothing
Attach the mic to lapel or clothing, about 15-20cm/6 inches from face.
Pro tip : Tape a loose loop in the mic cord on the inside of clothing.
This gives you added strain relief and isolation from unwanted noise.
Mic tips
- Attach the smartLav+TM upside down to reduce excessive breath noises and tonal inconsistencies due to head movements
- It is safest to use the windshield at all times to avoid plosives and wind noise, even when recording inside.
- smartLav+TM is compatible with a range of phones, laptop computers and other audio devices.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>