Graphite Titanium BGT4093UZ Professional Straightener User Manual

: June 12, 2024
: Graphite Titanium

Table of Contents

IMPORTANT SAFETY INSTRUCTIONS
SAFETY INSTRUCTIONS
OPERATING INSTRUCTIONS
USER MAINTENANCE
Read User Manual Online (PDF format)
Download This Manual (PDF format)

Graphite Titanium BGT4093UZ Professional Straightener User Manual

IMPORTANT SAFETY INSTRUCTIONS

When using electrical appliances, especially when children and pets are present, take basic safety precautions, including the following:

KEEP OUT OF REACH OF CHILDREN! READ ALL INSTRUCTIONS BEFORE USING. KEEP AWAY FROM WATER!

DANGER – As with most electrical appliances, parts are electrically live even when the switch is off. To reduce the risk of death by electric shock:

Always unplug appliance immediately after using.
Do not use while bathing or in the shower.
Do not place or store appliance where it can fall or be pulled into a tub or sink.
Do not place in, or drop into, water or any other liquid.
If an appliance falls into water, unplug it immediately.Do notreach into the water.

WARNING – To reduce the risk of burns, electrocution, fire, or injury to persons:

This appliance should never be left unattended when plugged in.
Do not pull, twist, or wrap line cord around appliance.
This appliance should not be used by,on,or near children or individuals with certain disabilities.
Use this appliance only for its intended use, as described in this manual. Do not use attachments not recommended by the manufacturer. Do not use an extension cord to operate appliance.
Never operate this appliance if it has a damaged cord or plug, if it is not working properly, if it has been dropped or damaged, or dropped into water. Return the appliance to an authorized service center for examination and repair.
Keep the cord away fromheated surfaces.
Never use while sleeping.
Never drop or insert any object into any opening.
Do not use outdoors or operate where aerosol (spray) products are being used or where oxygen is being administered.
Do not use an extension cord with this appliance.
This appliance is hot when in use. Do not let heated surfaces touch eyes or skin.
Never block the air openings of the appliance or place it on a soft surface, such as a bed or couch, where the air openings may be blocked. Keep the air openings free of lint, hair and the like.
Do not place the appliance on any surface while it is operating.
Do not touch hot surfaces of the appliance; use handles or knobs.
Do not use this appliance near bathtubs, showers, toilets or any other recipient containing water.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
Before plugging in, read the information about dual voltage contained in the “DUAL VOLTAGE” section of this manual.

SAFETY INSTRUCTIONS

This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
Children should be supervised to ensure that they do not play with the appliance.
Burn Hazard. Keep appliance out of reach from young children, particularly during use and cool down.

OPERATING INSTRUCTIONS

This appliance is intended for professional use. Use on Alternating Current (50-60Hz) only. Standard appliances are designed to operate at 120-240V~.
DUAL VOLTAGE
This flat iron has dual voltage. It will automatically adjust to the proper voltage. Use an adapter plug with correct configuration prior to use in outlet.
STRAIGHTENING BASICS

Plug the straightening iron into a standard electrical outlet (120-240V~). It is not necessary to touch the iron with your hand to judge readiness.
Use the +/- temperature controls to select the setting for your hair type. You can use the chart outlined below as a reference. The iron will heat up very quickly.
TEMPERATURE SETTINGS| HAIR TYPE
---|---
300°F (150°C)| Fragile, very fine hair
340°F (170°C)| Thin, easy-to-straighten hair
375°F (190°C)| Normal textured hair
410°F (210°C)| Wavy or curly hair
450°F (232°C)| Coarse, very thick
Section dry hair evenly, and comb each section. Position the iron on the hair as far up as you want hair to be straightened, being careful not to let the iron touch the scalp. Close the iron with the hair between the two plates and gently pull the iron down to the end of the section of hair you are straightening. Repeat this process several times, if necessary. Let the hair cool before combing.

STYLING TIPS USING STRAIGHTENER
For short, spiky looks use gel or spray and hold the sections up and away from the head while you straighten.
For smoothing and taming curly hair, or creating a stylish, smooth bob, use the straightener just on the ends, leaving the hair wavy at the roots for lift and body. For this type of effect,\ keep the straightener moving while following the shape of your hairstyle.

GRAPHITE + TITANIUM

Graphite’s extremely smooth surface delivers outstanding glide, reducing friction on the hair and making styling effortless.
Graphite + Titanium’s heat conductivity accelerates heat transfer to help maintain even, stable temperatures, and excellent heat recovery for super-efficient styling results.
Graphite + Titanium’s strength delivers a styling tool that will stand up to the rigors of daily salon use, day-in day-out.

GET TO KNOW YOUR PROFESSIONAL STRAIGHTENER
Model BGT4093UZ – 1½”

NOTICE
THIS PRODUCT IS EQUIPPED WITH AN INSTANT HEAT CIRCUITRY. DO NOT LEAVE PRODUCT ON OR PLUGGED IN WHILE NOT IN USE. UNIT WILL BURN OUT IF POWER IS KEPT ON FOR AN EXTENDED PERIOD OF TIME. WARRANTY WILL BE VOIDED. TURN UNIT OFF AND UNPLUG WHEN NOT IN USE.

For additional protection, the installation of a residual current device (RCD) having a nominal residual operating current not exceeding 30 mA is recommended in the electrical circuit feeding the bath. Ask your installer for advice.

USER MAINTENANCE

Your iron is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, let it cool and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and return it for repair to an authorized service representative only. No repairs should be attempted by the consumer.

CAUTION
NEVER allow the power supply cord to be pulled or twisted. Never wrap the cord around the unit. Damage will occur at the high flex point of entry into the unit, causing it to rupture and short. Inspect the cord frequently for damage. Stop use immediately if damage is visible or if unit stops or operates intermittently.

STORAGE
When not in use, your appliance is easy to store. Allow unit to cool, then simply put back in the box, and store out of reach of children in a safe, dry location. Do not jerk or strain cord at plug connections.

WARNING:
IF YOU THINK THE POWER IS OFF WHEN THE SWITCH IS OFF, YOU’RE WRONG.

KEEP AWAY FROM WATER

Everyone knows that electricity and water are a dangerous combination, but did you know that an electrical appliance is still electrically live even if the switch is off? If the plug is in, the power is on. So when you are not using your appliances, keep them unplugged.