Mooye HB-B10KW1 SoyMilk Maker Instruction Manual

: June 12, 2024
: Mooye

Table of Contents

HB-B10KW1 SoyMilk Maker
Operating Instructions
USAGE AND PROCESS
Menu Function Instruction (for reference only)
MAINTENANCE
SAFETY PRECAUTIONS
Malfunction Analysis
Documents / Resources
- Read User Manual Online (PDF format)
- Download This Manual (PDF format)

SoyMilk Maker
HB-B1OKW1 Mooye HB B10KW1 SoyMilk Maker

HB-B10KW1 SoyMilk Maker

Mooye HB B10KW1 SoyMilk Maker - Figure IMPORTANT SAFEGUARDS
Thank you for purchasing the Soymilk Maker. Please read this manual carefully before using it. After reading, please store it carefully for future reference.

Model & Specification

Product Model	HB-B1OKW1
Capacity	1.0L
The rated voltage	120V/60HZ
Heating Power	800W

Operating Instructions

Mooye HB B10KW1 SoyMilk Maker - Control Panel

NOTE CONTENT

When using electrical appliances, basic safety precautions should
always be followed, including the following:

Read all instructions carefully.
To avoid the risk of electric shock, do not put the appliance in water or liquid.
The appliance is not suitable for people with physical disabilities, and children should use it under supervision.
Turn off the appliance and unplug it before use, avoid pulling the power cord.
No contact with moving parts, no breach of the safety interlock mechanism.
Operate when the warning light is flashing, avoid contact with the blade or moving parts.
If the appliance is damaged or malfunctions, send it to an authorized service facility for repair.
It is not recommended to use non-original accessories to avoid injury.
Do not use electrical appliances outdoors.
Prevent the power cord from hanging over the edge of the table or counter.
Take care that hands and utensils do not touch the container while stirring, and the lid must remain in place when using a tamper.
Handle sharp blades with care.
Make sure the jar is properly seated before installing the cutter assembly.
Always operate the blender with the lid in place.
When mixing hot liquids or using heat mode, remove the centerpiece in the lid.
When mixing hot liquids or using heat mode, open or remove the non-pour lid and close the rim opening for pouring.
When mixing hot liquids or using heat mode, open or remove the cap on the pour spout.
Unplug when not in use, before assembly, disassembly, or cleaning. A blinking light (or other indication) indicates that the device is ready for use. Avoid touching the touch screen.
For home use only.
Unplug before assembling, removing parts, or cleaning.
Please read the instruction manual before use.
Sharp blades – always use a food pusher knife.
Do not immerse in water.
Do not touch surfaces that may burn you. Use the handle or knob provided.
Do not let the power cord hang over the edge of the table or counter and avoid contact with hot surfaces.
Do not place on or near a stove or oven, or place in heated containers.
Allow the appliance to cool down before assembling or removing parts and before cleaning the appliance.
Excessive pressure inside the container may cause burns. Do not use closed containers in heat mode.
To prevent electric shock, do not immerse the power cord, plug, or portable equipment in water or other liquids.
Removing the lid during brewing may result in burns.
CAUTION: Do not operate without this cover installed. When mixing hot liquids, make sure the vent cap is in place.
Provide short power cords to reduce the risk of entanglement or tripping.
If you need to use a long detachable power cord or extension cord, please use it carefully.
If using a longer detachable power cord or extension cord:

Make sure that the marked electrical rating of the power cord or extension cord is at least the same as the electrical rating of the device. Here is a condensed treatment of the regulations:
If the equipment needs to be grounded, use a 3-core extension cord with grounding.
Avoid hanging long power cords until children can pull or trip over them.
Use extreme caution when moving equipment containing hot oil or other hot liquids.
Do not use the device for any purpose other than its intended use.
Connect the plug to the device, then plug the power cord into a wall outlet. To disconnect, turn the control switch to the “OFF” position and remove the plug.

SAVE THESE INSTRUCTIONS

Operating Instructions
Power-on operation: After the machine is powered on, there is a sound, and all the lights flash, the function indicator light is on, and the machine enters the standby state and is ready to work.
Introduction of main function keys:

“Menu/Delay Start” button: Select a different function for the “Menu’, then press the “Start/Cancel” button. The function program will run automatically and start working. Press and hold the “menu” for 3 seconds to enter the appointment time selection, the default is 8 hours. Press once to add for 1 hour and leave for up to 12 hours.
“Start/Cancel” button: When the device is on working, just press the “Start/Cancel” button once to stop or start the program.

Juice:

Fruit should not exceed 400 grams:;
Water should not exceed the maximum water level;
Press the “Menu” button to select “Juice” mode (The indicator light of the juice will be on);
Press the “Start/Cancel” button to start work (During the program operation, the indicator light will be on. After the function is over, there will be ten beeps.);
The total working time of juice is about 3 minutes.

Soymilk:

Beans about 60g:
Water should not exceed the maximum water level;
Press the “Menu” button to select “Soymilk” mode (The indicator light of the Soymilk will be on);
Press the “Start/Cancel” button to start work (During the program operation, the indicator light will be on. After the function is over, it will enter the automatic heat preservation (60°C) for 2 hours, and it will end with ten beeps after the heat preservation is over.):
The total working time of Soymilk is about 35 minutes.

Nut Milk:

Nuts such as peanuts and almonds do not exceed 60 grams;
Milk should not exceed the maximum water level;
Press the “Menu” button to select “Nut Milk” mode, (The indicator light of the Nut Milk will be on);
Press the “Start/Cancel” button to start work(During the program work, the indicator light will be on. After the function is over, there will be ten beeps. ):
The total working time of Nut Milk is about 8 minutes.

Milk Shake:

Fruit(not iced) should not exceed 400 grams;
Milk should not exceed the maximum water level;
Press the “Menu” button to select “Milk Shake” mode (The indicator light of the Milk Shake will be on);
Press the “Start/Cancel” button to start work (During the program work, the indicator light will be on. After the function is over, there will be ten beeps. ):
The total working time of Milk Shake is about 3 minutes.

Boil Water:

Water should not exceed the maximum water level;
Press the “Menu” button to select “Boil Water” mode (The indicator light of the Boil Water will be on);
Press the “Start/Cancel” button to start work (During the program operation, the indicator light will be on. After the function is over, it will enter the automatic heat preservation (60°C) for 2 hours, and it will end with ten beeps after the heat preservation is over.);
The total working time of Boil Water is about 10 minutes.

Oat Milk:

Oat about 60g;
Milk should not exceed the maximum water level;
Press the “Menu” button to select “Oat milk” mode, (The indicator light of the Oat milk will be on);
Press the “Start/Cancel” button to start work(During the program work, the indicator light will be on. After the function is over, there will be ten beeps. );
The total working time of Oat Milk is about 2 minutes.

Rice paste:

Rice about 60g;
Water should not exceed the maximum water level;
Press the “Menu” button to select “Rice Paste” mode, (The indicator light of the Rice Paste will be on);
Press the “Start/Cancel” button to start work(During the program operation, the indicator light will be on. After the function is over,
it will enter the automatic heat preservation (60°C) for 2 hours, and it will end with ten beeps after the heat preservation is over.);
The total working time of Rice paste is about 23 minutes.

Clean:

Water should not exceed the maximum water level;
Press the “Menu” button to select “Clean” mode(The indicator light of the Clean will be on);
Press the “Start/Cancel” button to start work (During the program work, the indicator light will be on. After the function is over, there will be ten beeps. );
The total working time of Clean is about 11 minutes.

USAGE AND PROCESS

1. Prepare the ingredients according to the recipe and put them into the jar.| 2. Add water or milk should not exceed the maximum water level.
---|---
3. Close the cover in position.| 4. Switch on the power and enter standby mode.
5. Press the “Menu” button to choose function, and then press the “Start/Cancel” button, it will work automatically.| 6. Open the lid and add seasoning after the function is complete.
7. Turn off the power, remove the cover, pour the juice into glass, and enjoy it.| 8. Close the cover in position, press the “Menu” button to choose “Clean” function, and then press the “Start/-Cancel” button, it will work for high temperature cleaning automatically.

Note: For better taste, it is recommended to filter out the residue before drinking.
Juice

Put about 400 grams of watermelon, mango, orange, and other fruits (please remove the peel and seeds) into the jar.
Add water, do not exceed the maximum water level.
Put the lid on the blender.
Turn on the power
Touch the function key to select the juice function, and then press “Start/Cancel”.
After 3 minutes, the stirring is complete.

Soymilk

Oatmeal peanut soy milk: Put 40 grams of soybeans, 10 grams of peanuts, and 10 grams of oats into a jar. Almond soy milk: Put 40 grams of soybeans and 20 grams of almonds into a jar. Cranberry Rose Soy Milk : Put 40 grams of soybeans, 3 dried cranberries, and 1 dried rose into a jar. 2) Add water, do not exceed the maximum water level. 3) Put the lid on the blender. 4) Turn on the power. 5) Touch the function key to select the function of the soybean milk machine, and then press “Start/Cancel”. 6) After 35 minutes, finish cooking.

Nutmilk

Add nuts, do not exceed 60 grams.
Add milk, not exceeding the maximum nor lower than the minimum water level.
Put the lid on the blender.
Turn on the power.
Touch the function key to select the nut milk function, and then press “Start/Cancel”.
After 8 minutes, finish cooking.

Milk Shake

Do not add more than 400g of fruit.
Add milk, not exceeding the maximum nor lower than the minimum water level.
Put the lid on the blender.
Turn on the power.
Touch the function key to select the milkshake function, and then press “Start/Cancel”.
After 3 minutes, the stirring is complete.

Boil Water

Add water, not exceeding the maximum nor lower than the minimum water level.
Put the lid on the blender.
Turn on the power.
Touch the function key to select the water function, and then press “Start/Cancel”.
After 10 minutes, finish cooking.

Oat Milk

Add instant oats, no more than 60 grams.
Add milk, not exceeding the maximum nor lower than the minimum water level.
Put the lid on the blender.
Turn on the power.
Touch the function button, select the oat milk function, and then press “Start/Cancel”.
After 2 minutes, the stirring is completed.

Rice paste

Sesame paste: put black sesame 20g, sticky rice 20g, peanut 20g into the jar. Pumpkin paste: put pumpkin slices 40g, millet 15g, 2 red dates(stoned) into the jar. Nutrition rice paste: black beans 10g, chopped walnut 5g. sesame 59, barley 59,1 red date (stoned), peanut 5g, rice 20g into the jar. 2) Add water and do not exceed the maximum water level. 3) Put the lid on the blender. Mooye HB B10KW1 SoyMilk Maker - Rice Paste
5 4) Turn on the power. 5) Touch the key of the function to choose the paste function, and then press the“Start/Cancel” 6) After 23 minutes, finish cooking.

Notice

Do not add excessive ingredients (especially the high content of rice, starch, etc., the total amount does not exceed 60g)
Do not heat for the second time to avoid paste.
When the machine is running, it is not allowed to open the cover to put some seasoning like sugar/ salt. All of them it can do after finishing cooking.

Clean

Add water and do not exceed the maximum water level.
Put the lid on the blender.
Turn on the power.
Touch the key of the function to choose a clean function, and then Press the “Start/Cancel”.
After 11 minutes, it will finish the clean function, and automatically turn off.

Notice:
With the soymilk/paste function, which some food is not easy to roll, it is easy to cause paste on the bottom.

According to different functions, choose different weights of food. Then choose a different function using, it is a good way to protect the paste on the bottom.
For the hot drink function using, first please do not add some sugar or composition of sugar.
After finish cooking, you can add some seasoning inside. If needed, you can choose Juice / Clean mode for mixing.

Tips for non-burnt:

Use “paste” and other preset programs with the heating function.
When you put some food in the jar, please put some food that is not easy to paste on the bottom, then put some food such as pump-kin /sesame/potato/yam and so on which is more easy paste on the surface of the jar.
Before using the soymilk/paste function, it is better to brush some oil on the jar bottom.

Notice:

Different requirement has a different function. You need to choose the correction function you want. Otherwise, it will affect the taste.More seriously, it will overflow or burnt.
There is a detection signal inside the body, do not remove the cover lid during working, otherwise it will not work properly. It is not allowed to take up the cover, or it will hurt.

MAINTENANCE

Pull out the plug before cleaning.
Be careful of the sharp blade when cleaning.
Do not wipe the machine with chemicals, like alcohol.
Do not directly wash the machine.
Soak it with hot water when the residue is hard to clean, and brush in the same direction with a sponge, then wash with clear water.
Do not place the product at a high place or under pressure, keep away from fire and heat sources.
Cool the jar before cleaning.
Use a dry towel to wipe the body and cover it after cleaning, then place it in the ventilation condition.
The lid is not allowed to be put in the water cleaning, but it can direct flushing. Then wipe and dry.
Can add proper water into the cup, press the function key to select the clean function, and then press the on/off to auto-matically stir and
This machine shall be often used, so as to keep the motor dry and clean.
If not use for a long time, please store this machine in a dry and well-ventilated place so as to prevent the motor from being damped and getting moldy.
Do not wash the main machine. When cleaning, only wipe with the wet cloth. Other components may be washed directly with water, such as the food pusher, cover middle seat, pulp container, and juice nozzle cover.
If this product needs to be repaired during use, please contact our Customer Service Department. Be sure not to take apart or repair the product by yourself to avoid risks.
Household and Indoor use only.

SAFETY PRECAUTIONS

Before use, please read the instructions carefully.
Please refer to the instructions and recipes to select the corre-sponding functions and amount of ingredients.
Before use, ensure that the voltage used is consistent with the rated voltage on the nameplate.
If the power supply cord is damaged, it must be replaced with a special cord or a special component purchased from its manufac-turer service department.
The product should be kept out of reach of children during use.
Please operate the product on the horizontal table surface, do not operate the product on the carpet, towel, or other fabrics, and keep away from the edge of the table to prevent falling.
Do not put the product in a high-temperature environment near the gas stove or cooking stove.
Do not use the product near flammable objects, such as curtains or window screens.
Do not use this product near explosive items, such as gasoline.
Do not use accessories (such as cup lids, etc.) not provided by the company about the product model so as to avoid danger.
Do not touch the place with high temperature when the machine is working. Allow to touch the handle and operation panel at low temperature.
Cool the product before installing or removing parts for cleaning.
Do not move the product during work to avoid spillover of food ingredients, resulting in burns and electric shock.
After the work is finished after the motor and blade stop rotating and ensure that the power is disconnected, open the lid, and pour out the food.
The lid of some fruit and vegetable drinks may be stained after a period of time, which is a normal phenomenon. Please feel free to use it.
The stirring blade is sharp. Do not touch the stirring knife with your hands during emptying the heating cup and cleaning.
During the use of the machine, the water added to the food materials shall not be higher than the upper water level, and should not be put more or less, otherwise, it will cause scorching uncooked or overflow.
In the heating mode, do not touch the stainless steel cup and lid to avoid burns.
The machine adopts a high-speed motor and intelligent variable speed control of the power board. It is normal to have intermittent sounds of fast and slow when crushing.
As there is a lid-opening protection device on the cup body do not open the lid during the operation of the machine otherwise the machine will stop working.
Please do not add seasonings granulated sugar, black sugar, etc. in the cup, and body during the process of machine making, so as not to paste the bottom.
Before switching on the power supply, ensure that the lid is installed in place.
During the working process of the product, it is forbidden for any object to reach into the product and touch the blade, motor, and other moving parts to avoid injury or damage to the product.
The working interval of the appliance should not be less than 30 minutes to prevent abnormal heating of the appliance.
For cold juice (without heating), the maximum amount of fruit should not exceed 400g.
When the machine is working the surface temperature of the cup body will rise. Please do not touch the cup directly with your hands, and do not allow children to approach or use it.
Please pay attention to the position of the machine. Do not place it in an unstable position. And need to keep a certain distance from the wall or other items, in order to maintain good ventilation around the machine, to ensure the service life of the machine.
Self-disassembly or refitting is easy to cause unpredicted failures and accidents due to poor assembly.
When cleaning the machine, it is forbidden to wash the outside of the machine directly with water. In order to avoid water failure and unpredictable accidents.
Do not put the machine directly into the refrigerator or freezer, because the sudden cooling and low temperature will produce”condensate water” inside the machine, which is easy to damage the parts of the electrical body and lead to the failure of the body.
This product is intended for domestic use only, not for industrial or commercial use.
After pulping twice, the machine should be allowed to cool for 30 minutes before being used again.
This product comes with an intelligent altitude recognition func-tion which is limited to use below 1500m altitude.
Appliance must not be submerged in water when cleaning the machine.
. Opening the vent cover while blending

Malfunction Analysis

Malfunction	Cause Description	Solution
Odor occurs when first used	The normal condition of the initial use of the
new motor	The smell disappears after a few times of use, it is recommended to

place it in a ventilated place to dissipate the smell.
Ingredients was not broken up enough| The food is too little or too much| Stop the machine and adjust the amount of food.
Insufficient water| Please add water according to the lowest water level.
Liquid overflow| Too much water| Please add water according to the maximum water level.
El| The machine itself is faulty and the sensor is disconnected| Please go to technician for inspection or repair. Please contact us through the after-sales email: mooyeus@outlook.com
E2| The lid of the cup is loose| Cover the lid to the right position.
E3| NTC excess temperature| Over 125 °C or 135°C, it depends on the actual test results.
E4| Low voltage or voltage is instability| Select the corresponding rated voltage of the machine and stabilize the voltage.
E5| Dry burning| Please confirm the proportion of ingredients according to the recipe requirements.
E7| Circuit board failure| Please go to technician for inspection or repair.
Please contact us through the after-sales email: mooyeus@outlook.com
E8| The machine itself is faulty and the sensor is short circuited| Please go to technician for inspection or repair. Please contact us through the after- sales email: mooyeus@outlook.com

If you encounter any problems during the use of the product, you can contact us at mooyeus@outlook.com, and we will solve the problem for you wholeheartedly with professional engineers and a service team.

Mooye
Mooye Made in China