Gnmano J80 Wireless Microphones User Manual

Gnmano J80 Wireless Microphones

Product Information
Thank you for choosing our product. This is a smart wireless microphone that provides professional-grade recording output. It is a plug-and-play device that does not require any app to function. The wireless microphone can be used in various scenarios such as live streaming, Vlog shooting, interviewing, online courses, and more. The microphone consists of a microphone transmitter and a receiver.

Product Usage Instructions

1. Step 1: Connect the receiver to your phone.
2. Step 2: Long press the power button of the microphone for 1-2 seconds and the indicator light will turn green, indicating that The power is successfully turned on.
3. Step 3: When the red light on the receiver is always on, you can turn on your phone’s camera or live streaming apps to use the microphone for sound pickup.

Special Note: The receiver does not have a built-in battery and does not require charging. However, if your phone’s battery is low, you can use the phone’s charging cable to plug into the port on the receiver to charge your phone.
Power Off: To power off the microphone, long press the power button for 1-2 seconds or press and hold the power button for 3 seconds. The indicator light will turn off when the microphone is powered off.
Mute: To mute or unmute the microphone, simply double-click the power button. When muted, the indicator light will flash slowly in green.

Package Contents

• Microphone transmitter x2
• Receiver x1
• Charging cable x2 (only for charging the microphone)
• User Manual x1

This microphone also features noise-reduction capabilities, which are activated when the microphone is powered on.

Introduction

Thanks for choosing our product. This is a smart wireless microphone that provides professional-grade recording output. Plug and play, no app required. Multiple uses: It can be used in live streaming, Vlog shooting, interviewing, online courses,s and other occasions. The wireless microphone consists of a microphone transmitter and receiver. (As shown below)

ID Diagram

1. Windproof net
2. Power button
3. Microphone indicator
4. Port to connect the phone
5. Microphone charging port
6. Port of receiver
7. Microphone clip
8. Receiver indicator
9. The function of O will be explained in detail later,

How to use

Step 1: Connect the receiver to your phone.
Step 2: Long press the power button of the microphone for 1-2 seconds, and the indicator will turn green, which means the power is on successfully.

Step 3: When the red light on the receiver is always on, you can turn on your phone’s camera, and live streaming APPs to use the microphone to pick up the sound.

Special Note
The usage method is as follows: there is no battery in the receiver, no need to charge. When the phone’s battery is low, please use the phone’s charging cable to plug into the port on the receiver to charge the phone.

About UI
Micronbono Tranemittor

Receiver

REVERB MODE: Press the START BUTTON 3 times continuously to enter reverb mode

Product support and listening function

This microphone comes with noise reduction, which will enter the nose reduction mode when it is powered on.

Packing List

Content of packing

1. Microphone transmitter X2
2. Receiver x1
3. Charging cable ×2 (only for charging the microphone)
4. User Manual x1

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>