Dobinsons WA57-580K Crossmember Drop Kit Instructions

June 12, 2024
Dobinsons

Dobinsons WA57-580K Crossmember Drop Kit

Product Information

  • Fitment: Suzuki Jimny 2018 onwards
  • Part Number: WA57-580
  • Manufacturer: Dobinsons Springs and Suspension
  • Location: 58 Hollingsworth Street, North Rochampton, QLD, Australia
  • Contact Email: admin@dobinsons.com

Product Usage Instructions

  1. Remove the original cross member mounting nuts.
  2. Hold the cross member and remove the bolts.
  3. Install plates to the inside of the original cross member bolts with the crush tubes between them.
  4. Install the new bolts, nuts, and washers.
  5. Install the cross member to the inside of the plates as shown.
  6. Tighten the nuts and bolts to factory torque settings.

Install Instructions

NOTE – Installation is always recommended by a competent technician .Dobinsons-WA57-580K-Crossmember-Drop-Kit-fig-1

  1. Remove original cross member mounting nuts
  2. Hold cross member and remove bolts
  3. Install plates to the inside of the original cross member bolts with the crush tubes between them and install the new bolts nuts and washers.
  4. Install the cross member to the inside of the plates as seen below.
  5. Tighten the nuts and bolts to factory torque settings.

Dobinsons Springs and Suspension Hollingsworth Street Australia/USA/UAE
58 Hollingsworth Street

  • Fitment Suzuki Jimny 2018 on
  • Part Number WA57-580

NORTH ROCHAMPTON QLD AUSTRALIA
admin@dobinsons.com

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Dobinsons User Manuals

Related Manuals