Poounur P66E1 Sport Smart Watch Instruction Manual
- June 12, 2024
- Poounur
Table of Contents
Poounur P66E1 Sport Smart Watch Instruction Manual
Appearance Description
Schematic Diagram of Charging
Operate in strict accordance with the following figures:
1. Please use the product-specific magnetic charging cable to charge by aligning it with the charging contacts on the back of the watch.
2. Do not use a power adapter with a voltage exceeding SV and an output
current exceeding 1 A for charging, as this may cause charging failure and
damage to the magnetic charging Cable or the device.
3. Please activate the watch when it runs out of power before charging: the
watch screen will only light up after about 5 minutes of normal charging.
Introduction to Watch Function
Watch APP Installation and Connection Instructions
As a Bluetooth product, most of the functions of this product need to be connected to a special APP for normal use, such as time display, call alert, and message alert. For Android phones, please do not use Bluetooth to connect and pair with the watch directly. Please scan the following QR code to select the version suitable for your mobile phone system or enter main application markets to download and install Glory Fit.
Device Connection
Before using the APP, please turn on the mobile phone Bluetooth and mobile phone GPS positioning to obtain the mobile phone positioning permission. After the connection is successful, it will prompt
• To pair with: P66D” , please select pairing.
The watch connection operates as follows:
Precautions
- No charging with water stains.
- This product is an electronic monitoring product, not for medical use, and the measurement data is for reference only.
- It is not recommended to wear in hot water baths and Longtime swimming.
- Please charge with the matching charging cable.
FAQ
- Problems such as the watch cannot be searched in the APP, or the watch cannot synchronize with the time of the phone.
Answer:
A. Make sure your phone’s Bluetooth and phone GPS positioning are on before using it for the first time.
B. Users need to open the APP to obtain positioning permission (Phone Settings -Applications).
C. If the watch has already been paired with a Bluetooth connection rn the phone, please cancel the pairing first and then search for the connection in the APP.
D. If the watch is not used for a long time, the Bluetooth will go into a dormant state. Please turn off the Bluetooth of the watch and the phone, reopen it after about 1 minute, and try to search the connection in the APP again.
E. The watch must be connected to the APP, otherwise, the steps, sleep, time, and other function will not work properly.
2. There is no alert function on the watch.
Answer: For first time use:
For Android users: Please operate according to the page prompt, or open the
information reminder function in the APP, and open the APP notification
permission according to the prompt
For Apple users: After the watch is connected to the APP, the phone will pop
up a pairing request, please choose to allow pairing and turn on the switch of
the application reminder that you need to use in the APP. Please open the
“Notification Center• in the application you need to use via
Phone Settings – Notification.
3. The reminder switch is turned on, but there is no reminder on the watch,
or the reminder is sporadic.
Answer:
If the phone turns on the message notification and the corresponding
notification permission according to the above tips, the Bluetooth is kept on,
and the APP and the watch are kept connected, maybe the system authorized APP
alert function is not working, and the user needs to re-check the message push
function.
4. Android’s phone Bluetooth often disconnects or has no message alert
after a period of connection.
Answer:
Android will from time to time clean up the phone’s backstage applications or
applications that consume more power for smooth system operation. If the APP
is not set to allow backstage running, it will be easily cleaned by the system
and the Bluetooth will drop out Different Android phones have different
methods for APP backstage running settings. As in the Huawei nova 8 SE:
Settings – Battery – Power Consumption Ranking – APP -Application Launch
Management – Manually manage to tum on backstage running.
Activation & Warranty
Support for 24 months to replace damaged, defective, upgraded or missing items
(no need to return the original). Please activate via email below within 1 s
days. poounurservice@hotmail.com
Read More About This Manual & Download PDF:
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>