MARS GAMING MMIC-XT Professional Studio Microphone User Manual

MARS GAMING MMIC-XT Professional Studio Microphone User Manual

MMIC-XT will work with whatever software you use to stream, record or voice call. Simply plug the mic into your device and select MMIC-XT as your input recording device within your selected software. No drivers are required to take full advantage of all microphone features.

WINDOWS SETUP

1. Connect the microphone to your PC using the USB cable provided
2. Go to start menu and select Control Panel
3. From Control Panel select Hardware and Sound then select Sound
4. On recording tab select MMIC-XT from the device list and click set default
5. Microphone gain can be adjusted on properties > levels
6. On playback tab select the audio device desired to play the computer audio

MAC SETUP

1. Connect the microphone to your PC using the USB cable provided
2. Go to System Preferences
3. From System Preferences select Sound
4. On Input tab select MMIC-XT from the device list
5. Microphone gain can be adjusted on input tab
6. On output tab select the audio device desired to play the computer audio

PACKAGE CONTENT

1. Microphone
2. Pop filter
3. Shock-mount
4. USB-C/USB-A Cable
5. Boom arm

SMART LED CONTROL KNOB MODES & RGB LIGHTING MMIC-XT

has a control knob to quickly select pattern modes or mute the microphone, you will be able to know which mode is selected at all times thanks its LED color indicator.

LED STATUS

• GREEN
• BLUE
• RED

MODE

• CARDIOID PATTERN
• NOISE REDUCTION
• MUTE MICROPHONE
• MICROPHONE GAIN
• RGB LIGHTING

KNOB

• Press 2 seconds
• Press 2 seconds
• Tap 1x
• Rotate the knob
• Tap 1x to switch lighting effects

SETTING UP MMIC-XT

1. Put together the microphone to the shock-mount and boom arm.
2. The control knob of the microphone has to point to the audio source, use the shock-mount lever to adjust the tilt angle.
3. Place the microphone at 15-40 cm towards the sound source. Rotate the control knob to adjust the microphone gain volume.
4. Plug the microphone USB to the computer and select MMIC-XT as the audio input device.
   

TROUBLESHOOTING

1. My microphone doesn’t seem to be working:
   Make sure that your USB cable is connected correctly and MMIC-XT is selected as the input device. If problem persists, connect the microphone directly to your computer then restart.

2. My audio recording is not loud enough:
   Increase the microphone gain levels in the audio settings and rotate the knob to increase the microphone gain level, place the microphone closer and make sure that control knob is pointing to the audio source.

Have a question? Contact ussupport@marsgaming.eu

Declaration of conformity /www.marsgaming.eu/en/conformity

Do not use or install near water, moisture or hot surfaces. Unplug the cable and clean only with a dry cloth, do not use aerosol or liquid cleaning agents.
Do not attempt to repair the product yourself, removing the covers will void the warranty. At the end of the product life please dispose this product at your local waste collection/recycling centre.

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>