makita DMC300 76MM Cordless Compact Cut Off User Guide
- June 12, 2024
- Makita
Table of Contents
makita DMC300 76MM Cordless Compact Cut Off
Diagram / Parts List
(IN) DMC300 / 76MM CORDLESS COMPACT CUT OFF
Item
| Sub| Parts No.| Parts Description| Qty| I/C| E/C
No.| Close No.| Remark
---|---|---|---|---|---|---|---|---
001| | 183V87-0| HANDLE SET| 1| | | |
| D10| | INC. 34| | | | |
002
| | 620549-0| LED CIRCUIT| 1| | | |
003| | 643874-2| TERMINAL|
1
| | | |
004
| | 8119H1-1| DMC300 SERIAL NO. LABEL| 1| | | |
005| | 650027-6| SWITCH C3JW-4CM-R| 1|
| | |
006
| | 231433-0| COMPRESSION SPRING 4| 1| | | |
007| | 413F56-4| LOCK OFF BUTTON|
1
| | | |
008
| | 413F52-2| F/R CHANGE LEVER| 1| | | |
009| | 232747-0| LEAF SPRING| 1|
| | |
010
| | 632T84-6| SWITCH UNIT| 1| | | |
011| | 413F55-6| SWITCH BASE| 1| |
| |
012
| | 265C51-0| HEX. SOCKET HEAD BOLT M5X12| 1| | | |
013| | 224624-0| OUTER FLANGE 25| 1|
| | |
014
| | 224623-2| INNER FLANGE 25| 1| | | |
015| | 266556-5| TAPPING SCREW 3X12| 4|
| | |
016
| | 347979-7| PLATE A| 1| | | |
017| | 162B46-7| WHEEL COVER 76| 1| | |
|
018
| | 422870-1| FELT RING 18| 1| | | |
019| | 619755-2| ROTOR| 1|
| | |
020
| | 629B23-7| STATOR| 1| | | |
021| | 620J17-3| CONTROLLER| 1| |
| |
022
| | 652069-6| FLAT HEAD SCREW M3X6| 3| | | |
023| | 266490-9| TAPPING SCREW PT 2X6| 3| |
| |
024
| | 413F51-4| CAP| 1| | | |
025| | 347978-9| SHAFT LOCK| 1|
| | |
026
| | 232472-3| COMPRESSION SPRING 2| 2| | | |
027| | 183X33-5| MOTOR HOUSING SET| 1| |
| |
| D10| |
INC. 30
| | | | |
028
| | 266429-2| TAPPING SCREW 3X16| 4| | | |
029| | 347980-2| PLATE B|
1
| | | |
030
| | 183X33-5| MOTOR HOUSING SET| 1| | | |
| D10| | INC. 27| | |
| |
032
| | 8119G4-8| DMC300 NAME PLATE| 1| | | |
034| | 183V87-0| HANDLE SET| 1| | |
|
| D10| | INC. 1| | | | |
035| | 422880-8| DUST COVER| 1| | |
|
036
| | 266429-2| TAPPING SCREW 3X16| 6| | | |
A01| | 122C54-6| DUST COLLECT COVER ATTACHMENT| 1| |
| |
| C10| 265760-3| THUMB SCREW M5X10| 1| | | |
| C20| 267010-2| FLAT WASHER 5| 1| | | |
| C30| 413F54-8| CLEAR COVER| 1| | | |
| C40| 265C71-4| TAPPING SCREW 3X6| 2| |
| |
A02
| | D-77263| DIAMOND WHEEL 76X10 MM RIM| 1| | | DP811|
A02-1| | D-77263| DIAMOND WHEEL 76X10 MM RIM| 1| O| DP811| |
A03
| | D-74837| TUNGSTEN CARBIDE GRIT 76X10MM| 1| | | |
A04| | D-74815| CUTTING WHEEL/THIN THICKNESS| 1|
| | |
A05
| | 783202-0| HEX. WRENCH 4| 1| | | |
A06B| | 450128-8| BATTERY COVER| 1| | | |
A07B
| | ***DC18RC| DC18RC FAST CHARGER| 1| | | |
| D10| | COMPO-PARTS| |
| | |
A08B
| | 197605-6| BATTERY BL1830B SET| 2| | | |
A11B| | 821550-0| CONNECTOR PLASTIC CASE (TYPE2)| 1|
| | |
| C10| 453974-8| LATCH| 4| | | |
A12B| | 8354E7-4| INNER TRAY| 1|
| | |
A: DMC300Z(N)
B: DMC300RFJ(H)| Interchange
O : Yes
X : No
< : the new part can be substituted for the current.
: the current part can be substituted for the new.
S : Interchangeable as a set.