serenelife SLDBHOLD Weight Plate Rack with Barbell Holders User Guide
- June 12, 2024
- serenelife
Table of Contents
serenelife SLDBHOLD Weight Plate Rack with Barbell Holders
Product Information
- Main Pole (A) – 1 piece
- Weight Plates Holder Bars (B) – 3 pieces
- Center Brace Bar (C) – 1 piece
- Side Base (D) – 2 pieces
- Rubber O Ring (E) – 6 pieces
- Knob (F) – 3 pieces
- M10 Nut (G) – 8 pieces
- M10 Bolt (65mm) (H) – 4 pieces
- M10 Bolt (90mm) (I) – 4 pieces
- Wrench (J) – 2 pieces
- Washer (K) – 16 pieces
For more information and support, visit www.SereneLifeHome.com
Product Usage Instructions
Assembly Instructions:
-
Connect the main pole (A) with the center brace bar (C) using the provided M10*65mm bolts. Ensure a tight and secure connection.
Note: Install the bolt from the bottom of the center brace bar. -
Connect the center brace bar (C) with the two side bases (D) using the provided M10*90mm bolts. Ensure a tight and secure connection.
-
Install and center the three weight plate holder bars (B) into the main pole (A). Secure the bars using the knobs (F).
-
Place the rubber O rings (E) onto the weight plate bars.
If you have any questions or require further assistance, please contact us:
- Phone: (1) 718-535-1800
- Email: support@pyleusa.com
- Website: www.SereneLifeHome.com
Features
- Easy to assemble
- 2-In-1 Rack Holder
- Heavy Duty Gym Organizer
- Durable Steel Construction
- Compact and Space-Saving Design
- Made of Durable Steel for Higher Weight Capacity
- Frames with Powder-Coat Finish
- Resist Scratches, Stains
- Measured and Designed for the Most Practical Storage Space
- Come with 4 Barbell Holders for Better Stability and Practical Usage
What’s in the Box
- (1) Main Pole
- (3) Weight Plates Holder Bars
- (1) Center Brace Bar
- (2) Side Base
- (6) Rubber O Ring
- (3) Knob
- (8) M10 Nut
- (4) M10 Bolt (2.6’’ -inches)
- (4) M10 Bolt (3.5’’ -inches)
- (2) Wrench
- (16) Washer
Technical Specs:
- Construction Materials: Steel
- Load Capacity: 800
- Weight: 2 lbs.
- Product Dimensions (L X W X H): 6“ x 23.2″ x 43.7″ -inches
Assembly Instructions
- Connect the main pole ( A ) with the center brace bar ( C ) and firmly tighten and secure by provided M10* 65mm bolts. ( Note: Install the bolt from the bottom of the center brace bar)
- Connect the center brace bar ( C ) with 2 side bases ( D ), and firmly tighten and secure by provided M10*90 mm bolts.
- Install and center 3 weight plates holder bars ( B ) into the main pole ( A ), and secure the bars by knob ( F ). Place the rubber O rings ( E ) into weight plates
California Prop 65 Warning
WARNING:
This product contains Lead And Cadmium which is known to the state of
California to cause cancer birth defects and other reproductive harm. Do not
ingest. For more info go to:
www.P65warnings.ca.gov
Questions? Comments?
We are here to help!
- Phone : (1) 718-535-1800
- Email : support@pyleusa.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>