Oakcastle DVD 120 Portable Player User Manual

: June 12, 2024
: MAJORITY

Oakcastle DVD 120 Portable Player

USER MANUAL

Box Contents

A. DVD 120 Portable Player
B. Remote Control
C. AC Adapter
D. Car Charger
E. 3-in-1 AV Cable

Box Contents

Controls and Functions

Top View

Top View

LCD ON/OFF
Vol- / Vol+
Stop
Menu
Mode
Setup
Direction Keys
OK
DVD/USB/SD
Forward/Reverse

Side View

1.DC in power port
2. ON/OFF
3. AV In
4. AV Out
5. Headphone port
6. SD Card
7. USB

Remote Control

Mode
DVD/USB
Number Pad
Setup
Menu
OK
Audio
Repeat
Slow
Fast Rewind
Previous
Play/Pause
Zoom
Power
TFT ON/OFF
Volume +/-
Mute
OSD
Go to
Return
Up/Down/Left/Right
Subtitle
Title/PBC
Angle
Fast Forward
Next
Stop

Instructions Guide

Connection

Power Supply & Charge

Connect to mains power supply with AC Adaptor, to play using mains power supply or to charge internal battery. Battery charge will show as red light on front panel. When fully charged, the red light will dim Note – When plugged on to the mains the DVD player will also charge the battery while playing.
Connect to car power supply with Car Adaptor, to power device using car power supply or to charge internal battery. Battery charge will show as red light on front panel. When fully charged, the red light will dim. Note – When plugged on to the mains the DVD player will also charge the battery while playing.
Internal Battery Power – If the DVD player battery is fully charged, do not connect the device with AC Adaptor or Car Adaptor. The DVD player will play using its internal charged battery. When battery level is running low, an icon indicating the battery level will flash on the DVD player screen. To maintain power supply when the battery icon is flashing, connect the DVD player with AC Adaptor or Car Adaptor for charging. supply, and to charge battery

Battery

DVD120 has a high-capacity built-in lithium rechargeable battery of 2500mAH which will last for 5 hours when the Battery is fully charged.

Please note: Battery should be fully charged for at least 6 hours before first time use on battery.

Before charging make sure DVD120 is switched off. The charging indicator LED will change from RED to OFF indicating that the battery has been fully charged. When the unit is ON, the LED turns GREEN.

DVD120 can also be powered with its Car Charger or AC Power adapter. If you choose to use DVD120 plugged on, you can simply plug and play with either of these 2 power cables included in the box.

Setup Page

Menu Operation

Press [Setup] on the remote control or on the unit to show the setup menu
Press [Left] or [Right] to select an item. The submenu of the selected item will be instantly shown.
Press [up] / [down] to select an item in the submenu then press [OK] / [Enter] to enter, use [up] / [down] to select an option then press [OK] / [Enter] to confirm it or press [Left] to cancel.
Press [up] / [down] to continue to set other items in the submenu.
Press [left] to go back to the superior menu of the current one.
Press [setup] again and press [enter] / [ok] to exit the setup menu.

General Setup

TV DISPLAY

4:3 Normal/ PS Panscan
If the unit is connected to an conventional Tv set, the wide screen image will be displayed on the screen in its native aspect ratio with some part on the left and right cut off.
4:3 Normal / LB Letterbox
If the unit is connected to a conventional TV set, the wide screen image will be displayed in it’s native aspect ratio with black borders on the top and the bottom side.
16:9 wide
Select this option if the unit is connected to a wide-screen Tv set, The wide- screen image will be displayed in full screen in it’s native aspect ratio while the 4:3 image will be stretched out horizontally to fit in the screen.

ANGLE MARK

1. Set this item to ON. When a disc encoded with multiple camera angles is playing the angle mark will display on the screen. Then you can view the video of different camera angles by pressing [Angle] on the remote control.

**This function only works with those discs encoded with multiple camera angles

2. Set this item to OFF to disable this function.

OSD LANGUAGE (ON SCREEN DISPLAY)

Set this on-screen display language in this item.

SCREEN SAVER

ON: if the image remains motionless on the screen, for several minutes, a screen saver will appear on the screen. You can press any key or button to wake up.
OFF: Turn off the screen saver function

LAST MEMORY

ON: Each time you turn off the unit or stop the disc it will memorize the last play duration. Next time you turn on the unit and play the same disc the unit will play from that memorized point.
OFF: Disable the last Memory function.

MP3 LYRIC

If you want to show the lyrics of a song, Please load lyrics and music as the same name in USB or memory card before performing this function.

Choose mp3 file.
Download the corresponding lyrics with the extension “lrc” from the internet or create it with lyrics file editor.
Rename the lyrics file. Make sure that the lyrics filename is the same as the music file.

Audio Setup Page

The Audio menu allows you to change the audio setup of the DVD.

Down Mix: Set down mix to LT/RT stereo
Dual Mono: Set down stereo, L-Mono , R-Mono, or Mix-Mono.
Dynamic: Full 3/4, 1/2, 1/4, OFF

Panel Quality Setup

The video menu allows you to change the display properties of the DVD.

Sharpness: Adjust the screen sharpness.
Brightness: Adjust the screen brightness
Contrast: Adjust the screen contrast
Saturation: Adjust the screen saturation
Hue: Adjust the screen Hue
Aspect Ratio: Setup panel display to 16:9 or 4:3

Preference Page

The preference menu option allows you to adjust the default DVD disc setting. (The setting is only available when no media is inside the unit.)

TV Type: Set Tv type to PAL, AUTO or NTSC.
Audio: Set the default audio language
Subtitle: Set the subtitle Language
Disc Menu: Set the disc menu language.
Parental: When setting a rating level a password screen is shown follow the on-screen instructions. Do Not forget this password.
Password: Enter the default password 0-0-0-0 the set your password.
Default: Return the portable DVD to factory default beyond the maximum output of the speaker in sound effects processing.

Warranty

Register your Majority product within 30 days of purchase to activate your extended 3 Year Warranty. Gain access to all the benefits and lifetime technical support (see our Extended Warranty details for more info).

Specifications

Brand	Oakcastle
Model	DVD120
Functions	USB, CD, AUX IN,
Frequency Response	20 HZ 20 KHZ
Output	Output: 12V/1.0A
Video Output	1 Vp-p75 Ohm unbalanced
Audio Output	1.4 Vrms/10 kohm
Supported Disc Formats	CD, CDR, HDCD, MP3, CD-RW, DVD+R, DVD+RW,
Dynamic range	85db

Safety Info

IMPORTANT

Please read all instructions carefully before use.

WARNING

Risk of electric shock. Do not open.

Read these instructions:
Heed all warnings.
Follow all instructions in the user manual.
Do no clean the apparatus near or with water.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
Protect the power from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
Only use attachments/accessories specified by the manufacturer.
Unplug this apparatus during light storms or when unused for long periods of time.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in a way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to the rain or moisture, does not operate normally or has been dropped.
No naked flame sources, such as lit candles, should be placed on the apparatus.
Dispose of used electrical products and batteries safely according to your local authority and regulations.

Addition Warnings

The apparatus shall not be exposed to dripping or splashing and no objects filled with liquid, such as vases, shall be places on the apparatus.

Main plug is used to disconnect device and it should remain readily operable during intended use. In order to disconnect the apparatus from the main power completely, the power plug should be disconnected from the main socket outlet completely.

Battery shall not be exposed to excessive heat such as sunshine, fire or the like.

Recycling Electrical Products

You should now recycle your waste electrical goods and in doing so help the environment. This symbol means an electrical product should not be disposed of with normal household waste. Please ensure it is taken to a suitable facility for disposal when finished with.