Kmart IM-43106066-RC RC WIFI Folding Quadcopter User Manual

Kmart IM-43106066-RC RC WIFI Folding Quadcopter

BLADE PROTECTOR INSTALLATION METHOD

QUADCOPTER

REMOTE CONTROL

BATTERY INSTALLATION

1. Unscrew to open battery cover, insert 4x 1.5V AA batteries. (see Diagram 1)
2.  Replace battery cover. Attention: Remove batteries after you have finished using your product.

LITHIUM BATTERY CHARGE INSTRUCTIONS

Attention: Do not charge battery immediately after each play, let the battery cool down for a while.

1.  Press and hold the quadcopter power switch a second to turn off the quadcopter.
2.  Connect USB charging cable plug with quadcopter charging interface, see Diagram 2.
3. Put the cable into the computer UsB interface. The USB indicator lights up when it has started charging.
4. Once the indicator light turns off, the battery is fuly charged. Unplug the USB charging cable from computer USB interface and disconnect with quadcopter.

CONTROL METHOD

Attention: Select a large, wide-open area for flying, and make sure that there are no obstructions animals, people or overhead powerlines nearby. Do not operate the quadcopter in strong wind, rain or snow etc.

1. Press and hold the quadcopter power switch for a second to turn on the quadcopter, the LED light on the quadcopter wil be lashing. Ensure you are least 2 metres from the back of the quadcopter.
2. Set the power on the remote control to “ON”.
3. Push the throttle lever up, you wil hear one beep sound. After this, push it down and you wil hear a beep sound again. If the power indicator on the quadcopter stops flashing, the paiing is successful. If pairing is not successful, please repeat steps 1-3.
4. The quadcopter’s gyroscope needs to be calibrated after pairing. Pull the throttle lever and direction lever to the lower right at the same time (see Diagram 3). You will hear one beep sound and the LED light on quadcopter will change from flashing to steady lighting. This means that the calibrating is successful.
5. There are two ways to fly/ launch the quadcopter: Normal mode: Pull the throttle lever to the lower left and the direction lever to the lower right at the same time (see Diagram 4), the quadcopter will unlock while the propeler starts to work. Altitude hold mode: No need to unlock the quadcopter, press the one key take off / landing button after pairing the quadcopter. The quadcopter will automatically rise to a height of about 1.5 metres. Now you can operate your quadcopter.

HOW TO CONTROL THE QUADCOPTER

FLIPPING THE QUADCOPTER

Tip: Ensure the quadcopter flying height is at least 3 metres from the ground when you perform a 360 degree flip function.

HEAD Less MODE

In headless mode, any side of the quadcopter can be treated as the front of the quadcopter.
How to transfer normal state to headless mode:

1.  You can enter headless mode during stable flying or before flying.
2. Press the headless mode button, you wil hear a beep sound, the LED light on quadcopter wil be lash, that means the quadcopter has entered headless mode. You can play the quadcopter under headless mode now.
3. Press the headless mode button again, you will hear a beep sound, the LED light on quadcopter will be lit, the quadcopter will turn back to the nomal flying mode.

HOW TO CHANGE THE SPEED MODE

1. Low speed mode: It is the default speed mode of quadcopter.
2.  Medium speed mode: Press the speed button, the quadcopter will be in the medium speed mode when you hear two beep sounds.
3. High speed mode: Press the speed button again, the quadcopter wil be in the high speed mode when you hear three beep sounds, Press the speed button again, the quadcopter will go back to the low speed mode when you hear a beep sound.

HOW TO TRIM THE QUADCOPTER

Slowly raise the throttle stick and let the quadcopter lif-off the ground, you can use the trim to correct the action if the quadcopter leans to the wrong direction

1. If the quadcopter drifts forward, press the backwards trim button as shown in Diagram 5 to trim it backwards until it stops drifting. If the quadcopter drifts backwards, press the forward trim button as shown in Diagram 5 to trim it forward until it stops drifting.
2. If the quadcopter drifts to left, press the right trim button as shown in Diagram 6 to trim it to right untl it stops drifting. If the quadcopter drifts to right, press the left trim button as shown in Diagram 6 to trim it to left until it stops drifting.

HOW TO LAND THE QUADCOPTER

There are two ways to land the quadcopter.

1.  Press the one key take off / landing button to land the quadcopter.
2.  Hold the throttle lever down until the quadcopter land on the ground.

WIFIVAPP USAGE

Mobile phone holder installation (the mobile phone is not included):

1. Slide moble phone hokder into controler, see Diagram 7.
2. Push up the mobile phone holder to afix the mobile phone, see Diagram 8-9.

WIFI Connection description
Please download and install the software SKY-Drone720p or scan the QR code for Google Play &IOS App Store bebw.

Connect description:

1. Ensure the quadcopter has been turned on.
2. Turn on WIFI on mobile phone, choose the network Drone720p-XXXXXX* and connect.
3. Once the WIFI connection is successful, launch the App SKY-Drone720p. Please note that connection to the quadcopter’s WIFI wil disrupt the existing WIFI connection you may be using.
4. After App SKY-Drone720p is launched successful, pair the quadcopter to remote control, see CONTROL METHOD on page 2.
   Attention: Use the remote for navigating and holding a phone to capture images and avoid footage.

Control interface description:

1. Take Pictures
2. Take Videos
3. Viewing Pictures/Videos
4. Screen Rotation

WARNING

• Please follow the instructions for correct installation and use. Some parts require assembly by an adult.
• The product contains small parts and is a choking hazard.
• Do not touch the hot motor and batteries.
• Do not touch working propellers.
• Do not fly towards yourself or other people.
• Adut supervision is required.
• Throw away the packaging material straight away, as this can cause harm to children.
• Non rechargeable batteries are not rechargeable.
• To charge the rechargeable battery., t will need to be done by an adult.
• Do not mix old and new batteries or tbatteries of diterent types.
• Do not short caircuit the battery or put the battery in fire.
• Do not leave the toy unatended whle charging it
• When the battery is low, please returm the quadoopter and recharge it.
• Charge the toy on non-flammable surface and keep it away from flammable items.
• Turn the charger off when the toy’s battery is charged, and always unplug it from the toy.
• If the toy has been damaged, immediately stop use, unplug, and safely move the toy away from flammable materials.
• Follow the manufacturers instructions for charging the toy. Do not charge longer than recommended. Do not use the product for a long time. Remove the battery after use.
• To avold injury. do not touch the rotating parts. iact or drop the drone or remote control
• Do not imPuse a clean soft cloth to clean the product.
• The user has the responsibility to ensure that the product will not cause harm to hermsves or ou
• The manufacturers and dealers do not bear any responsibillty for injuries or damage 1o propoy aua y
• The packaging and instructions contain important information of products, please keep for future reference.
• Only Tty during the day and keep your quadcopter within visual ine-ol-signt. This means being atDle to see the quadcoper witn your om eyes (raner tnan tnirougn a oevice) at al ue5
• Do not ty your quadcopter higher than 120 metres (400t) above the ground.
• Keep your quadoopler at least Su metres away rom oner peopie.
• *Do not iy your quadcoper over or near an area aneung puDuc SEy Or wnere emegenuy operduons are uneay
• (wItnout pri0r approval). Tnis coud inciude situations sucn as a car crasn, polce operaions, 8 Tire and a550clated Ggng9 enoris, and search and rescue. Oy ty one quadcopler at a time.
• Do not fy Over or above people. This cOuld incude beaches, paks, events, or sport ovals where there is a game in progress.
• Keep at least 5.5km away from control led aerodromes if your quadcopter weighs more than 100g. Flying within
• 5km of a non-controlled aerodrome or quadcopter landing site (HLS) is possible, but only if no manned aircraft are
• perating to or from the aerodrome. f you become aware ot manned aircraft operating to or from the aerodromeiHLS,
• you must manoeuvre away from the aircraft and land as soon as safely possible.
• Do not operale your queadcopler in a way that creates a nazard to anoiner aircrart, person Or property.
• Respect personal privacy do not record or photograph people without their consent-this may breach state laws.
• Important information for quadcopter Users.
• Quadcopter must be kept in clear sight of the operator’s own eyes and not through a device (such as VR goggles) at all times. For more information on quadcopler use, please see droneflyer.gov.au

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>