Mtech LEVI-M01 Ultralight Gaming Mouse User Manual
- June 12, 2024
- Mtech
Table of Contents
LEVI-M01 Ultralight
Gaming Mouse
User Manual
Mtech LEVI-M01 Ultralight Gaming Mouse
| ①Left Click | ②Right Click |
|---|---|
| ③Scroll Wheel | ④Battery Indicator |
| ⑤Charging Port | ⑥DPI Indicator |
|---|---|
| ⑦DPI Button | ⑧Power Switch |
| ⑨USB Dongle Compartment |
| ⑩Forward Button | 11 Back Button |
|---|
Product Specification
| Model | LEVI MO1 |
|---|---|
| Interface | USB-2.4G |
| Sensor | Pixart 3370 |
| DPI | Max 19000 |
| Polling rate | 1000Hz |
| Button | 6 buttons |
| Battery | 240mAh |
| Weight | 65±5g |
| Size | 1086635mm |
DPI Level
| 400 | 800 | 1200 | 1600 |
|---|---|---|---|
| Red | Blue | Green | Orange |
| (Default) |
Software supports DPI adjustment:
DPI>10000, 50dpi stage
DPI>10000, 100dpi stage
Toggle Switch
OFF: Wired Mode(default)
2.4G: Wireless Mode
Connection Setup
-
Wired Mode:
Slide the toggle switch to “OFF”, plug in the cable, and the mouse automatically starts up. The default DPI value is 800dpi. -
2.4g Mode:
Slide the toggle switch to “2.4g”, plug the dongle into the USB port and the mouse will automatically link to the device.
The default DPI value is 800 DPI.
Battery/Power
- Charging: Indicator blinks green while charging; Solid green when fully charged.
- Low Power Value: When the power is below 15%, the indicator blinks red; When the power is below 1%, the mouse automatically shuts down.
- Auto-sleep: For battery savings, light sleep will be enabled after three (3) minutes of inactivity (move mouse to wake up). Meanwhile, deep sleep will be enabled after thirty (30) minutes of inactivity (click any button to wake up).
Software Configuration
- You can download the LEVI M01 software to further customize your mouse. The software allows you to have access to DPI value, indicator color, polling rate, lift off distance, button remapping, macro and more.
- Download link: www.mtechshop.com/software
Packaging List
- LEVI M01 X 1
- USB Adaptor X1
- USB Extension X 1
- Charging Cable X 1
- Grip Tape X 2
- Manual X 1
- Extra Mouse Feet X 1
- Sticker X 2
Support/Service
- If you have any questions and/or concerns, you may reach us through our website www.mtechshop.com.
FCC Warning Statement
- Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. This equipment has been tested and found to comply with the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful nterference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
‐‐ Reorient or relocate the receiving antenna.
‐‐ Increase the separation between the equipment and receiver.
‐‐Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
‐‐ Consult the dealer or an experienced radio/TV technician for help.
Operation is subject to the following
two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>