Your FPV Drones C013872 Chimera5 Pro V2 FPV Instruction Manual

Your FPV Drones C013872 Chimera5 Pro V2 FPV

Product Information

The Chimera5 Pro V2 is a drone frame assembly kit that includes various components for building a high-performance drone. It comes with the following parts:

• Bottom plate x1
• Counter plate x1
• Top plate x1
• Front arm x2
• Rear arm x2
• Camera side plate x2
• Camera vibration dampers silicone x1
• Arm guard TPU x4
• Antenna TPU x1
• GPS mount TPU x1
• GPS TPU x2
• Receiver mount TPU x1
• LED logo TPU x1
• XT60 Battery Plug PCB x1
• M2*25 Al. standoff x3
• M2*23 Al. standoff x3
• M2*19 Al. standoff x4
• M1.6*10 socket head cap screw x4
• M2*6 hex screw x16
• M2*8 hex screw x6
• M2*5 hex screw x5
• M2.5*10 hex screw x4
• M3*25 hex screw x4
• M2*8 self-tapping hex screw x2
• M2*7 hex screw x20
• M2*8 wash head hex screw x2
• M2*5 self-tapping hex screw x4

Additional parts included in the kit are:

• Motor wire protector x4
• 15*200 Battery strap x1
• 15*250 Battery strap x1
• Antenna mount plastic x1
• M2 nylon nut x2
• Power cable x2
• Sticker x1
• Battery pad x1
• M5 nut x1
• M5*20 hex screw x1
• Allen wrench x1
• M3 lock nut x5
• GoPro bottom stand TPU x2
• Antenna mount 2T.4PGUHz2.4GHz x2
• Antenna mount 9T15PUMHz915MHz x2
• M3*20 hex screw x1

Product Usage Instructions

To assemble the Chimera5 Pro V2 drone frame, follow these steps:

1. Start by attaching the bottom plate to the counter plate using the provided screws.
2. Attach the top plate to the assembled bottom and counter plates.
3. Attach the front arms and rear arms to the corresponding mounting points on the frame.
4. Attach the camera side plates to the frame using the provided screws.
5. Install the camera vibration dampers silicone onto the designated area of the frame.
6. Attach the arm guards to the arms of the frame.
7. Mount the antenna TPU and GPS mount TPU onto the designated areas.
8. Secure the GPS modules onto the GPS mounts using the provided screws.
9. Attach the receiver mount to the frame.
10. Install the LED logo TPU on the designated area of the frame.
11. Connect the XT60 Battery Plug PCB to the frame.
12. Attach the Al. standoffs to the frame using the corresponding screws.
13. Secure all other components using the provided hex screws, self-tapping hex screws, and wash head hex screws.

Note: Refer to the user manual or manufacturer’s instructions for more detailed guidance on assembling and configuring the drone.

Frame Assembly Guide

1. Bottom plate x1
2. Counter plate x1
3. Top plate x1
4. Front arm x2
5. Rear arm x2
6. Camera side plate x2
7. Camera vibration dampers silicone x1
8. Arm guard TPU x4
9. Antenna TPU GPS x1
10. GPS mount TPU x1
11. GPS TPU x2
12. Receiver mount TPU x1
13. LED logo TPU x1
14. XT60 Battery Plug PCB x1
15. M2*25 Al. standoff x3
16. M2*23 Al. standoff x3
17. M2*19 Al. standoff x4
18. M1.6*10 socket head cap screw x4
19. M2*6 hex screw x16
20. M2*8 hex screw x6
21. M2*5 hex screw x5
22. M2.5*10 hex screw x4
23. M3*25 hex screw x4
24. M2*8 self-tapping hex screw x2
25. M2*7 hex screw x20
26. M2*8 wash head hex screw x2
27. M2*5 self-tapping hex screw x4

Additional parts

1. Motor wire protector x4
2. 15*200 Battery strap x1
3. 15*250 Battery strap x1
4.  Antenna mount plastic x1
5.  M2 nylon nut 2x
6.  Power cable 2x
7.  Sticker 1x
8. Battery pad 1x
9.  M5 nut 1x
10. M5*20 hex screw 1x
11. Allen wrench 1x
12. M3 lock nut 5x
13. GoPro bottom stand TPU 2x
14. Antenna mount TPU（2.4GHz）x2
15. Antenna mount TPU（915MHz）x2
16. M3*20 hex screw 1x

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>