CROWD CONTROL MX630R Retractable Belt Barrier Stanchion Instruction Manual
- June 12, 2024
- CROWD CONTROL
Table of Contents
MX630R Retractable Belt Barrier Stanchion
Instruction Manual
www.crowdcontrolwarehouse.com
877-885-1600
INSTALLATION INSTRUCTIONS
REMOVABLE-BASE FLOOR MOUNT
Required Tools
|
---|---
Goggles| 3¾” Dia. Hole Saw Drill
PARTS LIST
1| Floor Mount – Socket|
---|---|---
2| Floor Mount – Flush Cap|
3| Floor Mount – Plug Sleeve|
4| Hex Botl M12x90mm|
5| Post| 
STEP 1:
Determine post location and mark floor for position. Using a 3 ¾” diameter
Hole Saw, drill a hole 5″deep to allow floor socket to fit inside hole
STEP 2:
Fill hole with cement halfway.
STEP 3:
Insert Floor Socket and wiggle it down until the bottom of the top plate is
level with the ground.
STEP 4:
Quickly clean any overflow cement. 
STEP 5:
Install Hex bolt into Plug Sleeve
STEP 6:
Install Post into Plug Sleeve
STEP 7:
Remove Flush Cap from Floor Socket
STEP 8:
Allow cement to dry thoroughly before inserting post.
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>