boAt Aavante Bar 2500 5.1 Channel 180W RMS Sound Bar User Manual

June 12, 2024
Boat

USER MANUALboAt Aavante Bar 2500 5.1 Channel 180W RMS Sound
Bar AAVANTE BAR
5.1 CHANNEL 180W RMS Sound Bar
(with Subwoofer and Satellite Speaker)

Aavante Bar 2500 5.1 Channel 180W RMS Sound Bar

Thank you for choosing the boAt Aavante Bar 2500 as the audio source for your home. Discover a new level of immersive, cinematic audio experi- ence at home with the boat Aavante Bar 2500. With a powerful 180W RMS total output, this sound bar brings every aspect of your entertainment be it a song, show or movie to life. The 5.1 channel sound system provides a balanced surround sound for your movies, music and even video games and you can experience cinematic sound that revolves around you. Stay plugged into the sound with an array of wired connections, USB and Bluetooth® wireless technology. Bring your home to life with the boAt Aavante Bar 2500. We request that this installation guide be carefully read for proper usage of the device.

COMPONENTS LIST

  • Soundbar
  • Wired Subwoofer
  • Adaptor
  • User Manual
  • Screws for Wall-Mount
  • Satellite Speakers (2x)
  • Remote Control
  • AUX Cable
  • Warranty Card
  • Catalogue

SAFETY & WARNINGS

Caution

  • Read the safety, installation and operating instructions in this user guide before operating the product.

  • Power and speaker wires should be routed so that they are not likely to be walked upon, kicked or pressed by items placed on or against them.
    Pay special attention to cords from plugs, power receptacles and the point where they exit from the product.

  • The product should be situated away from hear sources such as radiators, stoves or other products, including amplifiers that produce heat.
    Naked flames such as lighted candles should not be placed on this product.

  • To reduce the risk of fire or electric shock, do not expose the product to dripping, splashing or excessive moisture such s in a sauna or bathroom.
    Do not use this product near water, for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement or near a swimming pool.

  • Never insert objects into this product through openings as they may touch dangerous voltage points or short-circuit parts that could result in a fire or electric shock.

  • Do not use attachments or accessories not included with this product.

  • Do not place this product on an unstable cart, stand, tripod, bracket or table. The product may fall causing serious injury to someone or serious damage to the product. Any mounting of the product should follow the instructions in this user guide.

  • Do not attempt to service this product by yourself, as opening or remov- ing covers may expose you to potentially dangerous voltage or other hazards. Refer all servicing and repairs to qualified service personnel.

OVERVIEW

  1. AUX port
  2. HDMR(ARC) port
  3. Optical port
  4. Satellite right out port
  5. Satellite left out port
  6. USB port
  7. Subwoofer out port
  8. DC in port

boAt Aavante Bar 2500 5.1 Channel 180W RMS Sound Bar -
Overwiew

SOUND BAR CONTROL PANEL

  1. POWER: press to switch on/off the sound bar;
  2. -:Short press to skip to previous track & long press to decrease the volume.
  3. **** :Dll :press to play/pause the music
  4. + :Short press to skip to next track & long press to increase the volume
  5. Mode: Short press to change the modes;

boAt Aavante Bar 2500 5.1 Channel 180W RMS Sound Bar - Overwiew
1

SOUNDBAR PORTS

boAt Aavante Bar 2500 5.1 Channel 180W RMS Sound Bar - Overwiew
2

1| HDMI(ARC)| Use to connect compatible devices using an HDMI cable (not provided
---|---|---
2| OPTICAL IN| Use to connect compatible devices using an optical cable (not provided)
3| SATELLITE PORTS| Used to connect left & right satellite Speakers
4| AUX IN| Use to connect compatible devices using 3.5mm-3.5mm stereo jack cable (provided)
5| USB IN| Use to connect a flash drive for direct MP3 playback (FAT32 format and 64GB max)
6| SW OUT| Use to connect the subwoofer
7| DC IN| Used to connect the DC output jack of subwoofer

LED DISPLAY

1 RED LED Standby Mode
2 bt Bluetooth Mode
3 USB USB Media Mode
4 AUX AUX Input Mode
5 OPt Optical Mode
6 Arc HDMI(ARC) Mode

REMOTE CONTROL

boAt Aavante Bar 2500 5.1 Channel 180W RMS Sound Bar -
Retmot

| Button| Function
---|---|---
1| | Switch on/off the soundbar
2| Mode| To switch between modes -BT, Aux, Optical, HDMI ARC & USB
3| | Previous Track
4| | Play/Pause
S| | Next Track
6| Unpair| Disconnect soundbar from the connected device under bt mode
7| EQ| Switch EQ modes
EQ 1- Music
EQ 2 – Movies
EQ 3 – News
EQ 4 – 3D
EQ 5 – Flat
EQ 6 – Classical
EQ 7 – Rock
EQ 8 – Pop
EQ 9 – Jazz
EQ 10 – Live
EQ 11 – Club
EQ 12 – Dance
By default, EQ 1 stays on.
8| Mute| Mute soundbar
9| Vol-| Decrease volume
10| Vol+| Increase volume
11| Battery Compartment| for AAA batteries

INSTALLATION

  • Place the Soundbar on table or Wall mount it
  • Connect the subwoofer using the subwoofer out port
  • Connect the Left Satellite Speaker to the left speaker port using the provided wire
  • Connect the right Satellites speaker to the right speaker port using the provided wire
  • Place the Satellite speakers at the back side of the room in the left & right orientation

boAt Aavante Bar 2500 5.1 Channel 180W RMS Sound Bar -
Installation

PLACING THE SOUNDBAR ON AN ENTERTAINMENT UNIT

If your TV is placed on an entertainment unit, you can place the soundbar directly in front of the TV stand, centred with the TV screen. If the surface of the table is flat, the soundbar stays firm on its metal feet.boAt Aavante
Bar 2500 5.1 Channel 180W RMS Sound Bar - Intertainment

WALL MOUNTING THE SOUNDBAR

This soundbar can be mounted on your wall. Follow the instructions below:
Note: If you aren’t confident in mounting this product yourself, please seek advice from a qualified trades person.boAt Aavante Bar 2500 5.1 Channel
180W RMS Sound Bar - Intertainment 1

  1. Mark and drill two parallel holes, 500mm apart on the wall. Secure the supplied anchors and screws into the holes. Ensure the screws are protruding Smm from the wall.
    Note: Anchors are only required when mounting onto a solid wall,boAt
Aavante Bar 2500 5.1 Channel 180W RMS Sound Bar - Intertainment
2

  2. Hang the soundbar on the fastening screws.

  3. Gently push the soundbar in a downward direction to lock and secure in place.boAt Aavante Bar 2500 5.1 Channel 180W RMS Sound Bar - Intertainment 3

OPERATION

Power ON/OFF
Utilize the provided power adaptor to connect the DC port of the soundbar to a power socket.

  1. Press the ‘Power’ button to switch on the soundbar; the device automatically enters into Bluetooth mode.
  2. Press the ‘Power’ button again to switch off the device.
    Note: The soundbar gets automatically switched off if there is no operation performed for 15 minutes.

Bluetooth Connectivity

  1. Turn on the soundbar; the device goes into ‘bt” mode by default
  2. 0n your media device under Bluetooth functionality search for “Aavante Bar 2500″ when both the devices are within the Bluetooth transmission range, and select the same to establish Bluetooth connec- tivity (Press ‘000″ if asked for a code)
  3. Once connected, the ‘bt stays stable on the LED display
  4. The soundbar gets reconnected to the last paired device by default within working range whenever the soundbar gets switched on subse- quently
  5. Press the ‘Mode’ button on the soundbar control panel or ‘UNPAIR’ on the remote control to disconnect it from the current paired device.

Playback functionalities under Bluetooth mode

  1. Press the Play/Pause button on the soundbar control panel or “ ” in the remote control to play/pause the music.
  2. Short press the “-* button the control panel to return to previous song and long press the same to decrease volume.
  3. Short press the “+” button on the control panel to skip to next song and long press the same to increase volume.

HDMI (ARC) Mode

  1. Plug in HDMICARC) cable int o the HDMI(ARC) port on the soundbar and plug in the other side to a TV or other media device with HDMICARC) port.
  2. Short press the Mode button in steps to switch to HDMICARC) mode; red LED stays solid indicating HDMI(ARC) mode.
  3. Short press the “-* button to decrease volume.
  4. Short press the “+” button to increase volume.

Optical Mode

  1. Utilize and optical cable to connect the soundbar and TV / other media device with optical port
  2. Short press the Mode button in steps to switch to Optical mode.
  3. Short press “-* to decrease volume.
  4. Short press “+ to increase volume.

AUX Mode

  1. Utilize the provided 3.5mm cable to connect the soundbar to your mobile device.
  2. Short press “Mode” button in steps to switch to AUX mode; indicated by “Aux 1″ on the LED display.
  3. Short press VOL-/PREV button to decrease volume
  4. Short press VOL+/NEXT button to increase volume

USB Mode

  1. Plug in your USB drive into the soundbar’s USB port
  2. Short press “Mode” button in steps to switch to USB mode; indicated by “USB” on the LED display
  3. Short press the “-* button to decrease volume
  4. Short press the “+” button to increase volume

Mode Switch
The mode gets rotated as per the following sequence:
BT-AUX-OPTICAL-HDMI (ARC)-USB

TECHNICAL SPECIFICATIONS

Model boAt AAVANTE BAR 2500
Technology USB. Optical, HOMIARC), AUX. Bluetaoth V5
Drivers Size 2.25×2(FRFL) + 2.25%2(C) + 2.25×2(SRSL) + 5.25’X1(SW)
Number of Drivers 7
Maximum Output RMS IEWx2(FR.FL) + 30WxI(C) + TOWx2(SR.SL) + B0WXI(SW) = 180W

R.M.S
BT Transmission Range| Up to 10m
Bluetooth version| V5.0 + EDR
Dimensions| Soundbar: 65H90D780L mm
Subwoofer: TIBW335H°240D mm
Satellite: 65H
90D*120L mm

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals