TRENDY MIRROR Arch Backlit LED Mirror Instruction Manual

TRENDY MIRROR Arch Backlit LED Mirror

FEATURES

INSTRUCTION FOR BACKLIT LED MIRROR

Please read the instruction carefully before installation, wrong installation may lead to product damage or personal injury.

TOOLS

Installation Instruction

1. On your wall use a spirit level to lightly pencil mark the desired position of the aluminium hanging rail.

2. Align the hanging rail with the level pencil line and mark the centre of the three holes.
   Remove the hanging rail and drill tight fit holes to accommodate the nylon wall plugs. (The nylon anchors are for a plasterboard wall). If drilling into tiles use appropriate drill bits and tile anchors.

3. Insert the nylon wall plugs into the drilled holes. Screw the hanging rail to the wall. (Screws go into the nylon wall plugs)

4. Gently lower the mirror onto the hanging rail.

5. Once pre-installed a qualified Electrician can hard wire the power supply into an existing light switch or a n’ew switch.

6. Brown wire = Liv~ wire, Green & Yellow wire = Earth wire, Blue wire = Neutral wire.

Product parameters

• Input voltage: 220-240V
• Input frequency: 50 Hz
• Color temperature : 3000-6000k
• Waterproof grade: IP44
• Light color: Cool white / Natural white / Warm
• Material: 5mm er:iyii: _onm~r:i!?I p(()tectior:i~ HD silver mirror
• Features: 3 colors changeable light, dimmable brightness, defogging

Operation Instructions

Touch switch

1. Light on/off – interchangeable colours
   Power on, then press to turn the light on, the light is a cool white colour. Press a second time and the light changes to a natural white colour. Press a third time and the light changes to a warm colour. Press again to turn off.

2. Dimming
   Power on, press to turn the light on and hold down the button, the brightness will change accordingly.

3. Demister
   When the light is turned on the electric mirror demister will function.

Electrical Safety Instructions

• Please make sure to turn off the electrical supply during istallation and maintenance.
• It is recommended to pull out the fuse or switch off the circuit breaker before installation to disconnect the necessary circuits.
• DO NOT put hard and sharp materials directly against the mirror surface. This may result in damage or personal injury.
• Never forget to turn off the power supply in stormy days, otherwise electric components of the product could be damaged.
• Please turn off the power supply if the product is not used for a long time.
• DO NOT remove protective film or corner protectors until the mirror is completely istalled.
• DO NOT use outdoors.

PLEASE KEEP THIS MANUAL BOOK FOR FUTURE REFERENCE.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>